Human ILK ELISA Kit (HUEB1801)- High Sensitivity

Product Name:	Human Integrin-linked protein kinase (ILK) ELISA Kit
SKU:	HUEB1801
Size:	96T
Target:	Human Integrin-linked protein kinase (ILK)
Synonyms:	59 kDa serine/threonine-protein kinase, ILK-1, ILK-2, p59ILK, ILK1, ILK2
Assay Type:	Sandwich
Detection Method:	ELISA
Reactivity:	Human
Detection Range:	0.78-50ng/mL
Sensitivity:	0.401ng/mL

Intra CV:

6.8%

Inter CV:

9.2%

Linearity:

Sample	1:2	1:4	1:8	1:16
Serum(N=5)	92-102%	89-99%	102-112%	97-107%
EDTA Plasma(N=5)	99-108%	90-98%	88-100%	98-108%
Heparin Plasma(N=5)	113-123%	87-99%	80-90%	93-102%

Recovery:

Sample Type	Average(%)	Recovery Range(%)
Serum	99	93-105
Plasma	101	95-107

Function:

Receptor-proximal protein kinase regulating integrin-mediated signal transduction (PubMed:8538749, PubMed:9736715). May act as a mediator of inside-out integrin signaling. Focal adhesion protein part of the complex ILK-PINCH. This complex is considered to be one of the convergence points of integrin- and growth factor-signaling pathway. Could be implicated in mediating cell architecture, adhesion to integrin substrates and anchorage-dependent growth in epithelial cells. Phosphorylates beta-1 and beta-3 integrin subunit on serine and threonine residues, but also AKT1 and GSK3B (PubMed:8538749, PubMed:9736715).

Uniprot:	Q13418
Sample Type:	Serum, plasma, tissue homogenates, cell culture supernates and other biological fluids
Specificity:	Natural and recombinant human Integrin-linked protein kinase
Sub Unit:	Interacts with FERMT2 (By similarity). Interacts with the cytoplasmic domain of ITGB1. Could also interact with integrin ITGB2, ITGB3 and/or ITGB5. Interacts (via ANK repeats) with LIMS1 and LIMS2. Interacts with PARVA and PARVB; these compete for the same binding site. Interacts probably also with TGFB1I1. Interacts (via ANK repeats) with EPHA1 (via SAM domain); stimulated by EFNA1 but independent of the kinase activity of EPHA1. Interacts with LIMD2; leading to activate the protein kinase activity (PubMed:24590809).
Research Area:	Cancer
Subcellular Location:	Cell junction Focal adhesion Cell membrane Peripheral membrane protein Cytoplasmic side Cell projection Lamellipodium Cytoplasm Myofibril Sarcomere
Storage:	Please see kit components below for exact storage details
Note:	For research use only

UniProt Protein Function:	ILK: a tyrosine kinase-like kinase of the MLK family. Couples integrins and growth factors to downstream pathways involved in cell survival, cell cycle control, cell-cell adhesion and cell motility. Functions as a scaffold bridging the extra-cellular matrix and growth factor receptors to the actin cytoskeleton through interactions with the ILK-PINCH complex. This complex, which includes integrin, PINCH (which links ILK to receptor tyrosine kinases via Nck2), PARVA and affixin, is considered to be one of the convergence points of integrin- and growth factor-signaling pathways. May be implicated in mediating cell architecture, adhesion to integrin substrates and anchorage-dependent growth in epithelial cells. Stimulated downstream of PI3 kinase. Increased expression is correlated with progression of several tumor types, including breast, prostate, and colon carcinomas. Overexpression drives anchorage-independent growth and faster cell cycle.
UniProt Protein Details:	Protein type:Protein kinase, Ser/Thr (non-receptor); EC 2.7.11.1; Kinase, protein; Protein kinase, TKL; TKL group; MLK family; ILK subfamily Chromosomal Location of Human Ortholog: 11p15.4 Cellular Component: cell junction; cytoplasm; cytosol; focal adhesion; membrane; nucleoplasm Molecular Function:protein binding; protein kinase binding; protein serine/threonine kinase activity Biological Process: cell-matrix adhesion; integrin-mediated signaling pathway; positive regulation of phosphorylation; positive regulation of transcription, DNA-dependent; protein amino acid phosphorylation
NCBI Summary:	This gene encodes a protein with a kinase-like domain and four ankyrin-like repeats. The encoded protein associates at the cell membrane with the cytoplasmic domain of beta integrins, where it regulates integrin-mediated signal transduction. Activity of this protein is important in the epithelial to mesenchymal transition, and over-expression of this gene is implicated in tumor growth and metastasis. Alternative splicing results in multiple transcript variants. [provided by RefSeq, Jun 2013]
UniProt Code:	Q13418
NCBI GenInfo Identifier:	9973397
NCBI Gene ID:	3611
NCBI Accession:	Q13418.2
UniProt Secondary Accession:	Q13418,P57043, Q68DZ3, B7Z1I0, B7Z418, D3DQU0,
UniProt Related Accession:	Q13418
Molecular Weight:	36,467 Da
NCBI Full Name:	Integrin-linked protein kinase
NCBI Synonym Full Names:	integrin linked kinase
NCBI Official Symbol:	ILK
NCBI Official Synonym Symbols:	P59; ILK-1; ILK-2; p59ILK; HEL-S-28
NCBI Protein Information:	integrin-linked protein kinase
UniProt Protein Name:	Integrin-linked protein kinase
UniProt Synonym Protein Names:	59 kDa serine/threonine-protein kinase; ILK-1; ILK-2; p59ILK
Protein Family:	Integrin-linked protein kinase
UniProt Gene Name:	ILK
UniProt Entry Name:	ILK_HUMAN

Component	Quantity (96 Assays)	Storage
ELISA Microplate (Dismountable)	8×12 strips	-20°C
Lyophilized Standard	2	-20°C
Sample Diluent	20ml	-20°C
Assay Diluent A	10mL	-20°C
Assay Diluent B	10mL	-20°C
Detection Reagent A	120µL	-20°C
Detection Reagent B	120µL	-20°C
Wash Buffer	30mL	4°C
Substrate	10mL	4°C
Stop Solution	10mL	4°C
Plate Sealer	5	-

Other materials and equipment required:

Microplate reader with 450 nm wavelength filter
Multichannel Pipette, Pipette, microcentrifuge tubes and disposable pipette tips
Incubator
Deionized or distilled water
Absorbent paper
Buffer resevoir

*Note: The below protocol is a sample protocol. Protocols are specific to each batch/lot. For the correct instructions please follow the protocol included in your kit.

Allow all reagents to reach room temperature (Please do not dissolve the reagents at 37°C directly). All the reagents should be mixed thoroughly by gently swirling before pipetting. Avoid foaming. Keep appropriate numbers of strips for 1 experiment and remove extra strips from microtiter plate. Removed strips should be resealed and stored at -20°C until the kits expiry date. Prepare all reagents, working standards and samples as directed in the previous sections. Please predict the concentration before assaying. If values for these are not within the range of the standard curve, users must determine the optimal sample dilutions for their experiments. We recommend running all samples in duplicate.

Step
1.	Add Sample: Add 100µL of Standard, Blank, or Sample per well. The blank well is added with Sample diluent. Solutions are added to the bottom of micro ELISA plate well, avoid inside wall touching and foaming as possible. Mix it gently. Cover the plate with sealer we provided. Incubate for 120 minutes at 37°C.
2.	Remove the liquid from each well, don't wash. Add 100µL of Detection Reagent A working solution to each well. Cover with the Plate sealer. Gently tap the plate to ensure thorough mixing. Incubate for 1 hour at 37°C. Note: if Detection Reagent A appears cloudy warm to room temperature until solution is uniform.
3.	Aspirate each well and wash, repeating the process three times. Wash by filling each well with Wash Buffer (approximately 400µL) (a squirt bottle, multi-channel pipette,manifold dispenser or automated washer are needed). Complete removal of liquid at each step is essential. After the last wash, completely remove remaining Wash Buffer by aspirating or decanting. Invert the plate and pat it against thick clean absorbent paper.
4.	Add 100µL of Detection Reagent B working solution to each well. Cover with the Plate sealer. Incubate for 60 minutes at 37°C.
5.	Repeat the wash process for five times as conducted in step 3.
6.	Add 90µL of Substrate Solution to each well. Cover with a new Plate sealer and incubate for 10-20 minutes at 37°C. Protect the plate from light. The reaction time can be shortened or extended according to the actual color change, but this should not exceed more than 30 minutes. When apparent gradient appears in standard wells, user should terminatethe reaction.
7.	Add 50µL of Stop Solution to each well. If color change does not appear uniform, gently tap the plate to ensure thorough mixing.
8.	Determine the optical density (OD value) of each well at once, using a micro-plate reader set to 450 nm. User should open the micro-plate reader in advance, preheat the instrument, and set the testing parameters.
9.	After experiment, store all reagents according to the specified storage temperature respectively until their expiry.

When carrying out an ELISA assay it is important to prepare your samples in order to achieve the best possible results. Below we have a list of procedures for the preparation of samples for different sample types.

Sample Type	Protocol
Serum	If using serum separator tubes, allow samples to clot for 30 minutes at room temperature. Centrifuge for 10 minutes at 1,000x g. Collect the serum fraction and assay promptly or aliquot and store the samples at -80°C. Avoid multiple freeze-thaw cycles. If serum separator tubes are not being used, allow samples to clot overnight at 2-8°C. Centrifuge for 10 minutes at 1,000x g. Remove serum and assay promptly or aliquot and store the samples at -80°C. Avoid multiple freeze-thaw cycles.
Plasma	Collect plasma using EDTA or heparin as an anticoagulant. Centrifuge samples at 4°C for 15 mins at 1000 × g within 30 mins of collection. Collect the plasma fraction and assay promptly or aliquot and store the samples at -80°C. Avoid multiple freeze-thaw cycles. Note: Over haemolysed samples are not suitable for use with this kit.
Urine & Cerebrospinal Fluid	Collect the urine (mid-stream) in a sterile container, centrifuge for 20 mins at 2000-3000 rpm. Remove supernatant and assay immediately. If any precipitation is detected, repeat the centrifugation step. A similar protocol can be used for cerebrospinal fluid.
Cell culture supernatant	Collect the cell culture media by pipette, followed by centrifugation at 4°C for 20 mins at 1500 rpm. Collect the clear supernatant and assay immediately.
Cell lysates	Solubilize cells in lysis buffer and allow to sit on ice for 30 minutes. Centrifuge tubes at 14,000 x g for 5 minutes to remove insoluble material. Aliquot the supernatant into a new tube and discard the remaining whole cell extract. Quantify total protein concentration using a total protein assay. Assay immediately or aliquot and store at ≤ -20 °C.
Tissue homogenates	The preparation of tissue homogenates will vary depending upon tissue type. Rinse tissue with 1X PBS to remove excess blood & homogenize in 20ml of 1X PBS (including protease inhibitors) and store overnight at ≤ -20°C. Two freeze-thaw cycles are required to break the cell membranes. To further disrupt the cell membranes you can sonicate the samples. Centrifuge homogenates for 5 mins at 5000xg. Remove the supernatant and assay immediately or aliquot and store at -20°C or -80°C.
Tissue lysates	Rinse tissue with PBS, cut into 1-2 mm pieces, and homogenize with a tissue homogenizer in PBS. Add an equal volume of RIPA buffer containing protease inhibitors and lyse tissues at room temperature for 30 minutes with gentle agitation. Centrifuge to remove debris. Quantify total protein concentration using a total protein assay. Assay immediately or aliquot and store at ≤ -20 °C.
Breast Milk	Collect milk samples and centrifuge at 10,000 x g for 60 min at 4°C. Aliquot the supernatant and assay. For long term use, store samples at -80°C. Minimize freeze/thaw cycles.

ELISA

Human ILK-1(Integrin-Linked Kinase 1) ELISA Kit

ILK Colorimetric Cell-Based ELISA Kit