null

Human DVL1 / Segment polarity dishevelled homolog DVL-1 ELISA Kit

SKU:
HUFI01470
Product Type:
ELISA Kit
Size:
96 Assays
Uniprot:
O14640
Sensitivity:
0.094ng/ml
Range:
0.156-10ng/ml
ELISA Type:
Sandwich
Synonyms:
DVL1, Segment polarity protein dishevelled homolog DVL-1, Dishevelled-1, DSH homolog 1, DVL, dishevelled, dsh homolog 1, Drosophila, dishevelled 1, homologous to Drosophila dsh,
Reactivity:
Human
Research Area:
Metabolism
$719
Frequently bought together:

Description

Human DVL1/Segment polarity dishevelled homolog DVL-1 ELISA Kit

The Human DVL1 (Segment Polarity Dishevelled Homolog DVL-1) ELISA Kit is a powerful tool for the precise measurement of DVL1 levels in human samples including serum, plasma, and cell culture supernatants. This kit boasts exceptional sensitivity and specificity, guaranteeing accurate and reproducible results for a diverse range of research applications.DVL1 is a vital component of the Wnt signaling pathway, regulating cell polarity and development. Dysregulation of DVL1 has been implicated in various diseases including cancer, neurodevelopmental disorders, and cardiovascular conditions, highlighting its significance as a potential biomarker for disease diagnosis and therapeutic development.

Don't miss out on the opportunity to advance your research with the Human DVL1 ELISA Kit, a reliable and efficient tool for the detection and quantification of DVL1 levels in human samples. Order yours today from Assay Genie and unlock the potential of your research endeavors.

Product Name:Human DVL1 / Segment polarity dishevelled homolog DVL-1 ELISA Kit
Product Code:HUFI01470
Size:96 Assays
Alias:DVL1, Segment polarity protein dishevelled homolog DVL-1, Dishevelled-1, DSH homolog 1, DVL, dishevelled, dsh homolog 1, Drosophila, dishevelled 1, homologous to Drosophila dsh
Detection method:Sandwich ELISA, Double Antibody
Application:This immunoassay kit allows for the in vitro quantitative determination of Human DVL1 concentrations in serum plasma and other biological fluids.
Sensitivity:0.094ng/ml
Range:0.156-10ng/ml
Storage:4°C for 6 months
Note:For Research Use Only
Recovery:Matrices listed below were spiked with certain level of Human DVL1 and the recovery rates were calculated by comparing the measured value to the expected amount of Human DVL1 in samples.
MatrixRecovery range(%)Average(%)
serum(n=5)85-10192
EDTA plasma(n=5)90-9793
UFH plasma(n=5)90-9995
Linearity:The linearity of the kit was assayed by testing samples spiked with appropriate concentration of Human DVL1 and their serial dilutions. The results were demonstrated by the percentage of calculated concentration to the expected.
Sample1:21:41:8
serum(n=5)90-104%87-98%87-104%
EDTA plasma(n=5)88-100%88-92%82-97%
UFH plasma(n=5)83-98%80-94%81-90%
CV(%):Intra-Assay: CV<8%
Inter-Assay: CV<10%
ComponentQuantityStorage
ELISA Microplate (Dismountable)8×12 strips4°C for 6 months
Lyophilized Standard24°C/-20°C
Sample/Standard Dilution Buffer20ml4°C
Biotin-labeled Antibody(Concentrated)120ul4°C (Protect from light)
Antibody Dilution Buffer10ml4°C
HRP-Streptavidin Conjugate(SABC)120ul4°C (Protect from light)
SABC Dilution Buffer10ml4°C
TMB Substrate10ml4°C (Protect from light)
Stop Solution10ml4°C
Wash Buffer(25X)30ml4°C
Plate Sealer5-

Other materials and equipment required:

  • Microplate reader with 450 nm wavelength filter
  • Multichannel Pipette, Pipette, microcentrifuge tubes and disposable pipette tips
  • Incubator
  • Deionized or distilled water
  • Absorbent paper
  • Buffer resevoir
UniprotO14640
UniProt Protein Function:DVL1: Participates in Wnt signaling by binding to the cytoplasmic C-terminus of frizzled family members and transducing the Wnt signal to down-stream effectors. Plays a role both in canonical and non-canonical Wnt signaling. Plays a role in the signal transduction pathways mediated by multiple Wnt genes. Required for LEF1 activation upon WNT1 and WNT3A signaling. DVL1 and PAK1 form a ternary complex with MUSK which is important for MUSK-dependent regulation of AChR clustering during the formation of the neuromuscular junction (NMJ). Belongs to the DSH family. 2 isoforms of the human protein are produced by alternative splicing.
UniProt Protein Details:Protein type:Inhibitor

Chromosomal Location of Human Ortholog: 1p36

Cellular Component: cytoplasmic membrane-bound vesicle; cytoplasmic vesicle; cytosol; growth cone; lateral plasma membrane; neuron projection; synapse

Molecular Function:enzyme binding; frizzled binding; identical protein binding; protein binding; protein kinase binding

Biological Process: dendrite morphogenesis; negative regulation of protein binding; negative regulation of protein kinase activity; neural tube development; neuromuscular junction development; neurotransmitter secretion; positive regulation of proteasomal ubiquitin-dependent protein catabolic process; positive regulation of transcription, DNA-dependent; positive regulation of Wnt receptor signaling pathway; protein stabilization; receptor clustering; regulation of neurotransmitter levels; synapse organization and biogenesis; synaptogenesis; transcription from RNA polymerase II promoter; Wnt receptor signaling pathway through beta-catenin; Wnt receptor signaling pathway, planar cell polarity pathway

Disease: Robinow Syndrome, Autosomal Dominant; Robinow Syndrome, Autosomal Dominant 2

NCBI Summary:DVL1, the human homolog of the Drosophila dishevelled gene (dsh) encodes a cytoplasmic phosphoprotein that regulates cell proliferation, acting as a transducer molecule for developmental processes, including segmentation and neuroblast specification. DVL1 is a candidate gene for neuroblastomatous transformation. The Schwartz-Jampel syndrome and Charcot-Marie-Tooth disease type 2A have been mapped to the same region as DVL1. The phenotypes of these diseases may be consistent with defects which might be expected from aberrant expression of a DVL gene during development. [provided by RefSeq, Jul 2008]
UniProt Code:O14640
NCBI GenInfo Identifier:145559469
NCBI Gene ID:1855
NCBI Accession:O14640.2
UniProt Secondary Accession:O14640,Q5TA33, Q5TA35,
UniProt Related Accession:P54792,O14640
Molecular Weight:72,881 Da
NCBI Full Name:Segment polarity protein dishevelled homolog DVL-1
NCBI Synonym Full Names:dishevelled segment polarity protein 1
NCBI Official Symbol:DVL1
NCBI Official Synonym Symbols:DVL; DRS2; DVL1L1; DVL1P1
NCBI Protein Information:segment polarity protein dishevelled homolog DVL-1
UniProt Protein Name:Segment polarity protein dishevelled homolog DVL-1
UniProt Synonym Protein Names:DSH homolog 1
Protein Family:Segment polarity protein dishevelled
UniProt Gene Name:DVL1
UniProt Entry Name:DVL1_HUMAN

*Note: Protocols are specific to each batch/lot. For the correct instructions please follow the protocol included in your kit.

Before adding to wells, equilibrate the SABC working solution and TMB substrate for at least 30 min at 37°C. When diluting samples and reagents, they must be mixed completely and evenly. It is recommended to plot a standard curve for each test.

StepProtocol
1.Set standard, test sample and control (zero) wells on the pre-coated plate respectively, and then, record their positions. It is recommended to measure each standard and sample in duplicate. Wash plate 2 times before adding standard, sample and control (zero) wells!
2.Aliquot 0.1ml standard solutions into the standard wells.
3.Add 0.1 ml of Sample / Standard dilution buffer into the control (zero) well.
4.Add 0.1 ml of properly diluted sample ( Human serum, plasma, tissue homogenates and other biological fluids.) into test sample wells.
5.Seal the plate with a cover and incubate at 37 °C for 90 min.
6.Remove the cover and discard the plate content, clap the plate on the absorbent filter papers or other absorbent material. Do NOT let the wells completely dry at any time. Wash plate X2.
7.Add 0.1 ml of Biotin- detection antibody working solution into the above wells (standard, test sample & zero wells). Add the solution at the bottom of each well without touching the side wall.
8.Seal the plate with a cover and incubate at 37°C for 60 min.
9.Remove the cover, and wash plate 3 times with Wash buffer. Let wash buffer rest in wells for 1 min between each wash.
10.Add 0.1 ml of SABC working solution into each well, cover the plate and incubate at 37°C for 30 min.
11.Remove the cover and wash plate 5 times with Wash buffer, and each time let the wash buffer stay in the wells for 1-2 min.
12.Add 90 µl of TMB substrate into each well, cover the plate and incubate at 37°C in dark within 10-20 min. (Note: This incubation time is for reference use only, the optimal time should be determined by end user.) And the shades of blue can be seen in the first 3-4 wells (with most concentrated standard solutions), the other wells show no obvious color.
13.Add 50 µl of Stop solution into each well and mix thoroughly. The color changes into yellow immediately.
14. Read the O.D. absorbance at 450 nm in a microplate reader immediately after adding the stop solution.

When carrying out an ELISA assay it is important to prepare your samples in order to achieve the best possible results. Below we have a list of procedures for the preparation of samples for different sample types.

Sample TypeProtocol
SerumIf using serum separator tubes, allow samples to clot for 30 minutes at room temperature. Centrifuge for 10 minutes at 1,000x g. Collect the serum fraction and assay promptly or aliquot and store the samples at -80°C. Avoid multiple freeze-thaw cycles.

If serum separator tubes are not being used, allow samples to clot overnight at 2-8°C. Centrifuge for 10 minutes at 1,000x g. Remove serum and assay promptly or aliquot and store the samples at -80°C. Avoid multiple freeze-thaw cycles.

PlasmaCollect plasma using EDTA or heparin as an anticoagulant. Centrifuge samples at 4°C for 15 mins at 1000 × g within 30 mins of collection. Collect the plasma fraction and assay promptly or aliquot and store the samples at -80°C. Avoid multiple freeze-thaw cycles. Note: Over haemolysed samples are not suitable for use with this kit.
Urine & Cerebrospinal FluidCollect the urine (mid-stream) in a sterile container, centrifuge for 20 mins at 2000-3000 rpm. Remove supernatant and assay immediately. If any precipitation is detected, repeat the centrifugation step. A similar protocol can be used for cerebrospinal fluid.
Cell culture supernatantCollect the cell culture media by pipette, followed by centrifugation at 4°C for 20 mins at 1500 rpm. Collect the clear supernatant and assay immediately.
Cell lysatesSolubilize cells in lysis buffer and allow to sit on ice for 30 minutes. Centrifuge tubes at 14,000 x g for 5 minutes to remove insoluble material. Aliquot the supernatant into a new tube and discard the remaining whole cell extract. Quantify total protein concentration using a total protein assay. Assay immediately or aliquot and store at ≤ -20 °C.
Tissue homogenatesThe preparation of tissue homogenates will vary depending upon tissue type. Rinse tissue with 1X PBS to remove excess blood & homogenize in 20ml of 1X PBS (including protease inhibitors) and store overnight at ≤ -20°C. Two freeze-thaw cycles are required to break the cell membranes. To further disrupt the cell membranes you can sonicate the samples. Centrifuge homogenates for 5 mins at 5000xg. Remove the supernatant and assay immediately or aliquot and store at -20°C or -80°C.
Tissue lysatesRinse tissue with PBS, cut into 1-2 mm pieces, and homogenize with a tissue homogenizer in PBS. Add an equal volume of RIPA buffer containing protease inhibitors and lyse tissues at room temperature for 30 minutes with gentle agitation. Centrifuge to remove debris. Quantify total protein concentration using a total protein assay. Assay immediately or aliquot and store at ≤ -20 °C.
Breast MilkCollect milk samples and centrifuge at 10,000 x g for 60 min at 4°C. Aliquot the supernatant and assay. For long term use, store samples at -80°C. Minimize freeze/thaw cycles.

Related Products