Human FOXO4 (Forkhead box protein O4) ELISA Kit (HUFI04247)
- SKU:
- HUFI04247
- Product Type:
- ELISA Kit
- Size:
- 96 Assays
- Uniprot:
- P98177
- Sensitivity:
- 0.094ng/ml
- Range:
- 0.156-10ng/ml
- ELISA Type:
- Sandwich
- Synonyms:
- Forkhead box protein O4, Fork head domain transcription factor AFX1, FOXO4, AFX, AFX1, MLLT7
- Reactivity:
- Human
Description
Human FOXO4 (Forkhead box protein O4) ELISA Kit (HUFI04247)
The Human FOXO4 (Forkhead Box Protein O4) ELISA Kit is specifically designed for the precise measurement of FOXO4 levels in human samples, including serum, plasma, and cell culture supernatants. With its high sensitivity and specificity, this kit provides reliable and reproducible results, making it an ideal tool for a variety of research applications.FOXO4 is a key transcription factor that plays a crucial role in regulating cell cycle progression, apoptosis, and DNA damage repair. It is involved in various cellular processes, including oxidative stress response and longevity.
Dysregulation of FOXO4 has been implicated in cancer, aging, and metabolic disorders, making it a valuable biomarker for studying these conditions and developing potential therapeutic interventions.Overall, the Human FOXO4 ELISA Kit offers researchers a powerful tool for investigating the role of FOXO4 in health and disease, providing valuable insights into its molecular mechanisms and potential therapeutic targets.
| Product Name: | Human FOXO4 (Forkhead box protein O4) ELISA Kit |
| Product Code: | HUFI04247 |
| Size: | 96 Assays |
| Alias: | Forkhead box protein O4 ELISA Kit, Fork head domain transcription factor AFX1 ELISA Kit, FOXO4 ELISA Kit, AFX ELISA Kit, AFX1 ELISA Kit, MLLT7 ELISA Kit |
| Detection method: | Sandwich ELISA, Double Antibody |
| Application: | This immunoassay kit allows for the in vitro quantitative determination of Human FOXO4 (Forkhead box protein O4) concentrations in serum plasma and other biological fluids. |
| Sensitivity: | < 0.094ng/ml |
| Range: | 0.156-10ng/ml |
| Storage: | 4°C for 6 months |
| Note: | For Research Use Only |
| Recovery: | Matrices listed below were spiked with certain level of Human FOXO4 (Forkhead box protein O4) and the recovery rates were calculated by comparing the measured value to the expected amount of Human FOXO4 (Forkhead box protein O4) in samples. | ||||||||||||||||
| |||||||||||||||||
| Linearity: | The linearity of the kit was assayed by testing samples spiked with appropriate concentration of Human FOXO4 (Forkhead box protein O4) and their serial dilutions. The results were demonstrated by the percentage of calculated concentration to the expected. | ||||||||||||||||
| |||||||||||||||||
| CV(%): | Intra-Assay: CV<8% Inter-Assay: CV<10% |
| Component | Quantity | Storage |
| ELISA Microplate (Dismountable) | 8×12 strips | 4°C for 6 months |
| Lyophilized Standard | 2 | 4°C/-20°C |
| Sample/Standard Dilution Buffer | 20ml | 4°C |
| Biotin-labeled Antibody(Concentrated) | 120ul | 4°C (Protect from light) |
| Antibody Dilution Buffer | 10ml | 4°C |
| HRP-Streptavidin Conjugate(SABC) | 120ul | 4°C (Protect from light) |
| SABC Dilution Buffer | 10ml | 4°C |
| TMB Substrate | 10ml | 4°C (Protect from light) |
| Stop Solution | 10ml | 4°C |
| Wash Buffer(25X) | 30ml | 4°C |
| Plate Sealer | 5 | - |
Other materials and equipment required:
- Microplate reader with 450 nm wavelength filter
- Multichannel Pipette, Pipette, microcentrifuge tubes and disposable pipette tips
- Incubator
- Deionized or distilled water
- Absorbent paper
- Buffer resevoir
| UniProt Protein Function: | FOXO4: transcription factor AFX1 containing 1 fork-head domain. May play a role in the insulin signaling pathway. Involved in acute leukemias by a chromosomal translocation t(X;11)(q13;q23) that involves MLLT7 and MLL/HRX. The result is a rogue activator protein. Two splice-variant isoforms have been described. |
| UniProt Protein Details: | Protein type:Oncoprotein; Transcription factor; DNA-binding Chromosomal Location of Human Ortholog: Xq13.1 Cellular Component: cytoplasm; cytosol; nucleoplasm; nucleus Molecular Function:beta-catenin binding; DNA binding; enzyme binding; identical protein binding; protein binding; sequence-specific DNA binding; transcription factor activity; transcription factor binding Biological Process: cell cycle arrest; insulin receptor signaling pathway; negative regulation of angiogenesis; negative regulation of cell proliferation; negative regulation of smooth muscle cell differentiation; positive regulation of transcription from RNA polymerase II promoter; regulation of transcription, DNA-dependent; stem cell differentiation; transcription from RNA polymerase II promoter |
| NCBI Summary: | This gene encodes a member of the O class of winged helix/forkhead transcription factor family. Proteins encoded by this class are regulated by factors involved in growth and differentiation indicating they play a role in these processes. A translocation involving this gene on chromosome X and the homolog of the Drosophila trithorax gene, encoding a DNA binding protein, located on chromosome 11 is associated with leukemia. Multiple transcript variants encoding different isoforms have been found for this gene. [provided by RefSeq, Jan 2010] |
| UniProt Code: | P98177 |
| NCBI GenInfo Identifier: | 110825720 |
| NCBI Gene ID: | 4303 |
| NCBI Accession: | P98177.5 |
| UniProt Secondary Accession: | P98177,O43821, Q13720, Q3KPF1, Q8TDK9, B7WPJ7, |
| UniProt Related Accession: | P98177 |
| Molecular Weight: | 47,941 Da |
| NCBI Full Name: | Forkhead box protein O4 |
| NCBI Synonym Full Names: | forkhead box O4 |
| NCBI Official Symbol: | FOXO4 |
| NCBI Official Synonym Symbols: | AFX; AFX1; MLLT7 |
| NCBI Protein Information: | forkhead box protein O4 |
| UniProt Protein Name: | Forkhead box protein O4 |
| UniProt Synonym Protein Names: | Fork head domain transcription factor AFX1 |
| Protein Family: | Forkhead box protein |
| UniProt Gene Name: | FOXO4 |
| UniProt Entry Name: | FOXO4_HUMAN |
*Note: Protocols are specific to each batch/lot. For the correct instructions please follow the protocol included in your kit.
Before adding to wells, equilibrate the SABC working solution and TMB substrate for at least 30 min at 37 °C. When diluting samples and reagents, they must be mixed completely and evenly. It is recommended to plot a standard curve for each test.
| Step | Protocol |
| 1. | Set standard, test sample and control (zero) wells on the pre-coated plate respectively, and then, record their positions. It is recommended to measure each standard and sample in duplicate. Wash plate 2 times before adding standard, sample and control (zero) wells! |
| 2. | Aliquot 0.1ml standard solutions into the standard wells. |
| 3. | Add 0.1 ml of Sample / Standard dilution buffer into the control (zero) well. |
| 4. | Add 0.1 ml of properly diluted sample ( Human serum, plasma, tissue homogenates and other biological fluids.) into test sample wells. |
| 5. | Seal the plate with a cover and incubate at 37 °C for 90 min. |
| 6. | Remove the cover and discard the plate content, clap the plate on the absorbent filter papers or other absorbent material. Do NOT let the wells completely dry at any time. Wash plate X2. |
| 7. | Add 0.1 ml of Biotin- detection antibody working solution into the above wells (standard, test sample & zero wells). Add the solution at the bottom of each well without touching the side wall. |
| 8. | Seal the plate with a cover and incubate at 37 °C for 60 min. |
| 9. | Remove the cover, and wash plate 3 times with Wash buffer. Let wash buffer rest in wells for 1 min between each wash. |
| 10. | Add 0.1 ml of SABC working solution into each well, cover the plate and incubate at 37 °C for 30 min. |
| 11. | Remove the cover and wash plate 5 times with Wash buffer, and each time let the wash buffer stay in the wells for 1-2 min. |
| 12. | Add 90 µL of TMB substrate into each well, cover the plate and incubate at 37 °C in dark within 10-20 min. (Note: This incubation time is for reference use only, the optimal time should be determined by end user.) And the shades of blue can be seen in the first 3-4 wells (with most concentrated standard solutions), the other wells show no obvious color. |
| 13. | Add 50 µL of Stop solution into each well and mix thoroughly. The color changes into yellow immediately. |
| 14. | Read the O.D. absorbance at 450 nm in a microplate reader immediately after adding the stop solution. |
When carrying out an ELISA assay it is important to prepare your samples in order to achieve the best possible results. Below we have a list of procedures for the preparation of samples for different sample types.
| Sample Type | Protocol |
| Serum | If using serum separator tubes, allow samples to clot for 30 minutes at room temperature. Centrifuge for 10 minutes at 1,000x g. Collect the serum fraction and assay promptly or aliquot and store the samples at -80°C. Avoid multiple freeze-thaw cycles. If serum separator tubes are not being used, allow samples to clot overnight at 2-8°C. Centrifuge for 10 minutes at 1,000x g. Remove serum and assay promptly or aliquot and store the samples at -80°C. Avoid multiple freeze-thaw cycles. |
| Plasma | Collect plasma using EDTA or heparin as an anticoagulant. Centrifuge samples at 4°C for 15 mins at 1000 × g within 30 mins of collection. Collect the plasma fraction and assay promptly or aliquot and store the samples at -80°C. Avoid multiple freeze-thaw cycles. Note: Over haemolysed samples are not suitable for use with this kit. |
| Urine & Cerebrospinal Fluid | Collect the urine (mid-stream) in a sterile container, centrifuge for 20 mins at 2000-3000 rpm. Remove supernatant and assay immediately. If any precipitation is detected, repeat the centrifugation step. A similar protocol can be used for cerebrospinal fluid. |
| Cell culture supernatant | Collect the cell culture media by pipette, followed by centrifugation at 4°C for 20 mins at 1500 rpm. Collect the clear supernatant and assay immediately. |
| Cell lysates | Solubilize cells in lysis buffer and allow to sit on ice for 30 minutes. Centrifuge tubes at 14,000 x g for 5 minutes to remove insoluble material. Aliquot the supernatant into a new tube and discard the remaining whole cell extract. Quantify total protein concentration using a total protein assay. Assay immediately or aliquot and store at ≤ -20 °C. |
| Tissue homogenates | The preparation of tissue homogenates will vary depending upon tissue type. Rinse tissue with 1X PBS to remove excess blood & homogenize in 20ml of 1X PBS (including protease inhibitors) and store overnight at ≤ -20°C. Two freeze-thaw cycles are required to break the cell membranes. To further disrupt the cell membranes you can sonicate the samples. Centrifuge homogenates for 5 mins at 5000xg. Remove the supernatant and assay immediately or aliquot and store at -20°C or -80°C. |
| Tissue lysates | Rinse tissue with PBS, cut into 1-2 mm pieces, and homogenize with a tissue homogenizer in PBS. Add an equal volume of RIPA buffer containing protease inhibitors and lyse tissues at room temperature for 30 minutes with gentle agitation. Centrifuge to remove debris. Quantify total protein concentration using a total protein assay. Assay immediately or aliquot and store at ≤ -20 °C. |
| Breast Milk | Collect milk samples and centrifuge at 10,000 x g for 60 min at 4°C. Aliquot the supernatant and assay. For long term use, store samples at -80°C. Minimize freeze/thaw cycles. |
Related Products
Human FOXI2 (Forkhead box protein I2)ELISA Kit
Human FOXO3 / Forkhead box protein O3 ELISA Kit
Human FOXA2(Forkhead box protein A2) ELISA Kit
Human FOXP3 / Forkhead box protein P3 ELISA Kit
