null

Human MMP1 ELISA Kit (HUFI00205)

SKU:
HUFI00205
Product Type:
ELISA Kit
Size:
96 Assays
Uniprot:
P03956
Sensitivity:
46.875pg/ml
Range:
78.125-5000pg/ml
ELISA Type:
Sandwich
Synonyms:
MMP-1, Matrix Metalloproteinase 1, MMP1, CLGmatrix metalloprotease 1, CLGN, Fibroblast collagenase, interstitial collagenase, Matrix metalloproteinase-1
Reactivity:
Human
img:cited-250-x-100-px-125-x-75-px-.png
$599
Frequently bought together:

Description

system_update_altDatasheetsystem_update_altMSDS

Human MMP1 ELISA Kit

The Human MMP1 ELISA Kit is specifically designed for the precise and reliable measurement of MMP1 levels in human biological samples including serum, plasma, and cell culture supernatants. This kit offers exceptional sensitivity and specificity, ensuring accurate and reproducible results for a variety of research applications.MMP1, also known as matrix metalloproteinase-1, is a critical enzyme involved in the breakdown of extracellular matrix components, playing a key role in tissue remodeling and cell migration. Elevated levels of MMP1 have been linked to various pathological conditions such as cancer, arthritis, and cardiovascular diseases, making it a valuable biomarker for studying disease progression and developing targeted therapies.

With its advanced technology and comprehensive instructions, the Human MMP1 ELISA Kit provides researchers with a powerful tool for investigating the role of MMP1 in disease pathogenesis and identifying potential therapeutic targets. Upgrade your research capabilities today with the Human MMP1 ELISA Kit from Assay Genie.

Product Name:Human MMP1 ELISA Kit
Product Code:HUFI00205
Size:96 Assays
Alias:MMP-1, Matrix Metalloproteinase 1, MMP1, CLGmatrix metalloprotease 1, CLGN, Fibroblast collagenase, interstitial collagenase, Matrix metalloproteinase-1
Detection method:Sandwich ELISA, Double Antibody
Application:This immunoassay kit allows for the in vitro quantitative determination of Human MMP-1 concentrations in serum plasma and other biological fluids.
Sensitivity:46.875pg/ml
Range:78.125-5000pg/ml
Storage:4°C for 6 months
Note:For Research Use Only
Recovery:Matrices listed below were spiked with certain level of Human MMP-1 and the recovery rates were calculated by comparing the measured value to the expected amount of Human MMP-1 in samples.
MatrixRecovery range(%)Average(%)
serum(n=5)86-10597
EDTA plasma(n=5)86-10393
UFH plasma(n=5)85-9994
Linearity:The linearity of the kit was assayed by testing samples spiked with appropriate concentration of Human MMP-1 and their serial dilutions. The results were demonstrated by the percentage of calculated concentration to the expected.
Sample1:21:41:8
serum(n=5)92-105%85-104%85-104%
EDTA plasma(n=5)82-94%84-101%85-96%
UFH plasma(n=5)87-100%80-100%81-94%
CV(%):Intra-Assay: CV<8%
Inter-Assay: CV<10%
ComponentQuantityStorage
ELISA Microplate (Dismountable)8×12 strips4°C for 6 months
Lyophilized Standard24°C/-20°C
Sample/Standard Dilution Buffer20ml4°C
Biotin-labeled Antibody(Concentrated)120ul4°C (Protect from light)
Antibody Dilution Buffer10ml4°C
HRP-Streptavidin Conjugate(SABC)120ul4°C (Protect from light)
SABC Dilution Buffer10ml4°C
TMB Substrate10ml4°C (Protect from light)
Stop Solution10ml4°C
Wash Buffer(25X)30ml4°C
Plate Sealer5-

Other materials and equipment required:

  • Microplate reader with 450 nm wavelength filter
  • Multichannel Pipette, Pipette, microcentrifuge tubes and disposable pipette tips
  • Incubator
  • Deionized or distilled water
  • Absorbent paper
  • Buffer resevoir
UniprotP03956
UniProt Protein Function:MMP1: Cleaves collagens of types I, II, and III at one site in the helical domain. Also cleaves collagens of types VII and X. In case of HIV infection, interacts and cleaves the secreted viral Tat protein, leading to a decrease in neuronal Tat's mediated neurotoxicity. Belongs to the peptidase M10A family.
UniProt Protein Details:Protein type:EC 3.4.24.7; Protease; Secreted; Motility/polarity/chemotaxis; Secreted, signal peptide

Chromosomal Location of Human Ortholog: 11q22.3

Cellular Component: extracellular region

Molecular Function:endopeptidase activity; metalloendopeptidase activity; serine-type endopeptidase activity

Biological Process: cellular protein metabolic process; collagen catabolic process; extracellular matrix disassembly; leukocyte migration; positive regulation of protein oligomerization; proteolysis

Disease: Epidermolysis Bullosa Dystrophica, Autosomal Recessive; Pulmonary Disease, Chronic Obstructive

NCBI Summary:This gene encodes a member of the peptidase M10 family of matrix metalloproteinases (MMPs). Proteins in this family are involved in the breakdown of extracellular matrix in normal physiological processes, such as embryonic development, reproduction, and tissue remodeling, as well as in disease processes, such as arthritis and metastasis. The encoded preproprotein is proteolytically processed to generate the mature protease. This secreted protease breaks down the interstitial collagens, including types I, II, and III. The gene is part of a cluster of MMP genes on chromosome 11. Mutations in this gene are associated with chronic obstructive pulmonary disease (COPD). Alternative splicing results in multiple transcript variants, at least one of which encodes an isoform that is proteolytically processed. [provided by RefSeq, Jan 2016]
UniProt Code:P03956
NCBI GenInfo Identifier:116852
NCBI Gene ID:4312
NCBI Accession:P03956.3
UniProt Secondary Accession:P03956,P08156,
UniProt Related Accession:P03956
Molecular Weight:54,007 Da
NCBI Full Name:Interstitial collagenase
NCBI Synonym Full Names:matrix metallopeptidase 1
NCBI Official Symbol:MMP1  
NCBI Official Synonym Symbols:CLG; CLGN  
NCBI Protein Information:interstitial collagenase
UniProt Protein Name:Interstitial collagenase
UniProt Synonym Protein Names:Fibroblast collagenase; Matrix metalloproteinase-1; MMP-1
Protein Family:Interstitial collagenase
UniProt Gene Name:MMP1  
UniProt Entry Name:MMP1_HUMAN

*Note: Protocols are specific to each batch/lot. For the correct instructions please follow the protocol included in your kit.

Before adding to wells, equilibrate the SABC working solution and TMB substrate for at least 30 min at 37°C. When diluting samples and reagents, they must be mixed completely and evenly. It is recommended to plot a standard curve for each test.

StepProtocol
1.Set standard, test sample and control (zero) wells on the pre-coated plate respectively, and then, record their positions. It is recommended to measure each standard and sample in duplicate. Wash plate 2 times before adding standard, sample and control (zero) wells!
2.Aliquot 0.1ml standard solutions into the standard wells.
3.Add 0.1 ml of Sample / Standard dilution buffer into the control (zero) well.
4.Add 0.1 ml of properly diluted sample ( Human serum, plasma, tissue homogenates and other biological fluids.) into test sample wells.
5.Seal the plate with a cover and incubate at 37 °C for 90 min.
6.Remove the cover and discard the plate content, clap the plate on the absorbent filter papers or other absorbent material. Do NOT let the wells completely dry at any time. Wash plate X2.
7.Add 0.1 ml of Biotin- detection antibody working solution into the above wells (standard, test sample & zero wells). Add the solution at the bottom of each well without touching the side wall.
8.Seal the plate with a cover and incubate at 37°C for 60 min.
9.Remove the cover, and wash plate 3 times with Wash buffer. Let wash buffer rest in wells for 1 min between each wash.
10.Add 0.1 ml of SABC working solution into each well, cover the plate and incubate at 37°C for 30 min.
11.Remove the cover and wash plate 5 times with Wash buffer, and each time let the wash buffer stay in the wells for 1-2 min.
12.Add 90 µl of TMB substrate into each well, cover the plate and incubate at 37°C in dark within 10-20 min. (Note: This incubation time is for reference use only, the optimal time should be determined by end user.) And the shades of blue can be seen in the first 3-4 wells (with most concentrated standard solutions), the other wells show no obvious color.
13.Add 50 µl of Stop solution into each well and mix thoroughly. The color changes into yellow immediately.
14. Read the O.D. absorbance at 450 nm in a microplate reader immediately after adding the stop solution.

When carrying out an ELISA assay it is important to prepare your samples in order to achieve the best possible results. Below we have a list of procedures for the preparation of samples for different sample types.

Sample TypeProtocol
SerumIf using serum separator tubes, allow samples to clot for 30 minutes at room temperature. Centrifuge for 10 minutes at 1,000x g. Collect the serum fraction and assay promptly or aliquot and store the samples at -80°C. Avoid multiple freeze-thaw cycles.

If serum separator tubes are not being used, allow samples to clot overnight at 2-8°C. Centrifuge for 10 minutes at 1,000x g. Remove serum and assay promptly or aliquot and store the samples at -80°C. Avoid multiple freeze-thaw cycles.

PlasmaCollect plasma using EDTA or heparin as an anticoagulant. Centrifuge samples at 4°C for 15 mins at 1000 × g within 30 mins of collection. Collect the plasma fraction and assay promptly or aliquot and store the samples at -80°C. Avoid multiple freeze-thaw cycles. Note: Over haemolysed samples are not suitable for use with this kit.
Urine & Cerebrospinal FluidCollect the urine (mid-stream) in a sterile container, centrifuge for 20 mins at 2000-3000 rpm. Remove supernatant and assay immediately. If any precipitation is detected, repeat the centrifugation step. A similar protocol can be used for cerebrospinal fluid.
Cell culture supernatantCollect the cell culture media by pipette, followed by centrifugation at 4°C for 20 mins at 1500 rpm. Collect the clear supernatant and assay immediately.
Cell lysatesSolubilize cells in lysis buffer and allow to sit on ice for 30 minutes. Centrifuge tubes at 14,000 x g for 5 minutes to remove insoluble material. Aliquot the supernatant into a new tube and discard the remaining whole cell extract. Quantify total protein concentration using a total protein assay. Assay immediately or aliquot and store at ≤ -20 °C.
Tissue homogenatesThe preparation of tissue homogenates will vary depending upon tissue type. Rinse tissue with 1X PBS to remove excess blood & homogenize in 20ml of 1X PBS (including protease inhibitors) and store overnight at ≤ -20°C. Two freeze-thaw cycles are required to break the cell membranes. To further disrupt the cell membranes you can sonicate the samples. Centrifuge homogenates for 5 mins at 5000xg. Remove the supernatant and assay immediately or aliquot and store at -20°C or -80°C.
Tissue lysatesRinse tissue with PBS, cut into 1-2 mm pieces, and homogenize with a tissue homogenizer in PBS. Add an equal volume of RIPA buffer containing protease inhibitors and lyse tissues at room temperature for 30 minutes with gentle agitation. Centrifuge to remove debris. Quantify total protein concentration using a total protein assay. Assay immediately or aliquot and store at ≤ -20 °C.
Breast MilkCollect milk samples and centrifuge at 10,000 x g for 60 min at 4°C. Aliquot the supernatant and assay. For long term use, store samples at -80°C. Minimize freeze/thaw cycles.
Gouarderes et al. Cold helium plasma jet does not stimulate collagen remodeling in a 3D human dermal substituteBioelectrochemistry (2021)View Citation

Citations

Gouarderes et al. Cold helium plasma jet does not stimulate collagen remodeling in a 3D human dermal substituteBioelectrochemistry (2021)View Citation

Related Products