Human CLPB/HSP78 (Caseinolytic peptidase B protein homolog) ELISA Kit (HUFI04735)
- SKU:
- HUFI04735
- Product Type:
- ELISA Kit
- Size:
- 96 Assays
- Uniprot:
- Q9H078
- Sensitivity:
- 0.469ng/ml
- Range:
- 0.781-50ng/ml
- ELISA Type:
- Sandwich
- Synonyms:
- Suppressor of potassium transport defect 3, SKD3
- Reactivity:
- Human
Frequently bought together:
Description
Human CLPB/HSP78 (Caseinolytic peptidase B protein homolog) ELISA Kit (HUFI04735)
The Human CLPB (HSP78) ELISA Kit is specifically developed for the precise quantification of Caseinolytic Peptidase B Protein Homolog (CLPB/HSP78) levels in human samples including serum, plasma, and cell culture supernatants. This kit offers exceptional sensitivity and specificity, guaranteeing accurate and consistent results, making it an invaluable tool for various research purposes.CLPB/HSP78 is a critical protein with chaperone activity involved in protein folding and quality control within the cell. Its dysregulation has been implicated in various diseases such as neurodegenerative disorders, metabolic diseases, and cancer, underscoring its importance as a potential biomarker for disease diagnosis and therapeutic development.
With the Human CLPB (HSP78) ELISA Kit, researchers can gain valuable insights into the role of CLPB/HSP78 in disease pathogenesis and explore new therapeutic strategies targeting this protein, ultimately advancing our understanding of disease mechanisms and improving patient outcomes.
| Product Name: | Human CLPB/HSP78 (Caseinolytic peptidase B protein homolog) ELISA Kit |
| Product Code: | HUFI04735 |
| Size: | 96 Assays |
| Alias: | Suppressor of potassium transport defect 3 ELISA Kit, SKD3 ELISA Kit |
| Detection method: | Sandwich ELISA, Double Antibody |
| Application: | This immunoassay kit allows for the in vitro quantitative determination of Human CLPB/HSP78 (Caseinolytic peptidase B protein homolog) concentrations in serum plasma and other biological fluids. |
| Sensitivity: | < 0.469ng/ml |
| Range: | 0.781-50ng/ml |
| Storage: | 4°C for 6 months |
| Note: | For Research Use Only |
| Recovery: | Matrices listed below were spiked with certain level of Human CLPB/HSP78 (Caseinolytic peptidase B protein homolog) and the recovery rates were calculated by comparing the measured value to the expected amount of Human CLPB/HSP78 (Caseinolytic peptidase B protein homolog) in samples. | ||||||||||||||||
| |||||||||||||||||
| Linearity: | The linearity of the kit was assayed by testing samples spiked with appropriate concentration of Human CLPB/HSP78 (Caseinolytic peptidase B protein homolog) and their serial dilutions. The results were demonstrated by the percentage of calculated concentration to the expected. | ||||||||||||||||
| |||||||||||||||||
| CV(%): | Intra-Assay: CV<8% Inter-Assay: CV<10% |
| Component | Quantity | Storage |
| ELISA Microplate (Dismountable) | 8×12 strips | 4°C for 6 months |
| Lyophilized Standard | 2 | 4°C/-20°C |
| Sample/Standard Dilution Buffer | 20ml | 4°C |
| Biotin-labeled Antibody(Concentrated) | 120ul | 4°C (Protect from light) |
| Antibody Dilution Buffer | 10ml | 4°C |
| HRP-Streptavidin Conjugate(SABC) | 120ul | 4°C (Protect from light) |
| SABC Dilution Buffer | 10ml | 4°C |
| TMB Substrate | 10ml | 4°C (Protect from light) |
| Stop Solution | 10ml | 4°C |
| Wash Buffer(25X) | 30ml | 4°C |
| Plate Sealer | 5 | - |
Other materials and equipment required:
- Microplate reader with 450 nm wavelength filter
- Multichannel Pipette, Pipette, microcentrifuge tubes and disposable pipette tips
- Incubator
- Deionized or distilled water
- Absorbent paper
- Buffer resevoir
| UniProt Protein Function: | CLPB: May function as a regulatory ATPase and be related to secretion/protein trafficking process. Belongs to the clpA/clpB family. 2 isoforms of the human protein are produced by alternative splicing. |
| UniProt Protein Details: | Protein type:Mitochondrial Chromosomal Location of Human Ortholog: 11q13.4 Molecular Function:protein binding Disease: 3-methylglutaconic Aciduria With Cataracts, Neurologic Involvement, And Neutropenia |
| NCBI Summary: | This gene belongs to the ATP-ases associated with diverse cellular activities (AAA+) superfamily. Members of this superfamily form ring-shaped homo-hexamers and have highly conserved ATPase domains that are involved in various processes including DNA replication, protein degradation and reactivation of misfolded proteins. All members of this family hydrolyze ATP through their AAA+ domains and use the energy generated through ATP hydrolysis to exert mechanical force on their substrates. In addition to an AAA+ domain, the protein encoded by this gene contains a C-terminal D2 domain, which is characteristic of the AAA+ subfamily of Caseinolytic peptidases to which this protein belongs. It cooperates with Hsp70 in the disaggregation of protein aggregates. Allelic variants of this gene are associated with 3-methylglutaconic aciduria, which causes cataracts and neutropenia. Alternative splicing results in multiple transcript variants. [provided by RefSeq, Apr 2015] |
| UniProt Code: | Q9H078 |
| NCBI GenInfo Identifier: | 25009267 |
| NCBI Gene ID: | 81570 |
| NCBI Accession: | Q9H078.1 |
| UniProt Secondary Accession: | Q9H078,Q8ND11, Q9H8Y0, B4DXJ7, B4DXP7, B4DXW4, E7EWN6 F8W7P6, |
| UniProt Related Accession: | Q9H078 |
| Molecular Weight: | 57,664 Da |
| NCBI Full Name: | Caseinolytic peptidase B protein homolog |
| NCBI Synonym Full Names: | ClpB homolog, mitochondrial AAA ATPase chaperonin |
| NCBI Official Symbol: | CLPB |
| NCBI Official Synonym Symbols: | SKD3; HSP78; MGCA7; ANKCLB; MEGCANN |
| NCBI Protein Information: | caseinolytic peptidase B protein homolog |
| UniProt Protein Name: | Caseinolytic peptidase B protein homolog |
| UniProt Synonym Protein Names: | Suppressor of potassium transport defect 3 |
| Protein Family: | Chaperone protein |
| UniProt Gene Name: | CLPB |
| UniProt Entry Name: | CLPB_HUMAN |
*Note: Protocols are specific to each batch/lot. For the correct instructions please follow the protocol included in your kit.
Before adding to wells, equilibrate the SABC working solution and TMB substrate for at least 30 min at 37 °C. When diluting samples and reagents, they must be mixed completely and evenly. It is recommended to plot a standard curve for each test.
| Step | Protocol |
| 1. | Set standard, test sample and control (zero) wells on the pre-coated plate respectively, and then, record their positions. It is recommended to measure each standard and sample in duplicate. Wash plate 2 times before adding standard, sample and control (zero) wells! |
| 2. | Aliquot 0.1ml standard solutions into the standard wells. |
| 3. | Add 0.1 ml of Sample / Standard dilution buffer into the control (zero) well. |
| 4. | Add 0.1 ml of properly diluted sample ( Human serum, plasma, tissue homogenates and other biological fluids.) into test sample wells. |
| 5. | Seal the plate with a cover and incubate at 37 °C for 90 min. |
| 6. | Remove the cover and discard the plate content, clap the plate on the absorbent filter papers or other absorbent material. Do NOT let the wells completely dry at any time. Wash plate X2. |
| 7. | Add 0.1 ml of Biotin- detection antibody working solution into the above wells (standard, test sample & zero wells). Add the solution at the bottom of each well without touching the side wall. |
| 8. | Seal the plate with a cover and incubate at 37 °C for 60 min. |
| 9. | Remove the cover, and wash plate 3 times with Wash buffer. Let wash buffer rest in wells for 1 min between each wash. |
| 10. | Add 0.1 ml of SABC working solution into each well, cover the plate and incubate at 37 °C for 30 min. |
| 11. | Remove the cover and wash plate 5 times with Wash buffer, and each time let the wash buffer stay in the wells for 1-2 min. |
| 12. | Add 90 µL of TMB substrate into each well, cover the plate and incubate at 37 °C in dark within 10-20 min. (Note: This incubation time is for reference use only, the optimal time should be determined by end user.) And the shades of blue can be seen in the first 3-4 wells (with most concentrated standard solutions), the other wells show no obvious color. |
| 13. | Add 50 µL of Stop solution into each well and mix thoroughly. The color changes into yellow immediately. |
| 14. | Read the O.D. absorbance at 450 nm in a microplate reader immediately after adding the stop solution. |
When carrying out an ELISA assay it is important to prepare your samples in order to achieve the best possible results. Below we have a list of procedures for the preparation of samples for different sample types.
| Sample Type | Protocol |
| Serum | If using serum separator tubes, allow samples to clot for 30 minutes at room temperature. Centrifuge for 10 minutes at 1,000x g. Collect the serum fraction and assay promptly or aliquot and store the samples at -80°C. Avoid multiple freeze-thaw cycles. If serum separator tubes are not being used, allow samples to clot overnight at 2-8°C. Centrifuge for 10 minutes at 1,000x g. Remove serum and assay promptly or aliquot and store the samples at -80°C. Avoid multiple freeze-thaw cycles. |
| Plasma | Collect plasma using EDTA or heparin as an anticoagulant. Centrifuge samples at 4°C for 15 mins at 1000 × g within 30 mins of collection. Collect the plasma fraction and assay promptly or aliquot and store the samples at -80°C. Avoid multiple freeze-thaw cycles. Note: Over haemolysed samples are not suitable for use with this kit. |
| Urine & Cerebrospinal Fluid | Collect the urine (mid-stream) in a sterile container, centrifuge for 20 mins at 2000-3000 rpm. Remove supernatant and assay immediately. If any precipitation is detected, repeat the centrifugation step. A similar protocol can be used for cerebrospinal fluid. |
| Cell culture supernatant | Collect the cell culture media by pipette, followed by centrifugation at 4°C for 20 mins at 1500 rpm. Collect the clear supernatant and assay immediately. |
| Cell lysates | Solubilize cells in lysis buffer and allow to sit on ice for 30 minutes. Centrifuge tubes at 14,000 x g for 5 minutes to remove insoluble material. Aliquot the supernatant into a new tube and discard the remaining whole cell extract. Quantify total protein concentration using a total protein assay. Assay immediately or aliquot and store at ≤ -20 °C. |
| Tissue homogenates | The preparation of tissue homogenates will vary depending upon tissue type. Rinse tissue with 1X PBS to remove excess blood & homogenize in 20ml of 1X PBS (including protease inhibitors) and store overnight at ≤ -20°C. Two freeze-thaw cycles are required to break the cell membranes. To further disrupt the cell membranes you can sonicate the samples. Centrifuge homogenates for 5 mins at 5000xg. Remove the supernatant and assay immediately or aliquot and store at -20°C or -80°C. |
| Tissue lysates | Rinse tissue with PBS, cut into 1-2 mm pieces, and homogenize with a tissue homogenizer in PBS. Add an equal volume of RIPA buffer containing protease inhibitors and lyse tissues at room temperature for 30 minutes with gentle agitation. Centrifuge to remove debris. Quantify total protein concentration using a total protein assay. Assay immediately or aliquot and store at ≤ -20 °C. |
| Breast Milk | Collect milk samples and centrifuge at 10,000 x g for 60 min at 4°C. Aliquot the supernatant and assay. For long term use, store samples at -80°C. Minimize freeze/thaw cycles. |
Related Products
Human LIN7B(Protein lin-7 homolog B) ELISA Kit
$719
Human ZG16B / Zymogen granule protein 16 homolog B ELISA Kit
$719
Human NOTUM / Protein notum homolog ELISA Kit
$719
Human Coenzyme Q-binding protein COQ10 homolog B, mitochondrial ELISA Kit
$719
Human RAD23 Homolog B (RAD23B) ELISA Kit
$899
Human Zymogen granule protein 16 homolog B (ZG16B) ELISA Kit (HUEB2247)
$779
Human ATOH1 / Protein atonal homolog 1 ELISA Kit
$719
Human PELO (Protein pelota homolog) ELISA Kit (HUFI07273)
$719