Human Laminin subunit beta-2 / LAMB2 ELISA Kit
- SKU:
- HUFI01354
- Product Type:
- ELISA Kit
- Size:
- 96 Assays
- Uniprot:
- P55268
- Sensitivity:
- 0.375ng/ml
- Range:
- 0.625-40ng/ml
- ELISA Type:
- Sandwich
- Synonyms:
- LAMB2, Laminin subunit beta-2, Laminin-4 subunit beta, Laminin-3 subunit beta, Laminin-15 subunit beta, Laminin-14 subunit beta, S-laminin subunit beta, S-LAM beta, Laminin-9 subunit beta, Laminin-7 subunit beta, Laminin B1s chain, Laminin-11 subunit
- Reactivity:
- Human
- Research Area:
- Cell Biology
Description
Human Laminin subunit beta-2/LAMB2 ELISA Kit
The Human LAMB2 (Laminin Subunit Beta-2) ELISA Kit is specifically designed for the precise detection of LAMB2 levels in human serum, plasma, and cell culture supernatants. This advanced kit offers unparalleled sensitivity and specificity, ensuring accurate and consistent results for a variety of research purposes.LAMB2 is a key component of laminin, a protein involved in cell adhesion and migration, making it critical for various cellular processes. Dysregulation of LAMB2 has been linked to numerous diseases, including kidney disorders, muscular dystrophy, and certain types of cancer.
Thus, the ability to accurately measure LAMB2 levels is invaluable for understanding these conditions and potentially developing targeted therapies.In conclusion, the Human LAMB2 ELISA Kit is a valuable tool for researchers seeking to gain insights into the role of LAMB2 in health and disease. Its high performance and reliability make it an essential asset for any laboratory conducting studies related to laminin biology.
Product Name: | Human Laminin subunit beta-2 / LAMB2 ELISA Kit |
Product Code: | HUFI01354 |
Size: | 96 Assays |
Alias: | LAMB2, Laminin subunit beta-2, Laminin-4 subunit beta, Laminin-3 subunit beta, Laminin-15 subunit beta, Laminin-14 subunit beta, S-laminin subunit beta, S-LAM beta, Laminin-9 subunit beta, Laminin-7 subunit beta, Laminin B1s chain, Laminin-11 subunit beta |
Detection method: | Sandwich ELISA, Double Antibody |
Application: | This immunoassay kit allows for the in vitro quantitative determination of Human LAMB2 concentrations in serum plasma and other biological fluids. |
Sensitivity: | 0.375ng/ml |
Range: | 0.625-40ng/ml |
Storage: | 4°C for 6 months |
Note: | For Research Use Only |
Recovery: | Matrices listed below were spiked with certain level of Human LAMB2 and the recovery rates were calculated by comparing the measured value to the expected amount of Human LAMB2 in samples. | ||||||||||||||||
| |||||||||||||||||
Linearity: | The linearity of the kit was assayed by testing samples spiked with appropriate concentration of Human LAMB2 and their serial dilutions. The results were demonstrated by the percentage of calculated concentration to the expected. | ||||||||||||||||
| |||||||||||||||||
CV(%): | Intra-Assay: CV<8% Inter-Assay: CV<10% |
Component | Quantity | Storage |
ELISA Microplate (Dismountable) | 8×12 strips | 4°C for 6 months |
Lyophilized Standard | 2 | 4°C/-20°C |
Sample/Standard Dilution Buffer | 20ml | 4°C |
Biotin-labeled Antibody(Concentrated) | 120ul | 4°C (Protect from light) |
Antibody Dilution Buffer | 10ml | 4°C |
HRP-Streptavidin Conjugate(SABC) | 120ul | 4°C (Protect from light) |
SABC Dilution Buffer | 10ml | 4°C |
TMB Substrate | 10ml | 4°C (Protect from light) |
Stop Solution | 10ml | 4°C |
Wash Buffer(25X) | 30ml | 4°C |
Plate Sealer | 5 | - |
Other materials and equipment required:
- Microplate reader with 450 nm wavelength filter
- Multichannel Pipette, Pipette, microcentrifuge tubes and disposable pipette tips
- Incubator
- Deionized or distilled water
- Absorbent paper
- Buffer resevoir
Uniprot | P55268 |
UniProt Protein Function: | LAMB2: Binding to cells via a high affinity receptor, laminin is thought to mediate the attachment, migration and organization of cells into tissues during embryonic development by interacting with other extracellular matrix components. Defects in LAMB2 are the cause of Pierson syndrome (PIERSS); also known as microcoria-congenital nephrotic syndrome. Pierson syndrome is characterized by nephrotic syndrome with neonatal onset, diffuse mesangial sclerosis and eye abnormalities with microcoria as the leading clinical feature. Death usually occurs within the first weeks of life. Disease severity depends on the mutation type: nontruncating LAMB2 mutations may display variable phenotypes ranging from a milder variant of Pierson syndrome to isolated congenital nephrotic syndrome. Defects in LAMB2 are the cause of nephrotic syndrome type 5 with or without ocular abnormalities (NPHS5). NPHS5 is a renal disease characterized clinically by proteinuria, hypoalbuminemia, hyperlipidemia and edema. Kidney biopsies show non-specific histologic changes such as focal segmental glomerulosclerosis and diffuse mesangial proliferation. Some affected individuals have an inherited steroid-resistant form and progress to end-stage renal failure. NPHS5 is characterized by very early onset of progressive renal failure. A subset of patients may develop mild ocular anomalies, such as myopia, nystagmus, and strabismus. |
UniProt Protein Details: | Protein type:Extracellular matrix; Motility/polarity/chemotaxis; Secreted; Secreted, signal peptide Chromosomal Location of Human Ortholog: 3p21.31 Cellular Component: basal lamina; basement membrane; extracellular matrix; extracellular region; laminin-3 complex Biological Process: extracellular matrix organization and biogenesis Disease: Nephrotic Syndrome, Type 5, With Or Without Ocular Abnormalities; Pierson Syndrome |
NCBI Summary: | Laminins, a family of extracellular matrix glycoproteins, are the major noncollagenous constituent of basement membranes. They have been implicated in a wide variety of biological processes including cell adhesion, differentiation, migration, signaling, neurite outgrowth and metastasis. Laminins, composed of 3 non identical chains: laminin alpha, beta and gamma (formerly A, B1, and B2, respectively), form a cruciform structure consisting of 3 short arms, each formed by a different chain, and a long arm composed of all 3 chains. Each laminin chain is a multidomain protein encoded by a distinct gene. Several isoforms of each chain have been described. Different alpha, beta and gamma chain isomers combine to give rise to different heterotrimeric laminin isoforms which are designated by Arabic numerals in the order of their discovery, i.e. alpha1beta1gamma1 heterotrimer is laminin 1. The biological functions of the different chains and trimer molecules are largely unknown, but some of the chains have been shown to differ with respect to their tissue distribution, presumably reflecting diverse functions in vivo. This gene encodes the beta chain isoform laminin, beta 2. The beta 2 chain contains the 7 structural domains typical of beta chains of laminin, including the short alpha region. However, unlike beta 1 chain, beta 2 has a more restricted tissue distribution. It is enriched in the basement membrane of muscles at the neuromuscular junctions, kidney glomerulus and vascular smooth muscle. Transgenic mice in which the beta 2 chain gene was inactivated by homologous recombination, showed defects in the maturation of neuromuscular junctions and impairment of glomerular filtration. Alternative splicing involving a non consensus 5' splice site (gc) in the 5' UTR of this gene has been reported. It was suggested that inefficient splicing of this first intron, which does not change the protein sequence, results in a greater abundance of the unspliced form of the transcript than the spliced form. The full-length nature of the spliced transcript is not known. [provided by RefSeq, Aug 2011] |
UniProt Code: | P55268 |
NCBI GenInfo Identifier: | 156630892 |
NCBI Gene ID: | 3913 |
NCBI Accession: | P55268.2 |
UniProt Secondary Accession: | P55268,Q16321, |
UniProt Related Accession: | P55268 |
Molecular Weight: | 196kDa |
NCBI Full Name: | Laminin subunit beta-2 |
NCBI Synonym Full Names: | laminin subunit beta 2 |
NCBI Official Symbol: | LAMB2Â Â |
NCBI Official Synonym Symbols: | LAMS; NPHS5Â Â |
NCBI Protein Information: | laminin subunit beta-2 |
UniProt Protein Name: | Laminin subunit beta-2 |
UniProt Synonym Protein Names: | Laminin B1s chain; Laminin-11 subunit beta; Laminin-14 subunit beta; Laminin-15 subunit beta; Laminin-3 subunit beta; Laminin-4 subunit beta; Laminin-7 subunit beta; Laminin-9 subunit beta; S-laminin subunit beta; S-LAM beta |
Protein Family: | Laminin |
UniProt Gene Name: | LAMB2Â Â |
*Note: Protocols are specific to each batch/lot. For the correct instructions please follow the protocol included in your kit.
Before adding to wells, equilibrate the SABC working solution and TMB substrate for at least 30 min at 37°C. When diluting samples and reagents, they must be mixed completely and evenly. It is recommended to plot a standard curve for each test.
Step | Protocol |
1. | Set standard, test sample and control (zero) wells on the pre-coated plate respectively, and then, record their positions. It is recommended to measure each standard and sample in duplicate. Wash plate 2 times before adding standard, sample and control (zero) wells! |
2. | Aliquot 0.1ml standard solutions into the standard wells. |
3. | Add 0.1 ml of Sample / Standard dilution buffer into the control (zero) well. |
4. | Add 0.1 ml of properly diluted sample ( Human serum, plasma, tissue homogenates and other biological fluids.) into test sample wells. |
5. | Seal the plate with a cover and incubate at 37 °C for 90 min. |
6. | Remove the cover and discard the plate content, clap the plate on the absorbent filter papers or other absorbent material. Do NOT let the wells completely dry at any time. Wash plate X2. |
7. | Add 0.1 ml of Biotin- detection antibody working solution into the above wells (standard, test sample & zero wells). Add the solution at the bottom of each well without touching the side wall. |
8. | Seal the plate with a cover and incubate at 37°C for 60 min. |
9. | Remove the cover, and wash plate 3 times with Wash buffer. Let wash buffer rest in wells for 1 min between each wash. |
10. | Add 0.1 ml of SABC working solution into each well, cover the plate and incubate at 37°C for 30 min. |
11. | Remove the cover and wash plate 5 times with Wash buffer, and each time let the wash buffer stay in the wells for 1-2 min. |
12. | Add 90 µl of TMB substrate into each well, cover the plate and incubate at 37°C in dark within 10-20 min. (Note: This incubation time is for reference use only, the optimal time should be determined by end user.) And the shades of blue can be seen in the first 3-4 wells (with most concentrated standard solutions), the other wells show no obvious color. |
13. | Add 50 µl of Stop solution into each well and mix thoroughly. The color changes into yellow immediately. |
14. | Read the O.D. absorbance at 450 nm in a microplate reader immediately after adding the stop solution. |
When carrying out an ELISA assay it is important to prepare your samples in order to achieve the best possible results. Below we have a list of procedures for the preparation of samples for different sample types.
Sample Type | Protocol |
Serum | If using serum separator tubes, allow samples to clot for 30 minutes at room temperature. Centrifuge for 10 minutes at 1,000x g. Collect the serum fraction and assay promptly or aliquot and store the samples at -80°C. Avoid multiple freeze-thaw cycles. If serum separator tubes are not being used, allow samples to clot overnight at 2-8°C. Centrifuge for 10 minutes at 1,000x g. Remove serum and assay promptly or aliquot and store the samples at -80°C. Avoid multiple freeze-thaw cycles. |
Plasma | Collect plasma using EDTA or heparin as an anticoagulant. Centrifuge samples at 4°C for 15 mins at 1000 × g within 30 mins of collection. Collect the plasma fraction and assay promptly or aliquot and store the samples at -80°C. Avoid multiple freeze-thaw cycles. Note: Over haemolysed samples are not suitable for use with this kit. |
Urine & Cerebrospinal Fluid | Collect the urine (mid-stream) in a sterile container, centrifuge for 20 mins at 2000-3000 rpm. Remove supernatant and assay immediately. If any precipitation is detected, repeat the centrifugation step. A similar protocol can be used for cerebrospinal fluid. |
Cell culture supernatant | Collect the cell culture media by pipette, followed by centrifugation at 4°C for 20 mins at 1500 rpm. Collect the clear supernatant and assay immediately. |
Cell lysates | Solubilize cells in lysis buffer and allow to sit on ice for 30 minutes. Centrifuge tubes at 14,000 x g for 5 minutes to remove insoluble material. Aliquot the supernatant into a new tube and discard the remaining whole cell extract. Quantify total protein concentration using a total protein assay. Assay immediately or aliquot and store at ≤ -20 °C. |
Tissue homogenates | The preparation of tissue homogenates will vary depending upon tissue type. Rinse tissue with 1X PBS to remove excess blood & homogenize in 20ml of 1X PBS (including protease inhibitors) and store overnight at ≤ -20°C. Two freeze-thaw cycles are required to break the cell membranes. To further disrupt the cell membranes you can sonicate the samples. Centrifuge homogenates for 5 mins at 5000xg. Remove the supernatant and assay immediately or aliquot and store at -20°C or -80°C. |
Tissue lysates | Rinse tissue with PBS, cut into 1-2 mm pieces, and homogenize with a tissue homogenizer in PBS. Add an equal volume of RIPA buffer containing protease inhibitors and lyse tissues at room temperature for 30 minutes with gentle agitation. Centrifuge to remove debris. Quantify total protein concentration using a total protein assay. Assay immediately or aliquot and store at ≤ -20 °C. |
Breast Milk | Collect milk samples and centrifuge at 10,000 x g for 60 min at 4°C. Aliquot the supernatant and assay. For long term use, store samples at -80°C. Minimize freeze/thaw cycles. |