null

Human Alpha-crystallin A chain / CRYAA ELISA Kit

SKU:
HUFI01334
Product Type:
ELISA Kit
Size:
96 Assays
Uniprot:
P02489
Sensitivity:
0.469ng/ml
Range:
0.781-50ng/ml
ELISA Type:
Sandwich
Synonyms:
CRYAA, Alpha-crystallin A chain, Heat shock protein beta-4, HspB4, CRYA1, HSPB4, 10HspB4, crystallin, alpha A
Reactivity:
Human
Research Area:
Signal Transduction
€599
Frequently bought together:

Description

system_update_altDatasheetsystem_update_altMSDS

Human Alpha-crystallin A chain/CRYAA ELISA Kit

The Human Alpha Crystallin A Chain (CRYAA) ELISA Kit offered by Assay Genie is a cutting-edge tool for the precise measurement of CRYAA levels in human samples. This kit is optimized to provide superior sensitivity and specificity, ensuring accurate and reproducible results for a variety of research purposes.CRYAA, a key component of the eye lens, is also found in other tissues where it functions as a chaperone protein, assisting in the proper folding and maintenance of other proteins.

Dysregulation of CRYAA has been linked to various ocular diseases, including cataracts, as well as neurodegenerative conditions such as Alzheimer's disease.By using the Human CRYAA ELISA Kit, researchers can gain valuable insights into the role of CRYAA in disease pathogenesis and progression, paving the way for potential therapeutic interventions. Trust Assay Genie's ELISA Kit to deliver accurate and reliable results for your research endeavors.

Product Name:Human Alpha-crystallin A chain / CRYAA ELISA Kit
Product Code:HUFI01334
Size:96 Assays
Alias:CRYAA, Alpha-crystallin A chain, Heat shock protein beta-4, HspB4, CRYA1, HSPB4, 10HspB4, crystallin, alpha A
Detection method:Sandwich ELISA, Double Antibody
Application:This immunoassay kit allows for the in vitro quantitative determination of Human CRYAA concentrations in serum plasma and other biological fluids.
Sensitivity:0.469ng/ml
Range:0.781-50ng/ml
Storage:4°C for 6 months
Note:For Research Use Only
Recovery:Matrices listed below were spiked with certain level of Human CRYAA and the recovery rates were calculated by comparing the measured value to the expected amount of Human CRYAA in samples.
MatrixRecovery range(%)Average(%)
serum(n=5)89-10297
EDTA plasma(n=5)86-10193
UFH plasma(n=5)90-10196
Linearity:The linearity of the kit was assayed by testing samples spiked with appropriate concentration of Human CRYAA and their serial dilutions. The results were demonstrated by the percentage of calculated concentration to the expected.
Sample1:21:41:8
serum(n=5)88-105%87-99%89-98%
EDTA plasma(n=5)84-98%82-101%82-99%
UFH plasma(n=5)87-98%83-96%80-87%
CV(%):Intra-Assay: CV<8%
Inter-Assay: CV<10%
ComponentQuantityStorage
ELISA Microplate (Dismountable)8×12 strips4°C for 6 months
Lyophilized Standard24°C/-20°C
Sample/Standard Dilution Buffer20ml4°C
Biotin-labeled Antibody(Concentrated)120ul4°C (Protect from light)
Antibody Dilution Buffer10ml4°C
HRP-Streptavidin Conjugate(SABC)120ul4°C (Protect from light)
SABC Dilution Buffer10ml4°C
TMB Substrate10ml4°C (Protect from light)
Stop Solution10ml4°C
Wash Buffer(25X)30ml4°C
Plate Sealer5-

Other materials and equipment required:

  • Microplate reader with 450 nm wavelength filter
  • Multichannel Pipette, Pipette, microcentrifuge tubes and disposable pipette tips
  • Incubator
  • Deionized or distilled water
  • Absorbent paper
  • Buffer resevoir
UniprotP02489
UniProt Protein Function:CRYA1: a major structural protein of the eye lens. A member of the small heat shock protein (sHSP, also known as the HSP20) family. Alpha-A is preferentially restricted to the lens.
UniProt Protein Details:Protein type:Heat shock protein; Chaperone

Chromosomal Location of Human Ortholog: 21q22.3

Cellular Component: cytoplasm; nucleus

Molecular Function:identical protein binding; protein binding; metal ion binding; unfolded protein binding; structural constituent of eye lens

Biological Process: negative regulation of intracellular transport; visual perception; response to stimulus; protein refolding; protein homooligomerization; negative regulation of apoptosis

Disease: Cataract 9, Multiple Types

NCBI Summary:Mammalian lens crystallins are divided into alpha, beta, and gamma families. Alpha crystallins are composed of two gene products: alpha-A and alpha-B, for acidic and basic, respectively. Alpha crystallins can be induced by heat shock and are members of the small heat shock protein (HSP20) family. They act as molecular chaperones although they do not renature proteins and release them in the fashion of a true chaperone; instead they hold them in large soluble aggregates. Post-translational modifications decrease the ability to chaperone. These heterogeneous aggregates consist of 30-40 subunits; the alpha-A and alpha-B subunits have a 3:1 ratio, respectively. Two additional functions of alpha crystallins are an autokinase activity and participation in the intracellular architecture. The encoded protein has been identified as a moonlighting protein based on its ability to perform mechanistically distinct functions. Alpha-A and alpha-B gene products are differentially expressed; alpha-A is preferentially restricted to the lens and alpha-B is expressed widely in many tissues and organs. Defects in this gene cause autosomal dominant congenital cataract (ADCC). [provided by RefSeq, Jan 2014]
UniProt Code:P02489
NCBI GenInfo Identifier:1706112
NCBI Gene ID:1409
NCBI Accession:P02489.2
UniProt Secondary Accession:P02489,Q53X53,
UniProt Related Accession:P02489,AAB33370
Molecular Weight:173
NCBI Full Name:Alpha-crystallin A chain
NCBI Synonym Full Names:crystallin, alpha A
NCBI Official Symbol:CRYAA  
NCBI Official Synonym Symbols:CRYA1; HSPB4; CTRCT9  
NCBI Protein Information:alpha-crystallin A chain; crystallin, alpha-1; heat shock protein beta-4; human alphaA-crystallin (CRYA1)
UniProt Protein Name:Alpha-crystallin A chain
UniProt Synonym Protein Names:Heat shock protein beta-4; HspB4
Protein Family:Alpha-crystallin
UniProt Gene Name:CRYAA  
UniProt Entry Name:CRYAA_HUMAN

*Note: Protocols are specific to each batch/lot. For the correct instructions please follow the protocol included in your kit.

Before adding to wells, equilibrate the SABC working solution and TMB substrate for at least 30 min at 37°C. When diluting samples and reagents, they must be mixed completely and evenly. It is recommended to plot a standard curve for each test.

StepProtocol
1.Set standard, test sample and control (zero) wells on the pre-coated plate respectively, and then, record their positions. It is recommended to measure each standard and sample in duplicate. Wash plate 2 times before adding standard, sample and control (zero) wells!
2.Aliquot 0.1ml standard solutions into the standard wells.
3.Add 0.1 ml of Sample / Standard dilution buffer into the control (zero) well.
4.Add 0.1 ml of properly diluted sample ( Human serum, plasma, tissue homogenates and other biological fluids.) into test sample wells.
5.Seal the plate with a cover and incubate at 37 °C for 90 min.
6.Remove the cover and discard the plate content, clap the plate on the absorbent filter papers or other absorbent material. Do NOT let the wells completely dry at any time. Wash plate X2.
7.Add 0.1 ml of Biotin- detection antibody working solution into the above wells (standard, test sample & zero wells). Add the solution at the bottom of each well without touching the side wall.
8.Seal the plate with a cover and incubate at 37°C for 60 min.
9.Remove the cover, and wash plate 3 times with Wash buffer. Let wash buffer rest in wells for 1 min between each wash.
10.Add 0.1 ml of SABC working solution into each well, cover the plate and incubate at 37°C for 30 min.
11.Remove the cover and wash plate 5 times with Wash buffer, and each time let the wash buffer stay in the wells for 1-2 min.
12.Add 90 µl of TMB substrate into each well, cover the plate and incubate at 37°C in dark within 10-20 min. (Note: This incubation time is for reference use only, the optimal time should be determined by end user.) And the shades of blue can be seen in the first 3-4 wells (with most concentrated standard solutions), the other wells show no obvious color.
13.Add 50 µl of Stop solution into each well and mix thoroughly. The color changes into yellow immediately.
14. Read the O.D. absorbance at 450 nm in a microplate reader immediately after adding the stop solution.

When carrying out an ELISA assay it is important to prepare your samples in order to achieve the best possible results. Below we have a list of procedures for the preparation of samples for different sample types.

Sample TypeProtocol
SerumIf using serum separator tubes, allow samples to clot for 30 minutes at room temperature. Centrifuge for 10 minutes at 1,000x g. Collect the serum fraction and assay promptly or aliquot and store the samples at -80°C. Avoid multiple freeze-thaw cycles.

If serum separator tubes are not being used, allow samples to clot overnight at 2-8°C. Centrifuge for 10 minutes at 1,000x g. Remove serum and assay promptly or aliquot and store the samples at -80°C. Avoid multiple freeze-thaw cycles.

PlasmaCollect plasma using EDTA or heparin as an anticoagulant. Centrifuge samples at 4°C for 15 mins at 1000 × g within 30 mins of collection. Collect the plasma fraction and assay promptly or aliquot and store the samples at -80°C. Avoid multiple freeze-thaw cycles. Note: Over haemolysed samples are not suitable for use with this kit.
Urine & Cerebrospinal FluidCollect the urine (mid-stream) in a sterile container, centrifuge for 20 mins at 2000-3000 rpm. Remove supernatant and assay immediately. If any precipitation is detected, repeat the centrifugation step. A similar protocol can be used for cerebrospinal fluid.
Cell culture supernatantCollect the cell culture media by pipette, followed by centrifugation at 4°C for 20 mins at 1500 rpm. Collect the clear supernatant and assay immediately.
Cell lysatesSolubilize cells in lysis buffer and allow to sit on ice for 30 minutes. Centrifuge tubes at 14,000 x g for 5 minutes to remove insoluble material. Aliquot the supernatant into a new tube and discard the remaining whole cell extract. Quantify total protein concentration using a total protein assay. Assay immediately or aliquot and store at ≤ -20 °C.
Tissue homogenatesThe preparation of tissue homogenates will vary depending upon tissue type. Rinse tissue with 1X PBS to remove excess blood & homogenize in 20ml of 1X PBS (including protease inhibitors) and store overnight at ≤ -20°C. Two freeze-thaw cycles are required to break the cell membranes. To further disrupt the cell membranes you can sonicate the samples. Centrifuge homogenates for 5 mins at 5000xg. Remove the supernatant and assay immediately or aliquot and store at -20°C or -80°C.
Tissue lysatesRinse tissue with PBS, cut into 1-2 mm pieces, and homogenize with a tissue homogenizer in PBS. Add an equal volume of RIPA buffer containing protease inhibitors and lyse tissues at room temperature for 30 minutes with gentle agitation. Centrifuge to remove debris. Quantify total protein concentration using a total protein assay. Assay immediately or aliquot and store at ≤ -20 °C.
Breast MilkCollect milk samples and centrifuge at 10,000 x g for 60 min at 4°C. Aliquot the supernatant and assay. For long term use, store samples at -80°C. Minimize freeze/thaw cycles.

Related Products