null

Human Interferon alpha-inducible protein 6 / IFI6 ELISA Kit (HUFI01005)

SKU:
HUFI01005
Product Type:
ELISA Kit
Size:
96 Assays
Uniprot:
P09912
Sensitivity:
18.75pg/ml
Range:
31.25-2000pg/ml
ELISA Type:
Sandwich
Synonyms:
IFI6, Interferon alpha-inducible protein 6, Interferon-induced protein 6-16, Ifi-6-16, G1P3, FAM14C, IFI-6-16, 6-16, IFI616
Reactivity:
Human
Research Area:
Immunology
$719
Frequently bought together:

Description

system_update_altDatasheetsystem_update_altMSDS

Human Interferon alpha-inducible protein 6/IFI6 ELISA Kit

The Human Interferon Alpha-Inducible Protein 6 (IFI6) ELISA Kit is designed for the accurate detection of IFI6 levels in human serum, plasma, and cell culture supernatants. This kit features high sensitivity and specificity, ensuring reliable and reproducible results for researchers studying the role of IFI6 in immune responses and disease pathogenesis.IFI6 is a key protein induced by interferon alpha, playing a crucial role in the human immune system's response to viral infections and other inflammatory stimuli.

Its dysregulation has been linked to autoimmune diseases, viral infections, and cancer, making it a valuable biomarker for investigating these conditions and potential therapeutic targets.With its user-friendly protocol and robust performance, the Human IFI6 ELISA Kit is an essential tool for researchers looking to study the role of this important protein in various disease processes and immune responses. Get your hands on this kit today and unlock the mysteries of IFI6 biology.

Product Name:Human Interferon alpha-inducible protein 6 / IFI6 ELISA Kit
Product Code:HUFI01005
Size:96 Assays
Alias:IFI6, Interferon alpha-inducible protein 6, Interferon-induced protein 6-16, Ifi-6-16, G1P3, FAM14C, IFI-6-16, 6-16, IFI616
Detection method:Sandwich ELISA, Double Antibody
Application:This immunoassay kit allows for the in vitro quantitative determination of Human IFI6 concentrations in serum plasma and other biological fluids.
Sensitivity:18.75pg/ml
Range:31.25-2000pg/ml
Storage:4°C for 6 months
Note:For Research Use Only
Recovery:Matrices listed below were spiked with certain level of Human IFI6 and the recovery rates were calculated by comparing the measured value to the expected amount of Human IFI6 in samples.
MatrixRecovery range(%)Average(%)
serum(n=5)85-10296
EDTA plasma(n=5)89-10093
UFH plasma(n=5)92-10297
Linearity:The linearity of the kit was assayed by testing samples spiked with appropriate concentration of Human IFI6 and their serial dilutions. The results were demonstrated by the percentage of calculated concentration to the expected.
Sample1:21:41:8
serum(n=5)94-101%95-101%91-104%
EDTA plasma(n=5)84-101%85-101%85-100%
UFH plasma(n=5)82-97%80-87%81-99%
CV(%):Intra-Assay: CV<8%
Inter-Assay: CV<10%
ComponentQuantityStorage
ELISA Microplate (Dismountable)8×12 strips4°C for 6 months
Lyophilized Standard24°C/-20°C
Sample/Standard Dilution Buffer20ml4°C
Biotin-labeled Antibody(Concentrated)120ul4°C (Protect from light)
Antibody Dilution Buffer10ml4°C
HRP-Streptavidin Conjugate(SABC)120ul4°C (Protect from light)
SABC Dilution Buffer10ml4°C
TMB Substrate10ml4°C (Protect from light)
Stop Solution10ml4°C
Wash Buffer(25X)30ml4°C
Plate Sealer5-

Other materials and equipment required:

  • Microplate reader with 450 nm wavelength filter
  • Multichannel Pipette, Pipette, microcentrifuge tubes and disposable pipette tips
  • Incubator
  • Deionized or distilled water
  • Absorbent paper
  • Buffer resevoir
UniprotP09912
UniProt Protein Function:IFI6: first identified as one of the many genes induced by interferon. The encoded protein may play a critical role in the regulation of apoptosis. A minisatellite that consists of 26 repeats of a 12 nucleotide repeating element resembling the mammalian splice donor consensus sequence begins near the end of the second exon. Alternatively spliced transcript variants that encode different isoforms by using the two downstream repeat units as splice donor sites have been described. [provided by RefSeq, Jul 2008]
UniProt Protein Details:Protein type:Membrane protein, multi-pass; Apoptosis; Membrane protein, integral

Chromosomal Location of Human Ortholog: 1p35

Cellular Component: mitochondrion; plasma membrane; integral to membrane

Molecular Function:protein binding

Biological Process: release of cytochrome c from mitochondria; cytokine and chemokine mediated signaling pathway; immune response; negative regulation of caspase activity; negative regulation of mitochondrial depolarization

NCBI Summary:This gene was first identified as one of the many genes induced by interferon. The encoded protein may play a critical role in the regulation of apoptosis. A minisatellite that consists of 26 repeats of a 12 nucleotide repeating element resembling the mammalian splice donor consensus sequence begins near the end of the second exon. Alternatively spliced transcript variants that encode different isoforms by using the two downstream repeat units as splice donor sites have been described. [provided by RefSeq, Jul 2008]
UniProt Code:P09912
NCBI GenInfo Identifier:20178294
NCBI Gene ID:2537
NCBI Accession:P09912.2
UniProt Secondary Accession:P09912,Q13141, Q13142, Q5VVR2, Q5VVR3, Q6IE95, Q969M8
UniProt Related Accession:P09912
Molecular Weight:130
NCBI Full Name:Interferon alpha-inducible protein 6
NCBI Synonym Full Names:interferon, alpha-inducible protein 6
NCBI Official Symbol:IFI6
NCBI Official Synonym Symbols:6-16; G1P3; FAM14C; IFI616; IFI-6-16
NCBI Protein Information:interferon alpha-inducible protein 6; interferon-induced protein 6-16; interferon, alpha-inducible protein clone IFI-6-16
UniProt Protein Name:Interferon alpha-inducible protein 6
UniProt Synonym Protein Names:Interferon-induced protein 6-16; Ifi-6-16
Protein Family:Interferon alpha-inducible protein
UniProt Gene Name:IFI6
UniProt Entry Name:IFI6_HUMAN

*Note: Protocols are specific to each batch/lot. For the correct instructions please follow the protocol included in your kit.

Before adding to wells, equilibrate the SABC working solution and TMB substrate for at least 30 min at 37°C. When diluting samples and reagents, they must be mixed completely and evenly. It is recommended to plot a standard curve for each test.

StepProtocol
1.Set standard, test sample and control (zero) wells on the pre-coated plate respectively, and then, record their positions. It is recommended to measure each standard and sample in duplicate. Wash plate 2 times before adding standard, sample and control (zero) wells!
2.Aliquot 0.1ml standard solutions into the standard wells.
3.Add 0.1 ml of Sample / Standard dilution buffer into the control (zero) well.
4.Add 0.1 ml of properly diluted sample ( Human serum, plasma, tissue homogenates and other biological fluids.) into test sample wells.
5.Seal the plate with a cover and incubate at 37 °C for 90 min.
6.Remove the cover and discard the plate content, clap the plate on the absorbent filter papers or other absorbent material. Do NOT let the wells completely dry at any time. Wash plate X2.
7.Add 0.1 ml of Biotin- detection antibody working solution into the above wells (standard, test sample & zero wells). Add the solution at the bottom of each well without touching the side wall.
8.Seal the plate with a cover and incubate at 37°C for 60 min.
9.Remove the cover, and wash plate 3 times with Wash buffer. Let wash buffer rest in wells for 1 min between each wash.
10.Add 0.1 ml of SABC working solution into each well, cover the plate and incubate at 37°C for 30 min.
11.Remove the cover and wash plate 5 times with Wash buffer, and each time let the wash buffer stay in the wells for 1-2 min.
12.Add 90 µl of TMB substrate into each well, cover the plate and incubate at 37°C in dark within 10-20 min. (Note: This incubation time is for reference use only, the optimal time should be determined by end user.) And the shades of blue can be seen in the first 3-4 wells (with most concentrated standard solutions), the other wells show no obvious color.
13.Add 50 µl of Stop solution into each well and mix thoroughly. The color changes into yellow immediately.
14. Read the O.D. absorbance at 450 nm in a microplate reader immediately after adding the stop solution.

When carrying out an ELISA assay it is important to prepare your samples in order to achieve the best possible results. Below we have a list of procedures for the preparation of samples for different sample types.

Sample TypeProtocol
SerumIf using serum separator tubes, allow samples to clot for 30 minutes at room temperature. Centrifuge for 10 minutes at 1,000x g. Collect the serum fraction and assay promptly or aliquot and store the samples at -80°C. Avoid multiple freeze-thaw cycles.

If serum separator tubes are not being used, allow samples to clot overnight at 2-8°C. Centrifuge for 10 minutes at 1,000x g. Remove serum and assay promptly or aliquot and store the samples at -80°C. Avoid multiple freeze-thaw cycles.

PlasmaCollect plasma using EDTA or heparin as an anticoagulant. Centrifuge samples at 4°C for 15 mins at 1000 × g within 30 mins of collection. Collect the plasma fraction and assay promptly or aliquot and store the samples at -80°C. Avoid multiple freeze-thaw cycles. Note: Over haemolysed samples are not suitable for use with this kit.
Urine & Cerebrospinal FluidCollect the urine (mid-stream) in a sterile container, centrifuge for 20 mins at 2000-3000 rpm. Remove supernatant and assay immediately. If any precipitation is detected, repeat the centrifugation step. A similar protocol can be used for cerebrospinal fluid.
Cell culture supernatantCollect the cell culture media by pipette, followed by centrifugation at 4°C for 20 mins at 1500 rpm. Collect the clear supernatant and assay immediately.
Cell lysatesSolubilize cells in lysis buffer and allow to sit on ice for 30 minutes. Centrifuge tubes at 14,000 x g for 5 minutes to remove insoluble material. Aliquot the supernatant into a new tube and discard the remaining whole cell extract. Quantify total protein concentration using a total protein assay. Assay immediately or aliquot and store at ≤ -20 °C.
Tissue homogenatesThe preparation of tissue homogenates will vary depending upon tissue type. Rinse tissue with 1X PBS to remove excess blood & homogenize in 20ml of 1X PBS (including protease inhibitors) and store overnight at ≤ -20°C. Two freeze-thaw cycles are required to break the cell membranes. To further disrupt the cell membranes you can sonicate the samples. Centrifuge homogenates for 5 mins at 5000xg. Remove the supernatant and assay immediately or aliquot and store at -20°C or -80°C.
Tissue lysatesRinse tissue with PBS, cut into 1-2 mm pieces, and homogenize with a tissue homogenizer in PBS. Add an equal volume of RIPA buffer containing protease inhibitors and lyse tissues at room temperature for 30 minutes with gentle agitation. Centrifuge to remove debris. Quantify total protein concentration using a total protein assay. Assay immediately or aliquot and store at ≤ -20 °C.
Breast MilkCollect milk samples and centrifuge at 10,000 x g for 60 min at 4°C. Aliquot the supernatant and assay. For long term use, store samples at -80°C. Minimize freeze/thaw cycles.

Related Products