null

Human EPX / Eosinophil peroxidase ELISA Kit

SKU:
HUFI02035
Product Type:
ELISA Kit
Size:
96 Assays
Uniprot:
P11678
Sensitivity:
0.938ng/ml
Range:
1.563-100ng/ml
ELISA Type:
Sandwich
Synonyms:
EPX, EPER, EPO, EPP
Reactivity:
Human
Research Area:
Signal Transduction
$719
Frequently bought together:

Description

system_update_altDatasheetsystem_update_altMSDS

Human EPX/Eosinophil peroxidase ELISA Kit

The Human EPX (Eosinophil Peroxidase) ELISA Kit is a powerful tool for accurately measuring levels of EPX in human samples such as serum, plasma, and cell culture supernatants. This kit is designed with high sensitivity and specificity to deliver dependable and consistent results, making it an indispensable tool for various research applications.EPX is an important enzyme mainly found in eosinophils, playing a key role in the immune response and inflammatory processes.

Its dysregulation has been linked to various diseases such as asthma, allergic reactions, and certain autoimmune disorders. By accurately measuring EPX levels, researchers can gain valuable insights into the underlying mechanisms of these diseases and potentially develop novel therapeutic strategies.Order your Human EPX ELISA Kit today from Assay Genie to accelerate your research and unlock new discoveries in the field of immunology and inflammatory disorders.

Product Name:Human EPX / Eosinophil peroxidase ELISA Kit
Product Code:HUFI02035
Size:96 Assays
Alias:EPX, EPER, EPO, EPP
Detection method:Sandwich ELISA, Double Antibody
Application:This immunoassay kit allows for the in vitro quantitative determination of Human EPX concentrations in serum plasma and other biological fluids.
Sensitivity:0.938ng/ml
Range:1.56-100ng/ml
Storage:4°C for 6 months
Note:For Research Use Only
Recovery:Matrices listed below were spiked with certain level of Human EPX and the recovery rates were calculated by comparing the measured value to the expected amount of Human EPX in samples.
MatrixRecovery range(%)Average(%)
serum(n=5)89-10295
EDTA plasma(n=5)86-10594
UFH plasma(n=5)85-9390
Linearity:The linearity of the kit was assayed by testing samples spiked with appropriate concentration of Human EPX and their serial dilutions. The results were demonstrated by the percentage of calculated concentration to the expected.
Sample1:21:41:8
serum(n=5)87-105%85-93%90-103%
EDTA plasma(n=5)83-99%83-101%86-97%
UFH plasma(n=5)87-97%81-100%83-100%
CV(%):Intra-Assay: CV<8%
Inter-Assay: CV<10%
ComponentQuantityStorage
ELISA Microplate (Dismountable)8×12 strips4°C for 6 months
Lyophilized Standard24°C/-20°C
Sample/Standard Dilution Buffer20ml4°C
Biotin-labeled Antibody(Concentrated)120ul4°C (Protect from light)
Antibody Dilution Buffer10ml4°C
HRP-Streptavidin Conjugate(SABC)120ul4°C (Protect from light)
SABC Dilution Buffer10ml4°C
TMB Substrate10ml4°C (Protect from light)
Stop Solution10ml4°C
Wash Buffer(25X)30ml4°C
Plate Sealer5-

Other materials and equipment required:

  • Microplate reader with 450 nm wavelength filter
  • Multichannel Pipette, Pipette, microcentrifuge tubes and disposable pipette tips
  • Incubator
  • Deionized or distilled water
  • Absorbent paper
  • Buffer resevoir
UniprotP11678
UniProt Protein Function:EPX: Mediates tyrosine nitration of secondary granule proteins in mature resting eosinophils. Shows significant inhibitory activity towards Mycobacterium tuberculosis H37Rv by inducing bacterial fragmentation and lysis. Defects in EPX are the cause of eosinophil peroxidase deficiency (EPD). EPD is an autosomal recessive defect where anomalous eosinophils are characterized by nuclear hypersegmentation, hypogranulation, and negative peroxidase and phospholipid staining. Belongs to the peroxidase family. XPO subfamily.
UniProt Protein Details:Protein type:Oxidoreductase; EC 1.11.1.7

Chromosomal Location of Human Ortholog: 17q23.1

Molecular Function:peroxidase activity; metal ion binding; heme binding

Biological Process: positive regulation of interleukin-4 production; negative regulation of interleukin-10 production; hydrogen peroxide catabolic process; negative regulation of interleukin-5 production; response to oxidative stress; defense response to nematode

Disease: Eosinophil Peroxidase Deficiency

UniProt Code:P11678
NCBI GenInfo Identifier:4503595
NCBI Gene ID:8288
NCBI Accession:
UniProt Secondary Accession:P11678,Q4TVP3,
Molecular Weight:
NCBI Full Name:eosinophil peroxidase preproprotein
NCBI Synonym Full Names:eosinophil peroxidase
NCBI Official Symbol:EPX  
NCBI Official Synonym Symbols:EPO; EPP; EPXD; EPX-PEN  
NCBI Protein Information:eosinophil peroxidase
UniProt Protein Name:Eosinophil peroxidase
Protein Family:Eosinophil peroxidase
UniProt Gene Name:EPX  
UniProt Entry Name:PERE_HUMAN

*Note: Protocols are specific to each batch/lot. For the correct instructions please follow the protocol included in your kit.

Before adding to wells, equilibrate the SABC working solution and TMB substrate for at least 30 min at 37°C. When diluting samples and reagents, they must be mixed completely and evenly. It is recommended to plot a standard curve for each test.

StepProtocol
1.Set standard, test sample and control (zero) wells on the pre-coated plate respectively, and then, record their positions. It is recommended to measure each standard and sample in duplicate. Wash plate 2 times before adding standard, sample and control (zero) wells!
2.Aliquot 0.1ml standard solutions into the standard wells.
3.Add 0.1 ml of Sample / Standard dilution buffer into the control (zero) well.
4.Add 0.1 ml of properly diluted sample ( Human serum, plasma, tissue homogenates and other biological fluids.) into test sample wells.
5.Seal the plate with a cover and incubate at 37 °C for 90 min.
6.Remove the cover and discard the plate content, clap the plate on the absorbent filter papers or other absorbent material. Do NOT let the wells completely dry at any time. Wash plate X2.
7.Add 0.1 ml of Biotin- detection antibody working solution into the above wells (standard, test sample & zero wells). Add the solution at the bottom of each well without touching the side wall.
8.Seal the plate with a cover and incubate at 37°C for 60 min.
9.Remove the cover, and wash plate 3 times with Wash buffer. Let wash buffer rest in wells for 1 min between each wash.
10.Add 0.1 ml of SABC working solution into each well, cover the plate and incubate at 37°C for 30 min.
11.Remove the cover and wash plate 5 times with Wash buffer, and each time let the wash buffer stay in the wells for 1-2 min.
12.Add 90 µl of TMB substrate into each well, cover the plate and incubate at 37°C in dark within 10-20 min. (Note: This incubation time is for reference use only, the optimal time should be determined by end user.) And the shades of blue can be seen in the first 3-4 wells (with most concentrated standard solutions), the other wells show no obvious color.
13.Add 50 µl of Stop solution into each well and mix thoroughly. The color changes into yellow immediately.
14. Read the O.D. absorbance at 450 nm in a microplate reader immediately after adding the stop solution.

When carrying out an ELISA assay it is important to prepare your samples in order to achieve the best possible results. Below we have a list of procedures for the preparation of samples for different sample types.

Sample TypeProtocol
SerumIf using serum separator tubes, allow samples to clot for 30 minutes at room temperature. Centrifuge for 10 minutes at 1,000x g. Collect the serum fraction and assay promptly or aliquot and store the samples at -80°C. Avoid multiple freeze-thaw cycles.

If serum separator tubes are not being used, allow samples to clot overnight at 2-8°C. Centrifuge for 10 minutes at 1,000x g. Remove serum and assay promptly or aliquot and store the samples at -80°C. Avoid multiple freeze-thaw cycles.

PlasmaCollect plasma using EDTA or heparin as an anticoagulant. Centrifuge samples at 4°C for 15 mins at 1000 × g within 30 mins of collection. Collect the plasma fraction and assay promptly or aliquot and store the samples at -80°C. Avoid multiple freeze-thaw cycles. Note: Over haemolysed samples are not suitable for use with this kit.
Urine & Cerebrospinal FluidCollect the urine (mid-stream) in a sterile container, centrifuge for 20 mins at 2000-3000 rpm. Remove supernatant and assay immediately. If any precipitation is detected, repeat the centrifugation step. A similar protocol can be used for cerebrospinal fluid.
Cell culture supernatantCollect the cell culture media by pipette, followed by centrifugation at 4°C for 20 mins at 1500 rpm. Collect the clear supernatant and assay immediately.
Cell lysatesSolubilize cells in lysis buffer and allow to sit on ice for 30 minutes. Centrifuge tubes at 14,000 x g for 5 minutes to remove insoluble material. Aliquot the supernatant into a new tube and discard the remaining whole cell extract. Quantify total protein concentration using a total protein assay. Assay immediately or aliquot and store at ≤ -20 °C.
Tissue homogenatesThe preparation of tissue homogenates will vary depending upon tissue type. Rinse tissue with 1X PBS to remove excess blood & homogenize in 20ml of 1X PBS (including protease inhibitors) and store overnight at ≤ -20°C. Two freeze-thaw cycles are required to break the cell membranes. To further disrupt the cell membranes you can sonicate the samples. Centrifuge homogenates for 5 mins at 5000xg. Remove the supernatant and assay immediately or aliquot and store at -20°C or -80°C.
Tissue lysatesRinse tissue with PBS, cut into 1-2 mm pieces, and homogenize with a tissue homogenizer in PBS. Add an equal volume of RIPA buffer containing protease inhibitors and lyse tissues at room temperature for 30 minutes with gentle agitation. Centrifuge to remove debris. Quantify total protein concentration using a total protein assay. Assay immediately or aliquot and store at ≤ -20 °C.
Breast MilkCollect milk samples and centrifuge at 10,000 x g for 60 min at 4°C. Aliquot the supernatant and assay. For long term use, store samples at -80°C. Minimize freeze/thaw cycles.

Related Products