Human ID1 (Inhibitor of differentiation 1) ELISA Kit (HUFI03859)
- SKU:
- HUFI03859
- Product Type:
- ELISA Kit
- Size:
- 96 Assays
- Uniprot:
- P41134
- Sensitivity:
- 46.875pg/ml
- Range:
- 78.125-5000pg/ml
- ELISA Type:
- Sandwich
- Synonyms:
- ID1
- Reactivity:
- Human
Description
Human ID1 (Inhibitor of differentiation 1) ELISA Kit (HUFI03859)
The Human ID1 (Inhibitor of Differentiation 1) ELISA Kit is a powerful tool for detecting ID1 levels in human samples such as serum, plasma, and cell culture supernatants. This kit provides accurate and reliable results with high sensitivity and specificity, making it suitable for various research applications.ID1 is a key regulator of cell differentiation and plays a crucial role in several physiological and pathological processes, including cancer progression and metastasis.
By measuring ID1 levels, researchers can gain valuable insights into the underlying mechanisms of these conditions and potentially identify new therapeutic targets.Overall, the Human ID1 ELISA Kit is an essential tool for researchers studying the role of ID1 in various diseases and exploring its potential as a biomarker for diagnosis and treatment monitoring.
| Product Name: | Human ID1 (Inhibitor of differentiation 1) ELISA Kit |
| Product Code: | HUFI03859 |
| Size: | 96 Assays |
| Alias: | ID1 ELISA Kit |
| Detection method: | Sandwich ELISA, Double Antibody |
| Application: | This immunoassay kit allows for the in vitro quantitative determination of Human ID1 (Inhibitor of differentiation 1) concentrations in serum plasma and other biological fluids. |
| Sensitivity: | < 46.875pg/ml |
| Range: | 78.125-5000pg/ml |
| Storage: | 4°C for 6 months |
| Note: | For Research Use Only |
| Recovery: | Matrices listed below were spiked with certain level of Human ID1 (Inhibitor of differentiation 1) and the recovery rates were calculated by comparing the measured value to the expected amount of Human ID1 (Inhibitor of differentiation 1) in samples. Enquire for more information. |
| Linearity: | The linearity of the kit was assayed by testing samples spiked with appropriate concentration of Human ID1 (Inhibitor of differentiation 1) and their serial dilutions. The results were demonstrated by the percentage of calculated concentration to the expected. Enquire for more information. |
| CV(%): | Intra-Assay: CV<8% Inter-Assay: CV<10% |
| Component | Quantity | Storage |
| ELISA Microplate (Dismountable) | 8×12 strips | 4°C for 6 months |
| Lyophilized Standard | 2 | 4°C/-20°C |
| Sample/Standard Dilution Buffer | 20ml | 4°C |
| Biotin-labeled Antibody(Concentrated) | 120ul | 4°C (Protect from light) |
| Antibody Dilution Buffer | 10ml | 4°C |
| HRP-Streptavidin Conjugate(SABC) | 120ul | 4°C (Protect from light) |
| SABC Dilution Buffer | 10ml | 4°C |
| TMB Substrate | 10ml | 4°C (Protect from light) |
| Stop Solution | 10ml | 4°C |
| Wash Buffer(25X) | 30ml | 4°C |
| Plate Sealer | 5 | - |
Other materials and equipment required:
- Microplate reader with 450 nm wavelength filter
- Multichannel Pipette, Pipette, microcentrifuge tubes and disposable pipette tips
- Incubator
- Deionized or distilled water
- Absorbent paper
- Buffer resevoir
| UniProt Protein Function: | ID1: ID (inhibitor of DNA binding) HLH proteins lack a basic DNA-binding domain but are able to form heterodimers with other HLH proteins, thereby inhibiting DNA binding. 2 isoforms of the human protein are produced by alternative splicing. |
| UniProt Protein Details: | Protein type:Transcription, coactivator/corepressor; DNA-binding Chromosomal Location of Human Ortholog: 20q11 Cellular Component: nucleoplasm; Golgi apparatus; nucleus Molecular Function:protein dimerization activity; protein binding; transcription factor activity Biological Process: circadian rhythm; collagen metabolic process; blood vessel endothelial cell migration; transcription, DNA-dependent; protein destabilization; heart development; negative regulation of transcription factor activity; negative regulation of transcription from RNA polymerase II promoter; regulation of angiogenesis; negative regulation of DNA binding; BMP signaling pathway; response to antibiotic; regulation of MAPKKK cascade; transforming growth factor beta receptor signaling pathway; blood vessel morphogenesis; negative regulation of osteoblast differentiation; endothelial cell morphogenesis; angiogenesis; negative regulation of transcription, DNA-dependent; negative regulation of apoptosis |
| NCBI Summary: | The protein encoded by this gene is a helix-loop-helix (HLH) protein that can form heterodimers with members of the basic HLH family of transcription factors. The encoded protein has no DNA binding activity and therefore can inhibit the DNA binding and transcriptional activation ability of basic HLH proteins with which it interacts. This protein may play a role in cell growth, senescence, and differentiation. Two transcript variants encoding different isoforms have been found for this gene. [provided by RefSeq, Jul 2008] |
| UniProt Code: | P41134 |
| NCBI GenInfo Identifier: | 31317297 |
| NCBI Gene ID: | 3397 |
| NCBI Accession: | NP_851998.1 |
| UniProt Secondary Accession: | P41134,O00651, O00652, Q16371, Q16377, Q5TE66, Q5TE67 Q969Z7, Q9H0Z5, Q9H109, A8K537, E1P5L4, |
| UniProt Related Accession: | P41134 |
| Molecular Weight: | 15,586 Da |
| NCBI Full Name: | DNA-binding protein inhibitor ID-1 isoform b |
| NCBI Synonym Full Names: | inhibitor of DNA binding 1, HLH protein |
| NCBI Official Symbol: | ID1 |
| NCBI Official Synonym Symbols: | ID; bHLHb24 |
| NCBI Protein Information: | DNA-binding protein inhibitor ID-1 |
| UniProt Protein Name: | DNA-binding protein inhibitor ID-1 |
| UniProt Synonym Protein Names: | Class B basic helix-loop-helix protein 24; bHLHb24; Inhibitor of DNA binding 1; Inhibitor of differentiation 1 |
| Protein Family: | DNA-binding protein inhibitor |
| UniProt Gene Name: | ID1 |
| UniProt Entry Name: | ID1_HUMAN |
*Note: Protocols are specific to each batch/lot. For the correct instructions please follow the protocol included in your kit.
Before adding to wells, equilibrate the SABC working solution and TMB substrate for at least 30 min at 37 °C. When diluting samples and reagents, they must be mixed completely and evenly. It is recommended to plot a standard curve for each test.
| Step | Protocol |
| 1. | Set standard, test sample and control (zero) wells on the pre-coated plate respectively, and then, record their positions. It is recommended to measure each standard and sample in duplicate. Wash plate 2 times before adding standard, sample and control (zero) wells! |
| 2. | Aliquot 0.1ml standard solutions into the standard wells. |
| 3. | Add 0.1 ml of Sample / Standard dilution buffer into the control (zero) well. |
| 4. | Add 0.1 ml of properly diluted sample ( Human serum, plasma, tissue homogenates and other biological fluids.) into test sample wells. |
| 5. | Seal the plate with a cover and incubate at 37 °C for 90 min. |
| 6. | Remove the cover and discard the plate content, clap the plate on the absorbent filter papers or other absorbent material. Do NOT let the wells completely dry at any time. Wash plate X2. |
| 7. | Add 0.1 ml of Biotin- detection antibody working solution into the above wells (standard, test sample & zero wells). Add the solution at the bottom of each well without touching the side wall. |
| 8. | Seal the plate with a cover and incubate at 37 °C for 60 min. |
| 9. | Remove the cover, and wash plate 3 times with Wash buffer. Let wash buffer rest in wells for 1 min between each wash. |
| 10. | Add 0.1 ml of SABC working solution into each well, cover the plate and incubate at 37 °C for 30 min. |
| 11. | Remove the cover and wash plate 5 times with Wash buffer, and each time let the wash buffer stay in the wells for 1-2 min. |
| 12. | Add 90 µL of TMB substrate into each well, cover the plate and incubate at 37 °C in dark within 10-20 min. (Note: This incubation time is for reference use only, the optimal time should be determined by end user.) And the shades of blue can be seen in the first 3-4 wells (with most concentrated standard solutions), the other wells show no obvious color. |
| 13. | Add 50 µL of Stop solution into each well and mix thoroughly. The color changes into yellow immediately. |
| 14. | Read the O.D. absorbance at 450 nm in a microplate reader immediately after adding the stop solution. |
When carrying out an ELISA assay it is important to prepare your samples in order to achieve the best possible results. Below we have a list of procedures for the preparation of samples for different sample types.
| Sample Type | Protocol |
| Serum | If using serum separator tubes, allow samples to clot for 30 minutes at room temperature. Centrifuge for 10 minutes at 1,000x g. Collect the serum fraction and assay promptly or aliquot and store the samples at -80°C. Avoid multiple freeze-thaw cycles. If serum separator tubes are not being used, allow samples to clot overnight at 2-8°C. Centrifuge for 10 minutes at 1,000x g. Remove serum and assay promptly or aliquot and store the samples at -80°C. Avoid multiple freeze-thaw cycles. |
| Plasma | Collect plasma using EDTA or heparin as an anticoagulant. Centrifuge samples at 4°C for 15 mins at 1000 × g within 30 mins of collection. Collect the plasma fraction and assay promptly or aliquot and store the samples at -80°C. Avoid multiple freeze-thaw cycles. Note: Over haemolysed samples are not suitable for use with this kit. |
| Urine & Cerebrospinal Fluid | Collect the urine (mid-stream) in a sterile container, centrifuge for 20 mins at 2000-3000 rpm. Remove supernatant and assay immediately. If any precipitation is detected, repeat the centrifugation step. A similar protocol can be used for cerebrospinal fluid. |
| Cell culture supernatant | Collect the cell culture media by pipette, followed by centrifugation at 4°C for 20 mins at 1500 rpm. Collect the clear supernatant and assay immediately. |
| Cell lysates | Solubilize cells in lysis buffer and allow to sit on ice for 30 minutes. Centrifuge tubes at 14,000 x g for 5 minutes to remove insoluble material. Aliquot the supernatant into a new tube and discard the remaining whole cell extract. Quantify total protein concentration using a total protein assay. Assay immediately or aliquot and store at ≤ -20 °C. |
| Tissue homogenates | The preparation of tissue homogenates will vary depending upon tissue type. Rinse tissue with 1X PBS to remove excess blood & homogenize in 20ml of 1X PBS (including protease inhibitors) and store overnight at ≤ -20°C. Two freeze-thaw cycles are required to break the cell membranes. To further disrupt the cell membranes you can sonicate the samples. Centrifuge homogenates for 5 mins at 5000xg. Remove the supernatant and assay immediately or aliquot and store at -20°C or -80°C. |
| Tissue lysates | Rinse tissue with PBS, cut into 1-2 mm pieces, and homogenize with a tissue homogenizer in PBS. Add an equal volume of RIPA buffer containing protease inhibitors and lyse tissues at room temperature for 30 minutes with gentle agitation. Centrifuge to remove debris. Quantify total protein concentration using a total protein assay. Assay immediately or aliquot and store at ≤ -20 °C. |
| Breast Milk | Collect milk samples and centrifuge at 10,000 x g for 60 min at 4°C. Aliquot the supernatant and assay. For long term use, store samples at -80°C. Minimize freeze/thaw cycles. |
Related Products
Human TIMP1 / Metalloproteinase inhibitor 1 ELISA Kit
Human Complement 1 Inhibitor (C1INH) ELISA Kit
Human GDP Dissociation Inhibitor 1 (GDI1) ELISA Kit
Human Plasminogen Activator Inhibitor 1 (PAI1) ELISA Kit
Human Metalloproteinase inhibitor 1 (TIMP1) ELISA Kit (HUEB0195)
Human C1INH (Complement 1 Inhibitor) ELISA Kit (AEES00088)
Human PAI1 / Plasminogen activator inhibitor 1 ELISA Kit
