null

Human MYL1 / Myosin Light Chain 1 ELISA Kit

SKU:
HUFI02652
Product Type:
ELISA Kit
Size:
96 Assays
Uniprot:
P05976
Sensitivity:
75pg/ml
Range:
125-8000pg/ml
ELISA Type:
Sandwich
Synonyms:
MYL1, Myosin Light Chain 1, Alkali, Fast Skeletal
Reactivity:
Human
Research Area:
Cell Biology
€599
Frequently bought together:

Description

Human MYL1/Myosin Light Chain 1 ELISA Kit

The Human MYL1 (Myosin Light Chain 1) ELISA Kit is specifically designed for accurate detection of MYL1 levels in human serum, plasma, and cell culture supernatants. With high sensitivity and specificity, this kit ensures reliable and reproducible results, making it perfect for a broad range of research applications.MYL1, also known as myosin light chain 1, is a critical protein involved in muscle contraction and movement.

It plays a crucial role in muscle function, making it an important biomarker for studying muscle-related conditions such as myopathies, muscular dystrophy, and muscle injuries. Understanding MYL1 levels can provide valuable insights into muscle health and function, making this ELISA kit an essential tool for researchers studying muscle biology and related diseases.

Product Name:Human MYL1 / Myosin Light Chain 1 ELISA Kit
Product Code:HUFI02652
Size:96 Assays
Alias:MYL1, Myosin Light Chain 1, Alkali, Fast Skeletal
Detection method:Sandwich ELISA, Double Antibody
Application:This immunoassay kit allows for the in vitro quantitative determination of Human MYL1 concentrations in serum plasma and other biological fluids.
Sensitivity:75pg/ml
Range:125-8000pg/ml
Storage:4°C for 6 months
Note:For Research Use Only
Recovery:Matrices listed below were spiked with certain level of Human MYL1 and the recovery rates were calculated by comparing the measured value to the expected amount of Human MYL1 in samples.
MatrixRecovery range(%)Average(%)
serum(n=5)86-10595
EDTA plasma(n=5)91-10495
UFH plasma(n=5)91-10094
Linearity:The linearity of the kit was assayed by testing samples spiked with appropriate concentration of Human MYL1 and their serial dilutions. The results were demonstrated by the percentage of calculated concentration to the expected.
Sample1:21:41:8
serum(n=5)87-105%87-99%93-104%
EDTA plasma(n=5)83-95%88-95%82-100%
UFH plasma(n=5)86-99%83-99%80-100%
CV(%):Intra-Assay: CV<8%
Inter-Assay: CV<10%
ComponentQuantityStorage
ELISA Microplate (Dismountable)8×12 strips4°C for 6 months
Lyophilized Standard24°C/-20°C
Sample/Standard Dilution Buffer20ml4°C
Biotin-labeled Antibody(Concentrated)120ul4°C (Protect from light)
Antibody Dilution Buffer10ml4°C
HRP-Streptavidin Conjugate(SABC)120ul4°C (Protect from light)
SABC Dilution Buffer10ml4°C
TMB Substrate10ml4°C (Protect from light)
Stop Solution10ml4°C
Wash Buffer(25X)30ml4°C
Plate Sealer5-

Other materials and equipment required:

  • Microplate reader with 450 nm wavelength filter
  • Multichannel Pipette, Pipette, microcentrifuge tubes and disposable pipette tips
  • Incubator
  • Deionized or distilled water
  • Absorbent paper
  • Buffer resevoir
UniprotP05976
UniProt Protein Function:MYL1: Regulatory light chain of myosin. Does not bind calcium. 2 isoforms of the human protein are produced by alternative splicing.
UniProt Protein Details:Protein type:Motility/polarity/chemotaxis; Contractile

Chromosomal Location of Human Ortholog: 2q33-q34

Cellular Component: sarcomere; myofibril; muscle myosin complex; cytosol

Molecular Function:structural constituent of muscle; calcium ion binding

Biological Process: muscle contraction; muscle filament sliding; cardiac muscle contraction

NCBI Summary:Myosin is a hexameric ATPase cellular motor protein. It is composed of two heavy chains, two nonphosphorylatable alkali light chains, and two phosphorylatable regulatory light chains. This gene encodes a myosin alkali light chain expressed in fast skeletal muscle. Two transcript variants have been identified for this gene. [provided by RefSeq, Jul 2008]
UniProt Code:P05976
NCBI GenInfo Identifier:17986273
NCBI Gene ID:4632
NCBI Accession:NP_524144.1
UniProt Secondary Accession:P05976,P06741, Q6IBD5, B2R4N6, B2R4T6,
UniProt Related Accession:P05976
Molecular Weight:16,684 Da
NCBI Full Name:myosin light chain 1/3, skeletal muscle isoform isoform 1f
NCBI Synonym Full Names:myosin, light chain 1, alkali; skeletal, fast
NCBI Official Symbol:MYL1
NCBI Official Synonym Symbols:MLC1F; MLC3F
NCBI Protein Information:myosin light chain 1/3, skeletal muscle isoform; A1 catalytic; A2 catalytic; MLC1/MLC3; MLC1F/MLC3F; myosin light chain A1/A2; myosin light chain alkali 1/2; myosin, light polypeptide 1, alkali; skeletal, fast
UniProt Protein Name:Myosin light chain 1/3, skeletal muscle isoform
UniProt Synonym Protein Names:Myosin light chain alkali 1/2; Myosin light chain A1/A2
Protein Family:Myosin
UniProt Gene Name:MYL1
UniProt Entry Name:MYL1_HUMAN

*Note: Protocols are specific to each batch/lot. For the correct instructions please follow the protocol included in your kit.

Before adding to wells, equilibrate the SABC working solution and TMB substrate for at least 30 min at 37°C. When diluting samples and reagents, they must be mixed completely and evenly. It is recommended to plot a standard curve for each test.

StepProtocol
1.Set standard, test sample and control (zero) wells on the pre-coated plate respectively, and then, record their positions. It is recommended to measure each standard and sample in duplicate. Wash plate 2 times before adding standard, sample and control (zero) wells!
2.Aliquot 0.1ml standard solutions into the standard wells.
3.Add 0.1 ml of Sample / Standard dilution buffer into the control (zero) well.
4.Add 0.1 ml of properly diluted sample ( Human serum, plasma, tissue homogenates and other biological fluids.) into test sample wells.
5.Seal the plate with a cover and incubate at 37 °C for 90 min.
6.Remove the cover and discard the plate content, clap the plate on the absorbent filter papers or other absorbent material. Do NOT let the wells completely dry at any time. Wash plate X2.
7.Add 0.1 ml of Biotin- detection antibody working solution into the above wells (standard, test sample & zero wells). Add the solution at the bottom of each well without touching the side wall.
8.Seal the plate with a cover and incubate at 37°C for 60 min.
9.Remove the cover, and wash plate 3 times with Wash buffer. Let wash buffer rest in wells for 1 min between each wash.
10.Add 0.1 ml of SABC working solution into each well, cover the plate and incubate at 37°C for 30 min.
11.Remove the cover and wash plate 5 times with Wash buffer, and each time let the wash buffer stay in the wells for 1-2 min.
12.Add 90 µl of TMB substrate into each well, cover the plate and incubate at 37°C in dark within 10-20 min. (Note: This incubation time is for reference use only, the optimal time should be determined by end user.) And the shades of blue can be seen in the first 3-4 wells (with most concentrated standard solutions), the other wells show no obvious color.
13.Add 50 µl of Stop solution into each well and mix thoroughly. The color changes into yellow immediately.
14. Read the O.D. absorbance at 450 nm in a microplate reader immediately after adding the stop solution.

When carrying out an ELISA assay it is important to prepare your samples in order to achieve the best possible results. Below we have a list of procedures for the preparation of samples for different sample types.

Sample TypeProtocol
SerumIf using serum separator tubes, allow samples to clot for 30 minutes at room temperature. Centrifuge for 10 minutes at 1,000x g. Collect the serum fraction and assay promptly or aliquot and store the samples at -80°C. Avoid multiple freeze-thaw cycles.

If serum separator tubes are not being used, allow samples to clot overnight at 2-8°C. Centrifuge for 10 minutes at 1,000x g. Remove serum and assay promptly or aliquot and store the samples at -80°C. Avoid multiple freeze-thaw cycles.

PlasmaCollect plasma using EDTA or heparin as an anticoagulant. Centrifuge samples at 4°C for 15 mins at 1000 × g within 30 mins of collection. Collect the plasma fraction and assay promptly or aliquot and store the samples at -80°C. Avoid multiple freeze-thaw cycles. Note: Over haemolysed samples are not suitable for use with this kit.
Urine & Cerebrospinal FluidCollect the urine (mid-stream) in a sterile container, centrifuge for 20 mins at 2000-3000 rpm. Remove supernatant and assay immediately. If any precipitation is detected, repeat the centrifugation step. A similar protocol can be used for cerebrospinal fluid.
Cell culture supernatantCollect the cell culture media by pipette, followed by centrifugation at 4°C for 20 mins at 1500 rpm. Collect the clear supernatant and assay immediately.
Cell lysatesSolubilize cells in lysis buffer and allow to sit on ice for 30 minutes. Centrifuge tubes at 14,000 x g for 5 minutes to remove insoluble material. Aliquot the supernatant into a new tube and discard the remaining whole cell extract. Quantify total protein concentration using a total protein assay. Assay immediately or aliquot and store at ≤ -20 °C.
Tissue homogenatesThe preparation of tissue homogenates will vary depending upon tissue type. Rinse tissue with 1X PBS to remove excess blood & homogenize in 20ml of 1X PBS (including protease inhibitors) and store overnight at ≤ -20°C. Two freeze-thaw cycles are required to break the cell membranes. To further disrupt the cell membranes you can sonicate the samples. Centrifuge homogenates for 5 mins at 5000xg. Remove the supernatant and assay immediately or aliquot and store at -20°C or -80°C.
Tissue lysatesRinse tissue with PBS, cut into 1-2 mm pieces, and homogenize with a tissue homogenizer in PBS. Add an equal volume of RIPA buffer containing protease inhibitors and lyse tissues at room temperature for 30 minutes with gentle agitation. Centrifuge to remove debris. Quantify total protein concentration using a total protein assay. Assay immediately or aliquot and store at ≤ -20 °C.
Breast MilkCollect milk samples and centrifuge at 10,000 x g for 60 min at 4°C. Aliquot the supernatant and assay. For long term use, store samples at -80°C. Minimize freeze/thaw cycles.

Related Products