null

Human COL15A1 ELISA Kit

SKU:
HUFI00387
Product Type:
ELISA Kit
Size:
96 Assays
Uniprot:
P39059
Sensitivity:
0.094ng/ml
Range:
0.156-10ng/ml
ELISA Type:
Sandwich
Synonyms:
COL15A1, Collagen alpha-1 XV
Reactivity:
Human
Research Area:
Cardiovascular
$719
Frequently bought together:

Description

system_update_altDatasheetsystem_update_altMSDS

Human COL15A1 ELISA Kit

The Human COL15A1 ELISA Kit is a powerful tool for the precise measurement of COL15A1 levels in human samples including serum, plasma, and cell culture supernatants. This kit offers exceptional sensitivity and specificity, guaranteeing accurate and consistent results for various research purposes.COL15A1 is an important component of the extracellular matrix, playing a critical role in maintaining tissue structure and integrity. Abnormal levels of COL15A1 have been associated with various diseases, including cancer, fibrosis, and connective tissue disorders, making it a valuable biomarker for studying these conditions and developing targeted therapies.

With its reliable performance and broad applicability, the Human COL15A1 ELISA Kit is an essential tool for researchers investigating the role of COL15A1 in health and disease. Order yours today and take your research to the next level.

Product Name:Human COL15A1 ELISA Kit
Product Code:HUFI00387
Size:96 Assays
Alias:COL15A1, Collagen alpha-1 XV
Detection method:Sandwich ELISA, Double Antibody
Application:This immunoassay kit allows for the in vitro quantitative determination of Human COL15A1 concentrations in serum plasma and other biological fluids.
Sensitivity:0.094ng/ml
Range:0.156-10ng/ml
Storage:4°C for 6 months
Note:For Research Use Only
Recovery:Matrices listed below were spiked with certain level of Human COL15A1 and the recovery rates were calculated by comparing the measured value to the expected amount of Human COL15A1 in samples.
MatrixRecovery range(%)Average(%)
serum(n=5)86-10596
EDTA plasma(n=5)86-10194
UFH plasma(n=5)94-10296
Linearity:The linearity of the kit was assayed by testing samples spiked with appropriate concentration of Human COL15A1 and their serial dilutions. The results were demonstrated by the percentage of calculated concentration to the expected.
Sample1:21:41:8
serum(n=5)85-103%91-100%87-104%
EDTA plasma(n=5)85-101%82-99%86-101%
UFH plasma(n=5)85-94%85-90%86-98%
CV(%):Intra-Assay: CV<8%
Inter-Assay: CV<10%
ComponentQuantityStorage
ELISA Microplate (Dismountable)8×12 strips4°C for 6 months
Lyophilized Standard24°C/-20°C
Sample/Standard Dilution Buffer20ml4°C
Biotin-labeled Antibody(Concentrated)120ul4°C (Protect from light)
Antibody Dilution Buffer10ml4°C
HRP-Streptavidin Conjugate(SABC)120ul4°C (Protect from light)
SABC Dilution Buffer10ml4°C
TMB Substrate10ml4°C (Protect from light)
Stop Solution10ml4°C
Wash Buffer(25X)30ml4°C
Plate Sealer5-

Other materials and equipment required:

  • Microplate reader with 450 nm wavelength filter
  • Multichannel Pipette, Pipette, microcentrifuge tubes and disposable pipette tips
  • Incubator
  • Deionized or distilled water
  • Absorbent paper
  • Buffer resevoir
UniprotP39059
UniProt Protein Function:COL15A1: Structural protein that stabilizes microvessels and muscle cells, both in heart and in skeletal muscle. Belongs to the multiplexin collagen family.
UniProt Protein Details:Protein type:Secreted; Extracellular matrix; Secreted, signal peptide

Chromosomal Location of Human Ortholog: 9q21-q22

Cellular Component: extracellular matrix; extracellular space; endoplasmic reticulum lumen; collagen type XV; integral to membrane; extracellular region

Molecular Function:extracellular matrix structural constituent

Biological Process: collagen catabolic process; extracellular matrix disassembly; extracellular matrix organization and biogenesis; angiogenesis; signal transduction; cell differentiation; cell adhesion

NCBI Summary:This gene encodes the alpha chain of type XV collagen, a member of the FACIT collagen family (fibril-associated collagens with interrupted helices). Type XV collagen has a wide tissue distribution but the strongest expression is localized to basement membrane zones so it may function to adhere basement membranes to underlying connective tissue stroma. The proteolytically produced C-terminal fragment of type XV collagen is restin, a potentially antiangiogenic protein that is closely related to endostatin. Mouse studies have shown that collagen XV deficiency is associated with muscle and microvessel deterioration. [provided by RefSeq, May 2013]
UniProt Code:P39059
NCBI GenInfo Identifier:119579308
NCBI Gene ID:1306
NCBI Accession:EAW58904.1
UniProt Secondary Accession:P39059,Q5T6J4, Q9UDC5, Q9Y4W4,
UniProt Related Accession:P39059
Molecular Weight:141,720 Da
NCBI Full Name:collagen, type XV, alpha 1, isoform CRA_f
NCBI Synonym Full Names:collagen, type XV, alpha 1
NCBI Official Symbol:COL15A1 Â 
NCBI Protein Information:collagen alpha-1(XV) chain; collagen alpha-1(XV) chain; restin; endostatin-XV; collagen type XV proteoglycan; collagen XV, alpha-1 polypeptide
UniProt Protein Name:Collagen alpha-1(XV) chain
UniProt Synonym Protein Names:Endostatin-XV; Related to endostatin; Restin-IRestin-2; Alternative name(s):; Restin-IIRestin-3; Alternative name(s):; Restin-IIIRestin-4; Alternative name(s):; Restin-IV
Protein Family:Zinc finger protein CONSTANS
UniProt Gene Name:COL15A1 Â 
UniProt Entry Name:COFA1_HUMAN

*Note: Protocols are specific to each batch/lot. For the correct instructions please follow the protocol included in your kit.

Before adding to wells, equilibrate the SABC working solution and TMB substrate for at least 30 min at 37°C. When diluting samples and reagents, they must be mixed completely and evenly. It is recommended to plot a standard curve for each test.

StepProtocol
1.Set standard, test sample and control (zero) wells on the pre-coated plate respectively, and then, record their positions. It is recommended to measure each standard and sample in duplicate. Wash plate 2 times before adding standard, sample and control (zero) wells!
2.Aliquot 0.1ml standard solutions into the standard wells.
3.Add 0.1 ml of Sample / Standard dilution buffer into the control (zero) well.
4.Add 0.1 ml of properly diluted sample ( Human serum, plasma, tissue homogenates and other biological fluids.) into test sample wells.
5.Seal the plate with a cover and incubate at 37 °C for 90 min.
6.Remove the cover and discard the plate content, clap the plate on the absorbent filter papers or other absorbent material. Do NOT let the wells completely dry at any time. Wash plate X2.
7.Add 0.1 ml of Biotin- detection antibody working solution into the above wells (standard, test sample & zero wells). Add the solution at the bottom of each well without touching the side wall.
8.Seal the plate with a cover and incubate at 37°C for 60 min.
9.Remove the cover, and wash plate 3 times with Wash buffer. Let wash buffer rest in wells for 1 min between each wash.
10.Add 0.1 ml of SABC working solution into each well, cover the plate and incubate at 37°C for 30 min.
11.Remove the cover and wash plate 5 times with Wash buffer, and each time let the wash buffer stay in the wells for 1-2 min.
12.Add 90 µl of TMB substrate into each well, cover the plate and incubate at 37°C in dark within 10-20 min. (Note: This incubation time is for reference use only, the optimal time should be determined by end user.) And the shades of blue can be seen in the first 3-4 wells (with most concentrated standard solutions), the other wells show no obvious color.
13.Add 50 µl of Stop solution into each well and mix thoroughly. The color changes into yellow immediately.
14. Read the O.D. absorbance at 450 nm in a microplate reader immediately after adding the stop solution.

When carrying out an ELISA assay it is important to prepare your samples in order to achieve the best possible results. Below we have a list of procedures for the preparation of samples for different sample types.

Sample TypeProtocol
SerumIf using serum separator tubes, allow samples to clot for 30 minutes at room temperature. Centrifuge for 10 minutes at 1,000x g. Collect the serum fraction and assay promptly or aliquot and store the samples at -80°C. Avoid multiple freeze-thaw cycles.

If serum separator tubes are not being used, allow samples to clot overnight at 2-8°C. Centrifuge for 10 minutes at 1,000x g. Remove serum and assay promptly or aliquot and store the samples at -80°C. Avoid multiple freeze-thaw cycles.

PlasmaCollect plasma using EDTA or heparin as an anticoagulant. Centrifuge samples at 4°C for 15 mins at 1000 × g within 30 mins of collection. Collect the plasma fraction and assay promptly or aliquot and store the samples at -80°C. Avoid multiple freeze-thaw cycles. Note: Over haemolysed samples are not suitable for use with this kit.
Urine & Cerebrospinal FluidCollect the urine (mid-stream) in a sterile container, centrifuge for 20 mins at 2000-3000 rpm. Remove supernatant and assay immediately. If any precipitation is detected, repeat the centrifugation step. A similar protocol can be used for cerebrospinal fluid.
Cell culture supernatantCollect the cell culture media by pipette, followed by centrifugation at 4°C for 20 mins at 1500 rpm. Collect the clear supernatant and assay immediately.
Cell lysatesSolubilize cells in lysis buffer and allow to sit on ice for 30 minutes. Centrifuge tubes at 14,000 x g for 5 minutes to remove insoluble material. Aliquot the supernatant into a new tube and discard the remaining whole cell extract. Quantify total protein concentration using a total protein assay. Assay immediately or aliquot and store at ≤ -20 °C.
Tissue homogenatesThe preparation of tissue homogenates will vary depending upon tissue type. Rinse tissue with 1X PBS to remove excess blood & homogenize in 20ml of 1X PBS (including protease inhibitors) and store overnight at ≤ -20°C. Two freeze-thaw cycles are required to break the cell membranes. To further disrupt the cell membranes you can sonicate the samples. Centrifuge homogenates for 5 mins at 5000xg. Remove the supernatant and assay immediately or aliquot and store at -20°C or -80°C.
Tissue lysatesRinse tissue with PBS, cut into 1-2 mm pieces, and homogenize with a tissue homogenizer in PBS. Add an equal volume of RIPA buffer containing protease inhibitors and lyse tissues at room temperature for 30 minutes with gentle agitation. Centrifuge to remove debris. Quantify total protein concentration using a total protein assay. Assay immediately or aliquot and store at ≤ -20 °C.
Breast MilkCollect milk samples and centrifuge at 10,000 x g for 60 min at 4°C. Aliquot the supernatant and assay. For long term use, store samples at -80°C. Minimize freeze/thaw cycles.

Related Products