null

Human HACE1 ELISA Kit

SKU:
HUFI01956
Product Type:
ELISA Kit
Size:
96 Assays
Uniprot:
Q8IYU2
Sensitivity:
0.094ng/ml
Range:
0.156-10ng/ml
ELISA Type:
Sandwich
Synonyms:
HACE1, HECT domain and ankyrin repeat-containing E3 ubiquitin-protein ligase 1, HACE1, KIAA1320, 6.3.2.-
Reactivity:
Human
Research Area:
Cell Cycle
$719
Frequently bought together:

Description

system_update_altDatasheetsystem_update_altMSDS

Human HACE1 ELISA Kit

The Human HACE1 ELISA Kit is specifically designed for the precise measurement of HACE1 levels in human samples, including serum, plasma, and cell culture supernatants. This kit offers outstanding sensitivity and specificity, guaranteeing accurate and consistent results for a variety of research purposes.HACE1 is a key enzyme that plays a critical role in regulating the ubiquitin-proteasome system, which is essential for protein degradation and cellular homeostasis. Dysregulation of HACE1 has been linked to various diseases, including cancer, neurodegenerative disorders, and autoimmune conditions, making it a valuable biomarker for investigating these diseases and potential therapeutic interventions.

Overall, the Human HACE1 ELISA Kit is an indispensable tool for researchers studying the role of HACE1 in various physiological and pathological processes, offering a reliable and efficient method for quantifying HACE1 levels in human samples.

Product Name:Human HACE1 ELISA Kit
Product Code:HUFI01956
Size:96 Assays
Alias:HACE1, HECT domain and ankyrin repeat-containing E3 ubiquitin-protein ligase 1, HACE1, KIAA1320, 6.3.2.-
Detection method:Sandwich ELISA, Double Antibody
Application:This immunoassay kit allows for the in vitro quantitative determination of Human HACE1 concentrations in serum plasma and other biological fluids.
Sensitivity:0.094ng/ml
Range:0.156-10ng/ml
Storage:4°C for 6 months
Note:For Research Use Only
Recovery:Matrices listed below were spiked with certain level of Human HACE1 and the recovery rates were calculated by comparing the measured value to the expected amount of Human HACE1 in samples.
MatrixRecovery range(%)Average(%)
serum(n=5)86-10395
EDTA plasma(n=5)89-10196
UFH plasma(n=5)86-10496
Linearity:The linearity of the kit was assayed by testing samples spiked with appropriate concentration of Human HACE1 and their serial dilutions. The results were demonstrated by the percentage of calculated concentration to the expected.
Sample1:21:41:8
serum(n=5)85-104%85-105%91-103%
EDTA plasma(n=5)87-100%84-101%88-101%
UFH plasma(n=5)81-97%92-97%85-98%
CV(%):Intra-Assay: CV<8%
Inter-Assay: CV<10%
ComponentQuantityStorage
ELISA Microplate (Dismountable)8×12 strips4°C for 6 months
Lyophilized Standard24°C/-20°C
Sample/Standard Dilution Buffer20ml4°C
Biotin-labeled Antibody(Concentrated)120ul4°C (Protect from light)
Antibody Dilution Buffer10ml4°C
HRP-Streptavidin Conjugate(SABC)120ul4°C (Protect from light)
SABC Dilution Buffer10ml4°C
TMB Substrate10ml4°C (Protect from light)
Stop Solution10ml4°C
Wash Buffer(25X)30ml4°C
Plate Sealer5-

Other materials and equipment required:

  • Microplate reader with 450 nm wavelength filter
  • Multichannel Pipette, Pipette, microcentrifuge tubes and disposable pipette tips
  • Incubator
  • Deionized or distilled water
  • Absorbent paper
  • Buffer resevoir
UniprotQ8IYU2
UniProt Protein Function:HAS1: Plays a role in hyaluronan/hyaluronic acid (HA) synthesis. Also able to catalyze the synthesis of chito- oligosaccharide depending on the substrate. Belongs to the NodC/HAS family.
UniProt Protein Details:Protein type:Cell adhesion; EC 2.4.1.212; Motility/polarity/chemotaxis; Membrane protein, integral; Membrane protein, multi-pass; Transferase

Chromosomal Location of Human Ortholog: 19q13.4

Cellular Component: cytoplasm; integral to plasma membrane; plasma membrane

Molecular Function:hyaluronan synthase activity

Biological Process: carbohydrate metabolic process; cell adhesion; extracellular polysaccharide biosynthetic process; glycosaminoglycan biosynthetic process; glycosaminoglycan metabolic process; hyaluronan biosynthetic process; hyaluronan metabolic process

NCBI Summary:This gene encodes a HECT domain and ankyrin repeat-containing ubiquitin ligase. The encoded protein is involved in specific tagging of target proteins, leading to their subcellular localization or proteasomal degradation. The protein is a potential tumor suppressor and is involved in the pathophysiology of several tumors, including Wilm's tumor. [provided by RefSeq, Mar 2016]
UniProt Code:Q8IYU2
NCBI GenInfo Identifier:116875852
NCBI Gene ID:57531
NCBI Accession:NP_065822
UniProt Related Accession:Q8IYU2
Molecular Weight:76kDa
NCBI Full Name:E3 ubiquitin-protein ligase HACE1 isoform a
NCBI Synonym Full Names:HECT domain and ankyrin repeat containing E3 ubiquitin protein ligase 1
NCBI Official Symbol:HACE1  
NCBI Official Synonym Symbols:SPPRS  
NCBI Protein Information:E3 ubiquitin-protein ligase HACE1
UniProt Protein Name:Hyaluronan synthase 1
UniProt Synonym Protein Names:Hyaluronate synthase 1; Hyaluronic acid synthase 1; HA synthase 1; HuHAS1
Protein Family:Hyaluronan synthase
UniProt Gene Name:HAS1  
UniProt Entry Name:HYAS1_HUMAN

*Note: Protocols are specific to each batch/lot. For the correct instructions please follow the protocol included in your kit.

Before adding to wells, equilibrate the SABC working solution and TMB substrate for at least 30 min at 37°C. When diluting samples and reagents, they must be mixed completely and evenly. It is recommended to plot a standard curve for each test.

StepProtocol
1.Set standard, test sample and control (zero) wells on the pre-coated plate respectively, and then, record their positions. It is recommended to measure each standard and sample in duplicate. Wash plate 2 times before adding standard, sample and control (zero) wells!
2.Aliquot 0.1ml standard solutions into the standard wells.
3.Add 0.1 ml of Sample / Standard dilution buffer into the control (zero) well.
4.Add 0.1 ml of properly diluted sample ( Human serum, plasma, tissue homogenates and other biological fluids.) into test sample wells.
5.Seal the plate with a cover and incubate at 37 °C for 90 min.
6.Remove the cover and discard the plate content, clap the plate on the absorbent filter papers or other absorbent material. Do NOT let the wells completely dry at any time. Wash plate X2.
7.Add 0.1 ml of Biotin- detection antibody working solution into the above wells (standard, test sample & zero wells). Add the solution at the bottom of each well without touching the side wall.
8.Seal the plate with a cover and incubate at 37°C for 60 min.
9.Remove the cover, and wash plate 3 times with Wash buffer. Let wash buffer rest in wells for 1 min between each wash.
10.Add 0.1 ml of SABC working solution into each well, cover the plate and incubate at 37°C for 30 min.
11.Remove the cover and wash plate 5 times with Wash buffer, and each time let the wash buffer stay in the wells for 1-2 min.
12.Add 90 µl of TMB substrate into each well, cover the plate and incubate at 37°C in dark within 10-20 min. (Note: This incubation time is for reference use only, the optimal time should be determined by end user.) And the shades of blue can be seen in the first 3-4 wells (with most concentrated standard solutions), the other wells show no obvious color.
13.Add 50 µl of Stop solution into each well and mix thoroughly. The color changes into yellow immediately.
14. Read the O.D. absorbance at 450 nm in a microplate reader immediately after adding the stop solution.

When carrying out an ELISA assay it is important to prepare your samples in order to achieve the best possible results. Below we have a list of procedures for the preparation of samples for different sample types.

Sample TypeProtocol
SerumIf using serum separator tubes, allow samples to clot for 30 minutes at room temperature. Centrifuge for 10 minutes at 1,000x g. Collect the serum fraction and assay promptly or aliquot and store the samples at -80°C. Avoid multiple freeze-thaw cycles.

If serum separator tubes are not being used, allow samples to clot overnight at 2-8°C. Centrifuge for 10 minutes at 1,000x g. Remove serum and assay promptly or aliquot and store the samples at -80°C. Avoid multiple freeze-thaw cycles.

PlasmaCollect plasma using EDTA or heparin as an anticoagulant. Centrifuge samples at 4°C for 15 mins at 1000 × g within 30 mins of collection. Collect the plasma fraction and assay promptly or aliquot and store the samples at -80°C. Avoid multiple freeze-thaw cycles. Note: Over haemolysed samples are not suitable for use with this kit.
Urine & Cerebrospinal FluidCollect the urine (mid-stream) in a sterile container, centrifuge for 20 mins at 2000-3000 rpm. Remove supernatant and assay immediately. If any precipitation is detected, repeat the centrifugation step. A similar protocol can be used for cerebrospinal fluid.
Cell culture supernatantCollect the cell culture media by pipette, followed by centrifugation at 4°C for 20 mins at 1500 rpm. Collect the clear supernatant and assay immediately.
Cell lysatesSolubilize cells in lysis buffer and allow to sit on ice for 30 minutes. Centrifuge tubes at 14,000 x g for 5 minutes to remove insoluble material. Aliquot the supernatant into a new tube and discard the remaining whole cell extract. Quantify total protein concentration using a total protein assay. Assay immediately or aliquot and store at ≤ -20 °C.
Tissue homogenatesThe preparation of tissue homogenates will vary depending upon tissue type. Rinse tissue with 1X PBS to remove excess blood & homogenize in 20ml of 1X PBS (including protease inhibitors) and store overnight at ≤ -20°C. Two freeze-thaw cycles are required to break the cell membranes. To further disrupt the cell membranes you can sonicate the samples. Centrifuge homogenates for 5 mins at 5000xg. Remove the supernatant and assay immediately or aliquot and store at -20°C or -80°C.
Tissue lysatesRinse tissue with PBS, cut into 1-2 mm pieces, and homogenize with a tissue homogenizer in PBS. Add an equal volume of RIPA buffer containing protease inhibitors and lyse tissues at room temperature for 30 minutes with gentle agitation. Centrifuge to remove debris. Quantify total protein concentration using a total protein assay. Assay immediately or aliquot and store at ≤ -20 °C.
Breast MilkCollect milk samples and centrifuge at 10,000 x g for 60 min at 4°C. Aliquot the supernatant and assay. For long term use, store samples at -80°C. Minimize freeze/thaw cycles.

Related Products