null

Human BNIP3(BCL2/adenovirus E1B 19 kDa protein-interacting protein 3) ELISA Kit (HUFI03048)

SKU:
HUFI03048
Product Type:
ELISA Kit
Size:
96 Assays
Uniprot:
Q12983
Sensitivity:
0.281ng/ml
Range:
0.469-30ng/ml
ELISA Type:
Sandwich
Synonyms:
NIP3
Reactivity:
Human
€599
Frequently bought together:

Description

system_update_altDatasheetsystem_update_altMSDS

Human BNIP3 (BCL2/adenovirus E1B 19 kDa protein-interacting protein 3) ELISA Kit

The Human BNIP3 (BCL2/Adenovirus E1B 19 kDa Protein-Interacting Protein 3) ELISA Kit from AssayGenie is expertly designed for the precise measurement of BNIP3 levels in human samples such as serum, plasma, and cell culture supernatants. With its exceptional sensitivity and specificity, this kit delivers dependable and consistent results, making it an invaluable tool for a variety of research purposes.BNIP3 is a key protein that plays a crucial role in various cellular processes, including apoptosis and autophagy.

Dysregulation of BNIP3 has been implicated in various diseases, including cancer, cardiovascular disorders, and neurodegenerative conditions. By accurately measuring BNIP3 levels, researchers can gain valuable insights into the pathophysiology of these diseases and potentially identify new therapeutic targets.Get your hands on the Human BNIP3 ELISA Kit from AssayGenie today and uncover the mysteries of BNIP3 biology with precision and reliability.

Product Name:Human BNIP3(BCL2/adenovirus E1B 19 kDa protein-interacting protein 3) ELISA Kit
Product Code:HUFI03048
Size:96 Assays
Alias:NIP3
Detection method:Sandwich ELISA, Double Antibody
Application:This immunoassay kit allows for the in vitro quantitative determination of Human BNIP3 concentrations in serum plasma and other biological fluids.
Sensitivity:0.281ng/ml
Range:0.469-30ng/ml
Storage:4°C for 6 months
Note:For Research Use Only
Recovery:Matrices listed below were spiked with certain level of Human BNIP3 and the recovery rates were calculated by comparing the measured value to the expected amount of Human BNIP3 in samples. Enquire for more information.
Linearity:The linearity of the kit was assayed by testing samples spiked with appropriate concentration of Human BNIP3 and their serial dilutions. The results were demonstrated by the percentage of calculated concentration to the expected. Enquire for more information.
CV(%):Intra-Assay: CV<8%
Inter-Assay: CV<10%
ComponentQuantityStorage
ELISA Microplate (Dismountable)8×12 strips4°C for 6 months
Lyophilized Standard24°C/-20°C
Sample/Standard Dilution Buffer20ml4°C
Biotin-labeled Antibody(Concentrated)120ul4°C (Protect from light)
Antibody Dilution Buffer10ml4°C
HRP-Streptavidin Conjugate(SABC)120ul4°C (Protect from light)
SABC Dilution Buffer10ml4°C
TMB Substrate10ml4°C (Protect from light)
Stop Solution10ml4°C
Wash Buffer(25X)30ml4°C
Plate Sealer5-

Other materials and equipment required:

  • Microplate reader with 450 nm wavelength filter
  • Multichannel Pipette, Pipette, microcentrifuge tubes and disposable pipette tips
  • Incubator
  • Deionized or distilled water
  • Absorbent paper
  • Buffer resevoir
UniprotQ12983
UniProt Protein Function:BNIP3: Apoptosis-inducing protein that, which can overcome BCL2 suppression. May play a role in repartitioning calcium between the two major intracellular calcium stores in association with BCL2. Homodimer. Binds to BCL2. Interacts with BNIP3L and ACAA2. Also can interact with adenovirus E1B 19 kDa protein or Epstein-Barr virus BHRF1. Belongs to the NIP3 family.
UniProt Protein Details:Protein type:Mitochondrial; Membrane protein, integral

Chromosomal Location of Human Ortholog: 10q26.3

Cellular Component: nucleoplasm; mitochondrial outer membrane; mitochondrion; endoplasmic reticulum; dendrite; cytoplasm; mitochondrial membrane; nuclear envelope; nucleus; integral to mitochondrial outer membrane

Molecular Function:identical protein binding; GTPase binding; protein binding; protein homodimerization activity; protein heterodimerization activity

Biological Process: cell death; positive regulation of protein complex disassembly; induction of apoptosis by granzyme; viral reproduction; positive regulation of apoptosis; apoptosis; neuron apoptosis; positive regulation of programmed cell death; response to hyperoxia; brown fat cell differentiation; autophagic cell death; response to hypoxia; regulation of mitochondrial membrane permeability; mitochondrial fragmentation during apoptosis; negative regulation of membrane potential; defense response to virus; positive regulation of autophagy; negative regulation of apoptosis

NCBI Summary:This gene is a member of the BCL2/adenovirus E1B 19 kd-interacting protein (BNIP) family. It interacts with the E1B 19 kDa protein, which protects cells from virally-induced cell death. The encoded protein also interacts with E1B 19 kDa-like sequences of BCL2, another apoptotic protector. This protein contains a BH3 domain and a transmembrane domain, which have been associated with pro-apoptotic function. The dimeric mitochondrial protein encoded by this gene is known to induce apoptosis, even in the presence of BCL2. [provided by RefSeq, Mar 2011]
UniProt Code:Q12983
NCBI GenInfo Identifier:20532402
NCBI Gene ID:664
NCBI Accession:Q12983.2
UniProt Secondary Accession:Q12983,O14620, Q96GP0,
UniProt Related Accession:Q12983
Molecular Weight:21,541 Da
NCBI Full Name:BCL2/adenovirus E1B 19 kDa protein-interacting protein 3
NCBI Synonym Full Names:BCL2/adenovirus E1B 19kDa interacting protein 3
NCBI Official Symbol:BNIP3  
NCBI Official Synonym Symbols:NIP3  
NCBI Protein Information:BCL2/adenovirus E1B 19 kDa protein-interacting protein 3
UniProt Protein Name:BCL2/adenovirus E1B 19 kDa protein-interacting protein 3
Protein Family:BNIP3
UniProt Gene Name:BNIP3  
UniProt Entry Name:BNIP3_HUMAN

*Note: Protocols are specific to each batch/lot. For the correct instructions please follow the protocol included in your kit.

Before adding to wells, equilibrate the SABC working solution and TMB substrate for at least 30 min at 37°C. When diluting samples and reagents, they must be mixed completely and evenly. It is recommended to plot a standard curve for each test.

StepProtocol
1.Set standard, test sample and control (zero) wells on the pre-coated plate respectively, and then, record their positions. It is recommended to measure each standard and sample in duplicate. Wash plate 2 times before adding standard, sample and control (zero) wells!
2.Aliquot 0.1ml standard solutions into the standard wells.
3.Add 0.1 ml of Sample / Standard dilution buffer into the control (zero) well.
4.Add 0.1 ml of properly diluted sample ( Human serum, plasma, tissue homogenates and other biological fluids.) into test sample wells.
5.Seal the plate with a cover and incubate at 37 °C for 90 min.
6.Remove the cover and discard the plate content, clap the plate on the absorbent filter papers or other absorbent material. Do NOT let the wells completely dry at any time. Wash plate X2.
7.Add 0.1 ml of Biotin- detection antibody working solution into the above wells (standard, test sample & zero wells). Add the solution at the bottom of each well without touching the side wall.
8.Seal the plate with a cover and incubate at 37°C for 60 min.
9.Remove the cover, and wash plate 3 times with Wash buffer. Let wash buffer rest in wells for 1 min between each wash.
10.Add 0.1 ml of SABC working solution into each well, cover the plate and incubate at 37°C for 30 min.
11.Remove the cover and wash plate 5 times with Wash buffer, and each time let the wash buffer stay in the wells for 1-2 min.
12.Add 90 µl of TMB substrate into each well, cover the plate and incubate at 37°C in dark within 10-20 min. (Note: This incubation time is for reference use only, the optimal time should be determined by end user.) And the shades of blue can be seen in the first 3-4 wells (with most concentrated standard solutions), the other wells show no obvious color.
13.Add 50 µl of Stop solution into each well and mix thoroughly. The color changes into yellow immediately.
14. Read the O.D. absorbance at 450 nm in a microplate reader immediately after adding the stop solution.

When carrying out an ELISA assay it is important to prepare your samples in order to achieve the best possible results. Below we have a list of procedures for the preparation of samples for different sample types.

Sample TypeProtocol
SerumIf using serum separator tubes, allow samples to clot for 30 minutes at room temperature. Centrifuge for 10 minutes at 1,000x g. Collect the serum fraction and assay promptly or aliquot and store the samples at -80°C. Avoid multiple freeze-thaw cycles.

If serum separator tubes are not being used, allow samples to clot overnight at 2-8°C. Centrifuge for 10 minutes at 1,000x g. Remove serum and assay promptly or aliquot and store the samples at -80°C. Avoid multiple freeze-thaw cycles.

PlasmaCollect plasma using EDTA or heparin as an anticoagulant. Centrifuge samples at 4°C for 15 mins at 1000 × g within 30 mins of collection. Collect the plasma fraction and assay promptly or aliquot and store the samples at -80°C. Avoid multiple freeze-thaw cycles. Note: Over haemolysed samples are not suitable for use with this kit.
Urine & Cerebrospinal FluidCollect the urine (mid-stream) in a sterile container, centrifuge for 20 mins at 2000-3000 rpm. Remove supernatant and assay immediately. If any precipitation is detected, repeat the centrifugation step. A similar protocol can be used for cerebrospinal fluid.
Cell culture supernatantCollect the cell culture media by pipette, followed by centrifugation at 4°C for 20 mins at 1500 rpm. Collect the clear supernatant and assay immediately.
Cell lysatesSolubilize cells in lysis buffer and allow to sit on ice for 30 minutes. Centrifuge tubes at 14,000 x g for 5 minutes to remove insoluble material. Aliquot the supernatant into a new tube and discard the remaining whole cell extract. Quantify total protein concentration using a total protein assay. Assay immediately or aliquot and store at ≤ -20 °C.
Tissue homogenatesThe preparation of tissue homogenates will vary depending upon tissue type. Rinse tissue with 1X PBS to remove excess blood & homogenize in 20ml of 1X PBS (including protease inhibitors) and store overnight at ≤ -20°C. Two freeze-thaw cycles are required to break the cell membranes. To further disrupt the cell membranes you can sonicate the samples. Centrifuge homogenates for 5 mins at 5000xg. Remove the supernatant and assay immediately or aliquot and store at -20°C or -80°C.
Tissue lysatesRinse tissue with PBS, cut into 1-2 mm pieces, and homogenize with a tissue homogenizer in PBS. Add an equal volume of RIPA buffer containing protease inhibitors and lyse tissues at room temperature for 30 minutes with gentle agitation. Centrifuge to remove debris. Quantify total protein concentration using a total protein assay. Assay immediately or aliquot and store at ≤ -20 °C.
Breast MilkCollect milk samples and centrifuge at 10,000 x g for 60 min at 4°C. Aliquot the supernatant and assay. For long term use, store samples at -80°C. Minimize freeze/thaw cycles.

Related Products