null

Human EDG7 / LPAR3 ELISA Kit

SKU:
HUFI00852
Product Type:
ELISA Kit
Size:
96 Assays
Uniprot:
Q9UBY5
Sensitivity:
0.469ng/ml
Range:
0.781-50ng/ml
ELISA Type:
Sandwich
Synonyms:
LPAR3, EDG7, Lysophosphatidic acid receptor 3, Edg-7, GPCR, HOFNH30, LPA-3, LPA3, LPA receptor 3, lysophosphatidic acid G-protein-coupled receptor7, LPA receptor EDG7, Lysophosphatidic acid receptor Edg-7
Reactivity:
Human
Research Area:
Cell Biology
$719
Frequently bought together:

Description

system_update_altDatasheetsystem_update_altMSDS

Human EDG7/LPAR3 ELISA Kit

The Human EDG7 (Lysophosphatidic acid receptor 3) ELISA Kit is specifically designed for the precise measurement of EDG7 levels in human samples such as serum, plasma, and cell culture supernatants. With its high sensitivity and specificity, this kit ensures accurate and reproducible results, making it an ideal tool for a variety of research applications.EDG7, also known as Lysophosphatidic acid receptor 3, plays a crucial role in cell signaling and has been implicated in various cellular processes such as cell proliferation, migration, and survival.

Dysregulation of EDG7 has been associated with diseases such as cancer, inflammation, and fibrosis, making it a valuable biomarker for studying these conditions and potential therapeutic targets.Overall, the Human EDG7 ELISA Kit offers researchers a reliable and efficient tool for studying the role of EDG7 in health and disease, leading to new insights and potential treatment strategies.

Product Name:Human EDG7 / LPAR3 ELISA Kit
Product Code:HUFI00852
Size:96 Assays
Alias:LPAR3, EDG7, Lysophosphatidic acid receptor 3, Edg-7, GPCR, HOFNH30, LPA-3, LPA3, LPA receptor 3, lysophosphatidic acid G-protein-coupled receptor7, LPA receptor EDG7, Lysophosphatidic acid receptor Edg-7
Detection method:Sandwich ELISA, Double Antibody
Application:This immunoassay kit allows for the in vitro quantitative determination of Human LPAR3 concentrations in serum plasma and other biological fluids.
Sensitivity:0.469ng/ml
Range:0.781-50ng/ml
Storage:4°C for 6 months
Note:For Research Use Only
Recovery:Matrices listed below were spiked with certain level of Human LPAR3 and the recovery rates were calculated by comparing the measured value to the expected amount of Human LPAR3 in samples.
MatrixRecovery range(%)Average(%)
serum(n=5)88-10197
EDTA plasma(n=5)89-10295
UFH plasma(n=5)86-10194
Linearity:The linearity of the kit was assayed by testing samples spiked with appropriate concentration of Human LPAR3 and their serial dilutions. The results were demonstrated by the percentage of calculated concentration to the expected.
Sample1:21:41:8
serum(n=5)86-104%86-102%95-102%
EDTA plasma(n=5)83-98%84-99%85-99%
UFH plasma(n=5)87-100%80-100%80-94%
CV(%):Intra-Assay: CV<8%
Inter-Assay: CV<10%
ComponentQuantityStorage
ELISA Microplate (Dismountable)8×12 strips4°C for 6 months
Lyophilized Standard24°C/-20°C
Sample/Standard Dilution Buffer20ml4°C
Biotin-labeled Antibody(Concentrated)120ul4°C (Protect from light)
Antibody Dilution Buffer10ml4°C
HRP-Streptavidin Conjugate(SABC)120ul4°C (Protect from light)
SABC Dilution Buffer10ml4°C
TMB Substrate10ml4°C (Protect from light)
Stop Solution10ml4°C
Wash Buffer(25X)30ml4°C
Plate Sealer5-

Other materials and equipment required:

  • Microplate reader with 450 nm wavelength filter
  • Multichannel Pipette, Pipette, microcentrifuge tubes and disposable pipette tips
  • Incubator
  • Deionized or distilled water
  • Absorbent paper
  • Buffer resevoir
UniprotQ9UBY5
UniProt Protein Function:EDG7: Receptor for lysophosphatidic acid (LPA), a mediator of diverse cellular activities. May play a role in the development of ovarian cancer. Seems to be coupled to the G(i)/G(o) and G(q) families of heteromeric G proteins. Belongs to the G-protein coupled receptor 1 family.
UniProt Protein Details:Protein type:GPCR, family 1; Receptor, GPCR; Membrane protein, integral; Motility/polarity/chemotaxis; Membrane protein, multi-pass

Chromosomal Location of Human Ortholog: 1p22.3

Cellular Component: integral to plasma membrane; axon; plasma membrane

Molecular Function:G-protein coupled receptor activity; G-protein alpha-subunit binding; phospholipid binding; lipid binding

Biological Process: synaptic transmission; G-protein signaling, coupled to cyclic nucleotide second messenger; elevation of cytosolic calcium ion concentration; elevation of cytosolic calcium ion concentration during G-protein signaling, coupled to IP3 second messenger (phospholipase C activating); activation of MAPK activity; bleb formation; positive regulation of calcium ion transport; positive regulation of collateral sprouting

NCBI Summary:This gene encodes a member of the G protein-coupled receptor family, as well as the EDG family of proteins. This protein functions as a cellular receptor for lysophosphatidic acid and mediates lysophosphatidic acid-evoked calcium mobilization. This receptor couples predominantly to G(q/11) alpha proteins. [provided by RefSeq, Jul 2008]
UniProt Code:Q9UBY5
NCBI GenInfo Identifier:26393418
NCBI Gene ID:23566
NCBI Accession:Q9UBY5.1
UniProt Secondary Accession:Q9UBY5,A0AVA3,
UniProt Related Accession:Q9UBY5
Molecular Weight:40,128 Da
NCBI Full Name:Lysophosphatidic acid receptor 3
NCBI Synonym Full Names:lysophosphatidic acid receptor 3
NCBI Official Symbol:LPAR3  
NCBI Official Synonym Symbols:EDG7; GPCR; LPA3; Edg-7; LP-A3; HOFNH30; RP4-678I3  
NCBI Protein Information:lysophosphatidic acid receptor 3; LPA receptor 3; LPA receptor EDG7; LPA-3; calcium-mobilizing lysophosphatidic acid receptor LP-A3; endothelial cell differentiation gene 7; endothelial differentiation, lysophosphatidic acid G-protein-coupled receptor, 7; lysophosphatidic acid receptor Edg-7
UniProt Protein Name:Lysophosphatidic acid receptor 3
UniProt Synonym Protein Names:Lysophosphatidic acid receptor Edg-7
Protein Family:Lysophosphatidic acid receptor
UniProt Gene Name:LPAR3  
UniProt Entry Name:LPAR3_HUMAN

*Note: Protocols are specific to each batch/lot. For the correct instructions please follow the protocol included in your kit.

Before adding to wells, equilibrate the SABC working solution and TMB substrate for at least 30 min at 37°C. When diluting samples and reagents, they must be mixed completely and evenly. It is recommended to plot a standard curve for each test.

StepProtocol
1.Set standard, test sample and control (zero) wells on the pre-coated plate respectively, and then, record their positions. It is recommended to measure each standard and sample in duplicate. Wash plate 2 times before adding standard, sample and control (zero) wells!
2.Aliquot 0.1ml standard solutions into the standard wells.
3.Add 0.1 ml of Sample / Standard dilution buffer into the control (zero) well.
4.Add 0.1 ml of properly diluted sample ( Human serum, plasma, tissue homogenates and other biological fluids.) into test sample wells.
5.Seal the plate with a cover and incubate at 37 °C for 90 min.
6.Remove the cover and discard the plate content, clap the plate on the absorbent filter papers or other absorbent material. Do NOT let the wells completely dry at any time. Wash plate X2.
7.Add 0.1 ml of Biotin- detection antibody working solution into the above wells (standard, test sample & zero wells). Add the solution at the bottom of each well without touching the side wall.
8.Seal the plate with a cover and incubate at 37°C for 60 min.
9.Remove the cover, and wash plate 3 times with Wash buffer. Let wash buffer rest in wells for 1 min between each wash.
10.Add 0.1 ml of SABC working solution into each well, cover the plate and incubate at 37°C for 30 min.
11.Remove the cover and wash plate 5 times with Wash buffer, and each time let the wash buffer stay in the wells for 1-2 min.
12.Add 90 µl of TMB substrate into each well, cover the plate and incubate at 37°C in dark within 10-20 min. (Note: This incubation time is for reference use only, the optimal time should be determined by end user.) And the shades of blue can be seen in the first 3-4 wells (with most concentrated standard solutions), the other wells show no obvious color.
13.Add 50 µl of Stop solution into each well and mix thoroughly. The color changes into yellow immediately.
14. Read the O.D. absorbance at 450 nm in a microplate reader immediately after adding the stop solution.

When carrying out an ELISA assay it is important to prepare your samples in order to achieve the best possible results. Below we have a list of procedures for the preparation of samples for different sample types.

Sample TypeProtocol
SerumIf using serum separator tubes, allow samples to clot for 30 minutes at room temperature. Centrifuge for 10 minutes at 1,000x g. Collect the serum fraction and assay promptly or aliquot and store the samples at -80°C. Avoid multiple freeze-thaw cycles.

If serum separator tubes are not being used, allow samples to clot overnight at 2-8°C. Centrifuge for 10 minutes at 1,000x g. Remove serum and assay promptly or aliquot and store the samples at -80°C. Avoid multiple freeze-thaw cycles.

PlasmaCollect plasma using EDTA or heparin as an anticoagulant. Centrifuge samples at 4°C for 15 mins at 1000 × g within 30 mins of collection. Collect the plasma fraction and assay promptly or aliquot and store the samples at -80°C. Avoid multiple freeze-thaw cycles. Note: Over haemolysed samples are not suitable for use with this kit.
Urine & Cerebrospinal FluidCollect the urine (mid-stream) in a sterile container, centrifuge for 20 mins at 2000-3000 rpm. Remove supernatant and assay immediately. If any precipitation is detected, repeat the centrifugation step. A similar protocol can be used for cerebrospinal fluid.
Cell culture supernatantCollect the cell culture media by pipette, followed by centrifugation at 4°C for 20 mins at 1500 rpm. Collect the clear supernatant and assay immediately.
Cell lysatesSolubilize cells in lysis buffer and allow to sit on ice for 30 minutes. Centrifuge tubes at 14,000 x g for 5 minutes to remove insoluble material. Aliquot the supernatant into a new tube and discard the remaining whole cell extract. Quantify total protein concentration using a total protein assay. Assay immediately or aliquot and store at ≤ -20 °C.
Tissue homogenatesThe preparation of tissue homogenates will vary depending upon tissue type. Rinse tissue with 1X PBS to remove excess blood & homogenize in 20ml of 1X PBS (including protease inhibitors) and store overnight at ≤ -20°C. Two freeze-thaw cycles are required to break the cell membranes. To further disrupt the cell membranes you can sonicate the samples. Centrifuge homogenates for 5 mins at 5000xg. Remove the supernatant and assay immediately or aliquot and store at -20°C or -80°C.
Tissue lysatesRinse tissue with PBS, cut into 1-2 mm pieces, and homogenize with a tissue homogenizer in PBS. Add an equal volume of RIPA buffer containing protease inhibitors and lyse tissues at room temperature for 30 minutes with gentle agitation. Centrifuge to remove debris. Quantify total protein concentration using a total protein assay. Assay immediately or aliquot and store at ≤ -20 °C.
Breast MilkCollect milk samples and centrifuge at 10,000 x g for 60 min at 4°C. Aliquot the supernatant and assay. For long term use, store samples at -80°C. Minimize freeze/thaw cycles.

Related Products