Human IRF6 (Interferon regulatory factor 6) ELISA Kit (HUFI07764)
- SKU:
- HUFI07764
- Product Type:
- ELISA Kit
- Size:
- 96 Assays
- Uniprot:
- O14896
- Sensitivity:
- 0.094ng/ml
- Range:
- 0.156-10ng/ml
- ELISA Type:
- Sandwich
- Synonyms:
- interferon regulatory factor 6, IRF 6, IRF6, LPS, OFC6, PIT, PPS, VWS
- Reactivity:
- Human
Frequently bought together:
Description
Human IRF6 (Interferon regulatory factor 6) ELISA Kit (HUFI07764)
The Human IRF6 (Interferon Regulatory Factor 6) ELISA Kit is a specialized assay designed for the precise measurement of IRF6 levels in human samples including serum, plasma, and cell culture supernatants. With its exceptional sensitivity and specificity, this kit offers dependable and consistent results, making it an invaluable tool for a wide variety of research applications.IRF6 is a key transcription factor that plays a crucial role in regulating the immune response and cellular differentiation.
Dysregulation of IRF6 has been linked to various diseases such as inflammatory disorders, autoimmune diseases, and cancer. By accurately quantifying IRF6 levels, researchers can gain valuable insights into the mechanisms underlying these conditions and explore potential therapeutic interventions.Discover the power of precision with the Human IRF6 ELISA Kit and unlock new possibilities in your research endeavors.
| Product Name: | Human IRF6 (Interferon regulatory factor 6) ELISA Kit |
| Product Code: | HUFI07764 |
| Size: | 96 Assays |
| Alias: | interferon regulatory factor 6 ELISA Kit, IRF 6 ELISA Kit, IRF6 ELISA Kit, LPS ELISA Kit, OFC6 ELISA Kit, PIT ELISA Kit, PPS ELISA Kit, VWS ELISA Kit |
| Detection method: | Sandwich ELISA, Double Antibody |
| Application: | This immunoassay kit allows for the in vitro quantitative determination of Human IRF6 (Interferon regulatory factor 6) concentrations in serum plasma and other biological fluids. |
| Sensitivity: | < 0.094ng/ml |
| Range: | 0.156-10ng/ml |
| Storage: | 4°C for 6 months |
| Note: | For Research Use Only |
| Recovery: | Matrices listed below were spiked with certain level of Human IRF6 (Interferon regulatory factor 6) and the recovery rates were calculated by comparing the measured value to the expected amount of Human IRF6 (Interferon regulatory factor 6) in samples. Enquire for more information. |
| Linearity: | The linearity of the kit was assayed by testing samples spiked with appropriate concentration of Human IRF6 (Interferon regulatory factor 6) and their serial dilutions. The results were demonstrated by the percentage of calculated concentration to the expected. Enquire for more information. |
| CV(%): | Intra-Assay: CV<8% Inter-Assay: CV<10% |
| Component | Quantity | Storage |
| ELISA Microplate (Dismountable) | 8×12 strips | 4°C for 6 months |
| Lyophilized Standard | 2 | 4°C/-20°C |
| Sample/Standard Dilution Buffer | 20ml | 4°C |
| Biotin-labeled Antibody(Concentrated) | 120ul | 4°C (Protect from light) |
| Antibody Dilution Buffer | 10ml | 4°C |
| HRP-Streptavidin Conjugate(SABC) | 120ul | 4°C (Protect from light) |
| SABC Dilution Buffer | 10ml | 4°C |
| TMB Substrate | 10ml | 4°C (Protect from light) |
| Stop Solution | 10ml | 4°C |
| Wash Buffer(25X) | 30ml | 4°C |
| Plate Sealer | 5 | - |
Other materials and equipment required:
- Microplate reader with 450 nm wavelength filter
- Multichannel Pipette, Pipette, microcentrifuge tubes and disposable pipette tips
- Incubator
- Deionized or distilled water
- Absorbent paper
- Buffer resevoir
| UniProt Protein Function: | IRF6: Probable DNA-binding transcriptional activator. Key determinant of the keratinocyte proliferation-differentiation switch involved in appropriate epidermal development. Plays a role in regulating mammary epithelial cell proliferation. May regulate WDR65 transcription. Interacts with SERPINB5. Expressed in normal mammary epithelial cells. Expression is reduced or absent in breast carcinomas. Belongs to the IRF family. |
| UniProt Protein Details: | Protein type:Transcription factor; DNA-binding Chromosomal Location of Human Ortholog: 1q32.3-q41 Cellular Component: cytoplasm; cytosol; nucleus Molecular Function:protein binding; DNA binding; transcription factor activity Biological Process: keratinocyte differentiation; negative regulation of cell proliferation; transcription, DNA-dependent; positive regulation of transcription, DNA-dependent; cytokine and chemokine mediated signaling pathway; keratinocyte proliferation; cell cycle arrest; cell development Disease: Orofacial Cleft 6, Susceptibility To; Popliteal Pterygium Syndrome; Van Der Woude Syndrome 1 |
| NCBI Summary: | This gene encodes a member of the interferon regulatory transcription factor (IRF) family. Family members share a highly-conserved N-terminal helix-turn-helix DNA-binding domain and a less conserved C-terminal protein-binding domain. The encoded protein may be a transcriptional activator. Mutations in this gene can cause van der Woude syndrome and popliteal pterygium syndrome. Mutations in this gene are also associated with non-syndromic orofacial cleft type 6. Alternate splicing results in multiple transcript variants.[provided by RefSeq, May 2011] |
| UniProt Code: | O14896 |
| NCBI GenInfo Identifier: | 3122293 |
| NCBI Gene ID: | 3664 |
| NCBI Accession: | O14896.1 |
| UniProt Secondary Accession: | O14896,B4DLE2, D3DT90, F5GWX8, G0ZTL0, |
| UniProt Related Accession: | O14896 |
| Molecular Weight: | 467 |
| NCBI Full Name: | Interferon regulatory factor 6 |
| NCBI Synonym Full Names: | interferon regulatory factor 6 |
| NCBI Official Symbol: | IRF6 |
| NCBI Official Synonym Symbols: | LPS; PIT; PPS; VWS; OFC6; PPS1; VWS1 |
| NCBI Protein Information: | interferon regulatory factor 6 |
| UniProt Protein Name: | Interferon regulatory factor 6 |
| Protein Family: | Interferon regulatory factor |
| UniProt Gene Name: | IRF6 |
| UniProt Entry Name: | IRF6_HUMAN |
*Note: Protocols are specific to each batch/lot. For the correct instructions please follow the protocol included in your kit.
Before adding to wells, equilibrate the SABC working solution and TMB substrate for at least 30 min at 37 °C. When diluting samples and reagents, they must be mixed completely and evenly. It is recommended to plot a standard curve for each test.
| Step | Protocol |
| 1. | Set standard, test sample and control (zero) wells on the pre-coated plate respectively, and then, record their positions. It is recommended to measure each standard and sample in duplicate. Wash plate 2 times before adding standard, sample and control (zero) wells! |
| 2. | Aliquot 0.1ml standard solutions into the standard wells. |
| 3. | Add 0.1 ml of Sample / Standard dilution buffer into the control (zero) well. |
| 4. | Add 0.1 ml of properly diluted sample ( Human serum, plasma, tissue homogenates and other biological fluids.) into test sample wells. |
| 5. | Seal the plate with a cover and incubate at 37 °C for 90 min. |
| 6. | Remove the cover and discard the plate content, clap the plate on the absorbent filter papers or other absorbent material. Do NOT let the wells completely dry at any time. Wash plate X2. |
| 7. | Add 0.1 ml of Biotin- detection antibody working solution into the above wells (standard, test sample & zero wells). Add the solution at the bottom of each well without touching the side wall. |
| 8. | Seal the plate with a cover and incubate at 37 °C for 60 min. |
| 9. | Remove the cover, and wash plate 3 times with Wash buffer. Let wash buffer rest in wells for 1 min between each wash. |
| 10. | Add 0.1 ml of SABC working solution into each well, cover the plate and incubate at 37 °C for 30 min. |
| 11. | Remove the cover and wash plate 5 times with Wash buffer, and each time let the wash buffer stay in the wells for 1-2 min. |
| 12. | Add 90 µL of TMB substrate into each well, cover the plate and incubate at 37 °C in dark within 10-20 min. (Note: This incubation time is for reference use only, the optimal time should be determined by end user.) And the shades of blue can be seen in the first 3-4 wells (with most concentrated standard solutions), the other wells show no obvious color. |
| 13. | Add 50 µL of Stop solution into each well and mix thoroughly. The color changes into yellow immediately. |
| 14. | Read the O.D. absorbance at 450 nm in a microplate reader immediately after adding the stop solution. |
When carrying out an ELISA assay it is important to prepare your samples in order to achieve the best possible results. Below we have a list of procedures for the preparation of samples for different sample types.
| Sample Type | Protocol |
| Serum | If using serum separator tubes, allow samples to clot for 30 minutes at room temperature. Centrifuge for 10 minutes at 1,000x g. Collect the serum fraction and assay promptly or aliquot and store the samples at -80°C. Avoid multiple freeze-thaw cycles. If serum separator tubes are not being used, allow samples to clot overnight at 2-8°C. Centrifuge for 10 minutes at 1,000x g. Remove serum and assay promptly or aliquot and store the samples at -80°C. Avoid multiple freeze-thaw cycles. |
| Plasma | Collect plasma using EDTA or heparin as an anticoagulant. Centrifuge samples at 4°C for 15 mins at 1000 × g within 30 mins of collection. Collect the plasma fraction and assay promptly or aliquot and store the samples at -80°C. Avoid multiple freeze-thaw cycles. Note: Over haemolysed samples are not suitable for use with this kit. |
| Urine & Cerebrospinal Fluid | Collect the urine (mid-stream) in a sterile container, centrifuge for 20 mins at 2000-3000 rpm. Remove supernatant and assay immediately. If any precipitation is detected, repeat the centrifugation step. A similar protocol can be used for cerebrospinal fluid. |
| Cell culture supernatant | Collect the cell culture media by pipette, followed by centrifugation at 4°C for 20 mins at 1500 rpm. Collect the clear supernatant and assay immediately. |
| Cell lysates | Solubilize cells in lysis buffer and allow to sit on ice for 30 minutes. Centrifuge tubes at 14,000 x g for 5 minutes to remove insoluble material. Aliquot the supernatant into a new tube and discard the remaining whole cell extract. Quantify total protein concentration using a total protein assay. Assay immediately or aliquot and store at ≤ -20 °C. |
| Tissue homogenates | The preparation of tissue homogenates will vary depending upon tissue type. Rinse tissue with 1X PBS to remove excess blood & homogenize in 20ml of 1X PBS (including protease inhibitors) and store overnight at ≤ -20°C. Two freeze-thaw cycles are required to break the cell membranes. To further disrupt the cell membranes you can sonicate the samples. Centrifuge homogenates for 5 mins at 5000xg. Remove the supernatant and assay immediately or aliquot and store at -20°C or -80°C. |
| Tissue lysates | Rinse tissue with PBS, cut into 1-2 mm pieces, and homogenize with a tissue homogenizer in PBS. Add an equal volume of RIPA buffer containing protease inhibitors and lyse tissues at room temperature for 30 minutes with gentle agitation. Centrifuge to remove debris. Quantify total protein concentration using a total protein assay. Assay immediately or aliquot and store at ≤ -20 °C. |
| Breast Milk | Collect milk samples and centrifuge at 10,000 x g for 60 min at 4°C. Aliquot the supernatant and assay. For long term use, store samples at -80°C. Minimize freeze/thaw cycles. |
Related Products
Human Interferon Regulatory Factor 5 (IRF5) ELISA Kit Regulatory Factor 5 (IRF5) ELISA Kit
$719
Human Interferon Regulatory Factor 9 (IRF9) ELISA Kit
$719
Human Interferon regulatory factor 5 (IRF5) ELISA Kit (HUEB1876)
$779
Human IRF7 (Interferon regulatory factor 7) ELISA Kit (HUFI03435)
$719
Human Interferon regulatory factor 8 (IRF8) ELISA Kit (HUEB1941)
$779
Human Interferon regulatory factor 3 (IRF3) ELISA Kit (HUEB1604)
$779
Human Interferon regulatory factor 1 (IRF1) ELISA Kit (HUEB1783)
$779
Rat Interferon Regulatory Factor 4 (IRF4) ELISA Kit
$779