Human ACE2 ELISA Kit (HUEB2012)- High Sensitivity

Product Name:	Human Angiotensin-converting enzyme 2 (ACE2) ELISA Kit
SKU:	HUEB2012
Size:	96T
Target:	Human Angiotensin-converting enzyme 2 (ACE2)
Synonyms:	ACE-related carboxypeptidase, Angiotensin-converting enzyme homolog, Metalloprotease MPROT15, ACEH, UNQ868/PRO1885
Assay Type:	Sandwich
Detection Method:	ELISA
Reactivity:	Human
Detection Range:	0.78-50ng/mL
Sensitivity:	0.34ng/mL

Intra CV:

5.1%

Inter CV:

8.7%

Linearity:

Sample	1:2	1:4	1:8	1:16
Serum(N=5)	97-106%	103-113%	113-113%	108-116%
EDTA Plasma(N=5)	81-89%	94-106%	85-93%	101-113%
Heparin Plasma(N=5)	116-125%	102-111%	84-93%	102-111%

Recovery:

Sample Type	Average(%)	Recovery Range(%)
Serum	94	88-100
Plasma	96	90-102

Function:

(Microbial infection) Acts as a receptor for SARS coronavirus/SARS-CoV and human coronavirus NL63/HCoV-NL63.

Uniprot:	Q9BYF1
Sample Type:	Serum, plasma, tissue homogenates, cell culture supernates and other biological fluids
Specificity:	Natural and recombinant human Angiotensin-converting enzyme 2
Sub Unit:	(Microbial infection) Interacts with SARS coronavirus/SARS-CoV and human coronavirus NL63/HCoV-NL63 spike glycoprotein (PubMed:14647384, PubMed:15452268, PubMed:15791205, PubMed:15897467).
Research Area:	Development Biology
Subcellular Location:	Cell membrane Single-pass type I membrane protein Cytoplasm Detected in both cell membrane and cytoplasm in neurons.
Storage:	Please see kit components below for exact storage details
Note:	For research use only

UniProt Protein Function:	ACE2: Carboxypeptidase which converts angiotensin I to angiotensin 1-9, a peptide of unknown function, and angiotensin II to angiotensin 1-7, a vasodilator. Also able to hydrolyze apelin- 13 and dynorphin-13 with high efficiency. May be an important regulator of heart function. In case of human coronaviruses SARS and HCoV-NL63 infections, serve as functional receptor for the spike glycoprotein of both coronaviruses. Interacts with ITGB1. Interacts with SARS-CoV and HCoV- NL63 spike glycoprotein. Up-regulated in failing heart. Expressed in endothelial cells from small and large arteries, and in arterial smooth muscle cells. Expressed in lung alveolar epithelial cells, enterocytes of the small intestine, Leydig cells and Sertoli cells. Expressed in heart, kidney, testis, and gastrointestinal system. Activated by chloride and fluoride, but not bromide. Inhibited by MLN-4760, cFP_Leu, and EDTA, but not by the ACE inhibitors linosipril, captopril and enalaprilat. Belongs to the peptidase M2 family. 2 isoforms of the human protein are produced by alternative splicing.
UniProt Protein Details:	Protein type:Membrane protein, integral; EC 3.4.17.23; Protease Chromosomal Location of Human Ortholog: Xp22 Cellular Component: cell surface; extracellular region; extracellular space; lipid raft; plasma membrane Molecular Function:carboxypeptidase activity; endopeptidase activity; glycoprotein binding; metallocarboxypeptidase activity; metallopeptidase activity; peptidyl-dipeptidase activity; protein binding; viral receptor activity; zinc ion binding Biological Process: angiotensin catabolic process in blood; angiotensin maturation; angiotensin mediated drinking behavior; entry of virus into host cell; receptor biosynthetic process; regulation of cell proliferation; regulation of cytokine production; regulation of inflammatory response; regulation of systemic arterial blood pressure by renin-angiotensin; regulation of vasoconstriction; regulation of vasodilation; virion attachment, binding of host cell surface receptor
NCBI Summary:	The protein encoded by this gene belongs to the angiotensin-converting enzyme family of dipeptidyl carboxydipeptidases and has considerable homology to human angiotensin 1 converting enzyme. This secreted protein catalyzes the cleavage of angiotensin I into angiotensin 1-9, and angiotensin II into the vasodilator angiotensin 1-7. The organ- and cell-specific expression of this gene suggests that it may play a role in the regulation of cardiovascular and renal function, as well as fertility. In addition, the encoded protein is a functional receptor for the spike glycoprotein of the human coronaviruses SARS and HCoV-NL63. [provided by RefSeq, Jul 2008]
UniProt Code:	Q9BYF1
NCBI GenInfo Identifier:	71658783
NCBI Gene ID:	59272
NCBI Accession:	Q9BYF1.2
UniProt Secondary Accession:	Q9BYF1,Q6UWP0, Q86WT0, Q9NRA7, Q9UFZ6, C7ECU1,
UniProt Related Accession:	Q9BYF1
Molecular Weight:	63,912 Da
NCBI Full Name:	Angiotensin-converting enzyme 2
NCBI Synonym Full Names:	angiotensin I converting enzyme 2
NCBI Official Symbol:	ACE2
NCBI Official Synonym Symbols:	ACEH
NCBI Protein Information:	angiotensin-converting enzyme 2
UniProt Protein Name:	Angiotensin-converting enzyme 2
UniProt Synonym Protein Names:	ACE-related carboxypeptidase; Angiotensin-converting enzyme homolog; ACEH
Protein Family:	Angiotensin-converting enzyme
UniProt Gene Name:	ACE2
UniProt Entry Name:	ACE2_HUMAN

Component	Quantity (96 Assays)	Storage
ELISA Microplate (Dismountable)	8×12 strips	-20°C
Lyophilized Standard	2	-20°C
Sample Diluent	20ml	-20°C
Assay Diluent A	10mL	-20°C
Assay Diluent B	10mL	-20°C
Detection Reagent A	120µL	-20°C
Detection Reagent B	120µL	-20°C
Wash Buffer	30mL	4°C
Substrate	10mL	4°C
Stop Solution	10mL	4°C
Plate Sealer	5	-

Other materials and equipment required:

Microplate reader with 450 nm wavelength filter
Multichannel Pipette, Pipette, microcentrifuge tubes and disposable pipette tips
Incubator
Deionized or distilled water
Absorbent paper
Buffer resevoir

*Note: The below protocol is a sample protocol. Protocols are specific to each batch/lot. For the correct instructions please follow the protocol included in your kit.

Allow all reagents to reach room temperature (Please do not dissolve the reagents at 37°C directly). All the reagents should be mixed thoroughly by gently swirling before pipetting. Avoid foaming. Keep appropriate numbers of strips for 1 experiment and remove extra strips from microtiter plate. Removed strips should be resealed and stored at -20°C until the kits expiry date. Prepare all reagents, working standards and samples as directed in the previous sections. Please predict the concentration before assaying. If values for these are not within the range of the standard curve, users must determine the optimal sample dilutions for their experiments. We recommend running all samples in duplicate.

Step
1.	Add Sample: Add 100µL of Standard, Blank, or Sample per well. The blank well is added with Sample diluent. Solutions are added to the bottom of micro ELISA plate well, avoid inside wall touching and foaming as possible. Mix it gently. Cover the plate with sealer we provided. Incubate for 120 minutes at 37°C.
2.	Remove the liquid from each well, don't wash. Add 100µL of Detection Reagent A working solution to each well. Cover with the Plate sealer. Gently tap the plate to ensure thorough mixing. Incubate for 1 hour at 37°C. Note: if Detection Reagent A appears cloudy warm to room temperature until solution is uniform.
3.	Aspirate each well and wash, repeating the process three times. Wash by filling each well with Wash Buffer (approximately 400µL) (a squirt bottle, multi-channel pipette,manifold dispenser or automated washer are needed). Complete removal of liquid at each step is essential. After the last wash, completely remove remaining Wash Buffer by aspirating or decanting. Invert the plate and pat it against thick clean absorbent paper.
4.	Add 100µL of Detection Reagent B working solution to each well. Cover with the Plate sealer. Incubate for 60 minutes at 37°C.
5.	Repeat the wash process for five times as conducted in step 3.
6.	Add 90µL of Substrate Solution to each well. Cover with a new Plate sealer and incubate for 10-20 minutes at 37°C. Protect the plate from light. The reaction time can be shortened or extended according to the actual color change, but this should not exceed more than 30 minutes. When apparent gradient appears in standard wells, user should terminatethe reaction.
7.	Add 50µL of Stop Solution to each well. If color change does not appear uniform, gently tap the plate to ensure thorough mixing.
8.	Determine the optical density (OD value) of each well at once, using a micro-plate reader set to 450 nm. User should open the micro-plate reader in advance, preheat the instrument, and set the testing parameters.
9.	After experiment, store all reagents according to the specified storage temperature respectively until their expiry.

When carrying out an ELISA assay it is important to prepare your samples in order to achieve the best possible results. Below we have a list of procedures for the preparation of samples for different sample types.

Sample Type	Protocol
Serum	If using serum separator tubes, allow samples to clot for 30 minutes at room temperature. Centrifuge for 10 minutes at 1,000x g. Collect the serum fraction and assay promptly or aliquot and store the samples at -80°C. Avoid multiple freeze-thaw cycles. If serum separator tubes are not being used, allow samples to clot overnight at 2-8°C. Centrifuge for 10 minutes at 1,000x g. Remove serum and assay promptly or aliquot and store the samples at -80°C. Avoid multiple freeze-thaw cycles.
Plasma	Collect plasma using EDTA or heparin as an anticoagulant. Centrifuge samples at 4°C for 15 mins at 1000 × g within 30 mins of collection. Collect the plasma fraction and assay promptly or aliquot and store the samples at -80°C. Avoid multiple freeze-thaw cycles. Note: Over haemolysed samples are not suitable for use with this kit.
Urine & Cerebrospinal Fluid	Collect the urine (mid-stream) in a sterile container, centrifuge for 20 mins at 2000-3000 rpm. Remove supernatant and assay immediately. If any precipitation is detected, repeat the centrifugation step. A similar protocol can be used for cerebrospinal fluid.
Cell culture supernatant	Collect the cell culture media by pipette, followed by centrifugation at 4°C for 20 mins at 1500 rpm. Collect the clear supernatant and assay immediately.
Cell lysates	Solubilize cells in lysis buffer and allow to sit on ice for 30 minutes. Centrifuge tubes at 14,000 x g for 5 minutes to remove insoluble material. Aliquot the supernatant into a new tube and discard the remaining whole cell extract. Quantify total protein concentration using a total protein assay. Assay immediately or aliquot and store at ≤ -20 °C.
Tissue homogenates	The preparation of tissue homogenates will vary depending upon tissue type. Rinse tissue with 1X PBS to remove excess blood & homogenize in 20ml of 1X PBS (including protease inhibitors) and store overnight at ≤ -20°C. Two freeze-thaw cycles are required to break the cell membranes. To further disrupt the cell membranes you can sonicate the samples. Centrifuge homogenates for 5 mins at 5000xg. Remove the supernatant and assay immediately or aliquot and store at -20°C or -80°C.
Tissue lysates	Rinse tissue with PBS, cut into 1-2 mm pieces, and homogenize with a tissue homogenizer in PBS. Add an equal volume of RIPA buffer containing protease inhibitors and lyse tissues at room temperature for 30 minutes with gentle agitation. Centrifuge to remove debris. Quantify total protein concentration using a total protein assay. Assay immediately or aliquot and store at ≤ -20 °C.
Breast Milk	Collect milk samples and centrifuge at 10,000 x g for 60 min at 4°C. Aliquot the supernatant and assay. For long term use, store samples at -80°C. Minimize freeze/thaw cycles.

ELISA	Antibodies
Human Angiotensin Converting Enzyme 2 / ACE2 ELISA Kit	Anti-ACE2 Antibody (CAB12737)
Human ACE2 (Angiotensin I Converting Enzyme 2) CLIA Kit (HUES00209)	Anti-ACE2 Antibody (CAB4612)
Human ACE2 (Angiotensin I Converting Enzyme 2) ELISA Kit (HUES01516)	ACE2 Antibody (PACO04894)
	ACCS Antibody (PACO07555)
	ANGPTL7 Antibody (PACO15438)