null

Human CPN10 (Chaperonin 10) ELISA Kit (HUES01848)

SKU:
HUES01848
Product Type:
ELISA Kit
Size:
96 Assays
Uniprot:
P61604
Sensitivity:
75pg/mL
Range:
125-8000pg/mL
ELISA Type:
Sandwich
Reactivity:
Human
Sample Type:
Serum, plasma and other biological fluids
Research Area:
Metabolism
$719
Frequently bought together:

Description

system_update_altDatasheetsystem_update_altMSDS

Human CPN10 (Chaperonin 10) ELISA Kit

The Human CPN10 (Chaperonin-10) ELISA Kit is specifically designed for the accurate quantification of CPN10 levels in human samples including serum, plasma, and cell culture supernatants. This kit offers high sensitivity and specificity, ensuring precise and consistent results for a variety of research purposes.CPN10, also known as Chaperonin-10, is a critical molecular chaperone involved in protein folding and cellular stress response. It plays a crucial role in maintaining protein homeostasis and protecting cells from damage.

Dysregulation of CPN10 has been linked to various diseases and disorders, highlighting its importance as a potential biomarker for disease diagnosis and monitoring.With the Human CPN10 ELISA Kit, researchers can accurately measure CPN10 levels in biological samples, enabling detailed investigations into the role of CPN10 in physiological and pathological processes. This kit is an essential tool for studying molecular chaperones, cellular stress responses, and their implications in health and disease.

Assay type:Sandwich
Format:96T
Assay time:4.5h
Reactivity:Human
Detection Method:Colormetric
Detection Range:0.16-10 ng/mL
Sensitivity:0.10 ng/mL
Sample Volume Required Per Well:100µL
Sample Type:Serum, plasma and other biological fluids
Specificity:This kit recognizes Human CPN10 in samples. No significant cross-reactivity or interference between Human CPN10 and analogues was observed.

This ELISA kit uses Sandwich-ELISA as the method. The micro ELISA plate provided in this kit has been pre-coated with an antibody specific to Human CPN10. Standards or samples are added to the appropriate micro ELISA plate wells and combined with the specific antibody. Then a biotinylated detection antibody specific for Human CPN10 and Avidin-Horseradish Peroxidase (HRP) conjugate are added to each micro plate well successively and incubated. Free components are washed away. The substrate solution is added to each well. Only those wells that contain Human CPN10, biotinylated detection antibody and Avidin-HRP conjugate will appear blue in color. The enzyme-substrate reaction is terminated by adding Stop Solution and the color turns yellow. The optical density (OD) is measured spectrophotometrically at a wavelength of 450 nm ± 2 nm. The OD value is proportional to the concentration of Human CPN10. The concentration of Human CPN10 in samples can be calculated by comparing the OD of the samples to the standard curve.

UniProt Protein Function:HSPE1: Eukaryotic CPN10 homolog which is essential for mitochondrial protein biogenesis, together with CPN60. Binds to CPN60 in the presence of Mg-ATP and suppresses the ATPase activity of the latter. Belongs to the GroES chaperonin family.
UniProt Protein Details:

Protein type:Mitochondrial

Chromosomal Location of Human Ortholog: 2q33. 1

Cellular Component: membrane; mitochondrial matrix; mitochondrion

Molecular Function:ATP binding; chaperone binding; protein binding; unfolded protein binding

Biological Process: caspase activation; osteoblast differentiation; protein folding; response to unfolded protein

NCBI Summary:This gene encodes a major heat shock protein which functions as a chaperonin. Its structure consists of a heptameric ring which binds to another heat shock protein in order to form a symmetric, functional heterodimer which enhances protein folding in an ATP-dependent manner. This gene and its co-chaperonin, HSPD1, are arranged in a head-to-head orientation on chromosome 2. Naturally occurring read-through transcription occurs between this locus and the neighboring locus MOBKL3. [provided by RefSeq, Feb 2011]
UniProt Code:P61604
NCBI GenInfo Identifier:47606335
NCBI Gene ID:3336
NCBI Accession:P61604. 2
UniProt Secondary Accession:P61604,O95421, Q04984, Q53X54, Q9UDH0,
UniProt Related Accession:P61604
Molecular Weight:10,932 Da
NCBI Full Name:10 kDa heat shock protein, mitochondrial
NCBI Synonym Full Names:heat shock protein family E (Hsp10) member 1
NCBI Official Symbol:HSPE1
NCBI Official Synonym Symbols:EPF; CPN10; GROES; HSP10
NCBI Protein Information:10 kDa heat shock protein, mitochondrial
UniProt Protein Name:10 kDa heat shock protein, mitochondrial
UniProt Synonym Protein Names:10 kDa chaperonin; Chaperonin 10; CPN10; Early-pregnancy factor; EPF
UniProt Gene Name:HSPE1
UniProt Entry Name:CH10_HUMAN

As the OD values of the standard curve may vary according to the conditions of the actual assay performance (e. g. operator, pipetting technique, washing technique or temperature effects), the operator should establish a standard curve for each test. Typical standard curve and data is provided below for reference only.

Concentration
(ng/mL)		O.DAverageCorrected
102.478
2.49		2.4842.43
51.6
1.652		1.6261.572
2.50.908
0.902		0.9050.851
1.250.442
0.45		0.4460.392
0.630.238
0.22		0.2290.175
0.310.163
0.141		0.1520.098
0.160.1
0.112		0.1060.052
00.051
0.057		0.054--

Precision

Intra-assay Precision (Precision within an assay): 3 samples with low, mid range and high level Human CPN10 were tested 20 times on one plate, respectively.

Inter-assay Precision (Precision between assays): 3 samples with low, mid range and high level Human CPN10 were tested on 3 different plates, 20 replicates in each plate.

Intra-assay PrecisionInter-assay Precision
Sample123123
n202020202020
Mean (ng/mL)0.501.204.800.501.204.70
Standard deviation0.030.060.190.030.060.19
C V (%)6.005.003.966.005.004.04

Recovery

The recovery of Human CPN10 spiked at three different levels in samples throughout the range of the assay was evaluated in various matrices.

Sample TypeRange (%)Average Recovery (%)
Serum (n=5)95-110100
EDTA plasma (n=5)86-10094
Cell culture media (n=5)88-10395

Linearity

Samples were spiked with high concentrations of Human CPN10 and diluted with Reference Standard & Sample Diluent to produce samples with values within the range of the assay.

Serum (n=5)EDTA plasma (n=5)Cell culture media (n=5)
1:2Range (%)89-10292-10286-99
Average (%)949793
1:4Range (%)101-11582-9490-105
Average (%)1078897
1:8Range (%)94-10784-9593-107
Average (%)10190100
1:16Range (%)96-11085-9695-113
Average (%)10291103

An unopened kit can be stored at 4°C for 1 month. If the kit is not used within 1 month, store the items separately according to the following conditions once the kit is received.

Item Specifications Storage
Micro ELISA Plate(Dismountable) 8 wells ×12 strips -20°C, 6 months
Reference Standard 2 vials
Concentrated Biotinylated Detection Ab (100×) 1 vial, 120 µL
Concentrated HRP Conjugate (100×) 1 vial, 120 µL -20°C(shading light), 6 months
Reference Standard & Sample Diluent 1 vial, 20 mL 4°C, 6 months
Biotinylated Detection Ab Diluent 1 vial, 14 mL
HRP Conjugate Diluent 1 vial, 14 mL
Concentrated Wash Buffer (25×) 1 vial, 30 mL
Substrate Reagent 1 vial, 10 mL 4°C(shading light)
Stop Solution 1 vial, 10 mL 4°C
Plate Sealer 5 pieces
Product Description 1 copy
Certificate of Analysis 1 copy
  1. Set standard, test sample and control (zero) wells on the pre-coated plate and record theirpositions. It is recommended to measure each standard and sample in duplicate. Note: addall solutions to the bottom of the plate wells while avoiding contact with the well walls. Ensuresolutions do not foam when adding to the wells.
  2. Aliquot 100 µL of standard solutions into the standard wells.
  3. Add 100 µL of Sample / Standard dilution buffer into the control (zero) well.
  4. Add 100 µL of properly diluted sample (serum, plasma, tissue homogenates and otherbiological fluids) into test sample wells.
  5. Cover the plate with the sealer provided in the kit and incubate for 90 min at 37 °C.
  6. Aspirate the liquid from each well, do not wash. Immediately add 100 µL of BiotinylatedDetection Ab working solution to each well. Cover the plate with a plate seal and gently mix. Incubate for 1 hour at 37 °C.
  7. Aspirate or decant the solution from the plate and add 350 µL of wash buffer to each welland incubate for 1-2 minutes at room temperature. Aspirate the solution from each well andclap the plate on absorbent filter paper to dry. Repeat this process 3 times. Note: a microplatewasher can be used in this step and other wash steps.
  8. Add 100 µL of HRP Conjugate working solution to each well. Cover with a plate seal andincubate for 30 min at 37 °C.
  9. Aspirate or decant the solution from each well. Repeat the wash process for five times asconducted in step 7.
  10. Add 90 µL of Substrate Reagent to each well. Cover with a new plate seal and incubate forapproximately 15 min at 37 °C. Protect the plate from light. Note: the reaction time can beshortened or extended according to the actual color change, but not by more than 30min.
  11. Add 50 µL of Stop Solution to each well. Note: Adding the stop solution should be done inthe same order as the substrate solution.
  12. Determine the optical density (OD value) of each well immediately with a microplate readerset at 450 nm.

Related Products