null

Human Exhausted CD8+ T Cell ELISA Sampler Pack

SKU:
SKFI0004
Product Type:
ELISA Kit
ELISA Type:
ELISA Sampler Pack
Size:
8 X 48 Assays
Reactivity:
Human
Analytes:
CD3e
TOX2
Granzyme B
TIGIT
CD8A
LAG3
PDCD1
HAVCR2
  • Human CD3e / CD3 epsilon ELISA Kit
  • Human PDCD1 (Programmed Cell Death1) ELISA Kit
  • Human HAVCR2 (Hepatitis A virus cellular receptor 2) ELISA Kit (HUFI08163)
  • Human LAG3 / Lymphocyte activation gene 3 protein ELISA Kit
  • Human CD8 alpha / CD8A ELISA Kit
  • Human TIGIT (T-cell immunoreceptor with Ig and ITIM domains) ELISA Kit (HUFI04821)
  • Human Granzyme B ELISA Kit
  • Human TOX2 (TOX high mobility group box family member 2) ELISA Kit (HUFI06009)
$2,640
Frequently bought together:

Description

Human Exhausted CD8+ T Cell IHC ELISA Sampler Kit

The Human Exhausted CD8+ T Cell ELISA Kit Pack is specifically designed for the precise measurement of exhausted CD8+ T cell levels in human samples such as serum, plasma, and cell culture supernatants. This kit offers exceptional sensitivity and specificity, ensuring accurate and consistent results for a variety of research applications.Exhausted CD8+ T cells are a crucial subset of immune cells that exhibit reduced functionality and are associated with chronic viral infections, cancer, and autoimmune diseases. Monitoring exhausted CD8+ T cell levels can provide valuable insights into immune dysfunction and disease progression, making this kit an essential tool for studying immune responses and developing potential immunotherapies.

With its easy-to-use protocol and reliable performance, the Human Exhausted CD8+ T Cell ELISA Kit Pack is a valuable resource for researchers investigating immune exhaustion and its implications in various disease settings. Order yours today to advance your research and uncover new insights into immune regulation and disease pathology.

Human Exhausted CD8+ T Cell ELISA Sampler Pack

Human Exhausted CD8+ T Cell ELISA Sampler Pack from Assay Genie allows researchers to begin their investigation into Exhausted CD8+ T Cell IHC via analysing CD3e / CD3 epsilon, TOX2, Granzyme B, TIGIT, CD8 alpha / CD8A, LAG3 / Lymphocyte activation gene 3 protein, PDCD1, HAVCR2 in a 48 assay format, thus allowing researchers to identify and validate analytes within the pathway.

Pack ContentsSizeReactivitySensitivityRange ELISA Type
Human CD3e / CD3 epsilon ELISA Kit48 AssaysHuman0.375ng/ml0.625-40ng/mlSandwich ELISA
Human TOX2 (TOX high mobility group box family member 2) ELISA Kit (HUFI06009)48 AssaysHuman--Sandwich ELISA
Human Granzyme B ELISA Kit48 AssaysHuman9.375pg/ml15.625-1000pg/mlSandwich ELISA
Human TIGIT (T-cell immunoreceptor with Ig and ITIM domains) ELISA Kit (HUFI04821)48 AssaysHuman0.094ng/ml0.156-10ng/mlSandwich ELISA
Human CD8 alpha / CD8A ELISA Kit48 AssaysHuman37.5pg/ml62.5-4000pg/mlSandwich ELISA
Human LAG3 / Lymphocyte activation gene 3 protein ELISA Kit48 AssaysHuman46.875pg/ml78.125-5000pg/mlSandwich ELISA
Human PDCD1 (Programmed Cell Death1) ELISA Kit48 AssaysHuman0.094ng/ml0.156-10ng/mlSandwich ELISA
Human HAVCR2 (Hepatitis A virus cellular receptor 2) ELISA Kit (HUFI08163)48 AssaysHuman0.094ng/ml0.156-10ng/mlSandwich ELISA

Each individual ELISA kit in this pack will come with the following components:

Component Quantity Storage
ELISA Microplate (Dismountable) 4-12 strips 4°C for 6 months
Lyophilized Standard 1 4°C/-20°C
Sample/Standard Dilution Buffer 10ml 4°C
Biotin-labeled Antibody(Concentrated) 60ul 4°C (Protect from light)
Antibody Dilution Buffer 5ml 4°C
HRP-Streptavidin Conjugate(SABC) 60ul 4°C (Protect from light)
SABC Dilution Buffer 5ml 4°C
TMB Substrate 10ml 4°C (Protect from light)
Stop Solution 5ml 4°C
Wash Buffer(25X) 15ml 4°C
Plate Sealer 3 -

Other materials and equipment required:

  • Microplate reader with 450 nm wavelength filter
  • Multichannel Pipette, Pipette, microcentrifuge tubes and disposable pipette tips
  • Incubator
  • Deionized or distilled water
  • Absorbent paper
  • Buffer resevoir

When carrying out an ELISA assay it is important to prepare your samples in order to achieve the best possible results. Below we have a list of procedures for the preparation of samples for different sample types.

Sample Type Protocol
Serum If using serum separator tubes, allow samples to clot for 30 minutes at room temperature. Centrifuge for 10 minutes at 1,000x g. Collect the serum fraction and assay promptly or aliquot and store the samples at -80°C. Avoid multiple freeze-thaw cycles.

If serum separator tubes are not being used, allow samples to clot overnight at 2-8°C. Centrifuge for 10 minutes at 1,000x g. Remove serum and assay promptly or aliquot and store the samples at -80°C. Avoid multiple freeze-thaw cycles.
Plasma Collect plasma using EDTA or heparin as an anticoagulant. Centrifuge samples at 4°C for 15 mins at 1000 - g within 30 mins of collection. Collect the plasma fraction and assay promptly or aliquot and store the samples at -80°C. Avoid multiple freeze-thaw cycles. Note: Over haemolysed samples are not suitable for use with this kit.
Urine & Cerebrospinal Fluid Collect the urine (mid-stream) in a sterile container, centrifuge for 20 mins at 2000-3000 rpm. Remove supernatant and assay immediately. If any precipitation is detected, repeat the centrifugation step. A similar protocol can be used for cerebrospinal fluid.
Cell culture supernatant Collect the cell culture media by pipette, followed by centrifugation at 4°C for 20 mins at 1500 rpm. Collect the clear supernatant and assay immediately.
Cell lysates Solubilize cells in lysis buffer and allow to sit on ice for 30 minutes. Centrifuge tubes at 14,000 x g for 5 minutes to remove insoluble material. Aliquot the supernatant into a new tube and discard the remaining whole cell extract. Quantify total protein concentration using a total protein assay. Assay immediately or aliquot and store at ≤ -20 °C.
Tissue homogenates The preparation of tissue homogenates will vary depending upon tissue type. Rinse tissue with 1X PBS to remove excess blood & homogenize in 20ml of 1X PBS (including protease inhibitors) and store overnight at ≤ -20°C. Two freeze-thaw cycles are required to break the cell membranes. To further disrupt the cell membranes you can sonicate the samples. Centrifuge homogenates for 5 mins at 5000xg. Remove the supernatant and assay immediately or aliquot and store at -20°C or -80°C.
Tissue lysates Rinse tissue with PBS, cut into 1-2 mm pieces, and homogenize with a tissue homogenizer in PBS. Add an equal volume of RIPA buffer containing protease inhibitors and lyse tissues at room temperature for 30 minutes with gentle agitation. Centrifuge to remove debris. Quantify total protein concentration using a total protein assay. Assay immediately or aliquot and store at ≤ -20 °C.
Breast Milk Collect milk samples and centrifuge at 10,000 x g for 60 min at 4°C. Aliquot the supernatant and assay. For long term use, store samples at -80°C. Minimize freeze/thaw cycles.

*Note: Protocols are specific to each batch/lot. For the correct instructions please follow the protocol included in your kit.

Before adding to wells, equilibrate the SABC working solution and TMB substrate for at least 30 min at 37°C. When diluting samples and reagents, they must be mixed completely and evenly. It is recommended to plot a standard curve for each test.

StepProtocol
1.Set standard, test sample and control (zero) wells on the pre-coated plate respectively, and then, record their positions. It is recommended to measure each standard and sample in duplicate. Wash plate 2 times before adding standard, sample and control (zero) wells!
2.Aliquot 0.1ml standard solutions into the standard wells.
3.Add 0.1 ml of Sample / Standard dilution buffer into the control (zero) well.
4.Add 0.1 ml of properly diluted sample ( Human serum, plasma, tissue homogenates and other biological fluids.) into test sample wells.
5.Seal the plate with a cover and incubate at 37 °C for 90 min.
6.Remove the cover and discard the plate content, clap the plate on the absorbent filter papers or other absorbent material. Do NOT let the wells completely dry at any time. Wash plate X2.
7.Add 0.1 ml of Biotin- detection antibody working solution into the above wells (standard, test sample & zero wells). Add the solution at the bottom of each well without touching the side wall.
8.Seal the plate with a cover and incubate at 37°C for 60 min.
9.Remove the cover, and wash plate 3 times with Wash buffer. Let wash buffer rest in wells for 1 min between each wash.
10.Add 0.1 ml of SABC working solution into each well, cover the plate and incubate at 37°C for 30 min.
11.Remove the cover and wash plate 5 times with Wash buffer, and each time let the wash buffer stay in the wells for 1-2 min.
12.Add 90 µl of TMB substrate into each well, cover the plate and incubate at 37°C in dark within 10-20 min. (Note: This incubation time is for reference use only, the optimal time should be determined by end user.) And the shades of blue can be seen in the first 3-4 wells (with most concentrated standard solutions), the other wells show no obvious color.
13.Add 50 µl of Stop solution into each well and mix thoroughly. The color changes into yellow immediately.
14. Read the O.D. absorbance at 450 nm in a microplate reader immediately after adding the stop solution.

Related Products