null

Estradiol ELISA Kit

SKU:
UNFI0011
Product Type:
ELISA Kit
Size:
96 Assays
Sensitivity:
7.5pg/ml
Range:
12.5-800pg/ml
ELISA Type:
Competitive
Synonyms:
E2, Estradiol
Reactivity:
Universal
€649
Frequently bought together:

Description

Estradiol ELISA Kit

system_update_alt Datasheet system_update_alt MSDS

Key Features

Save Time Pre-coated 96 well plate
Quick Start Kit includes all necessary reagents
Publication Ready Reproducible and reliable results

Overview

Product Name:

E2 (Estradiol) ELISA Kit

Product Code:

UNFI0011

Size:

96 Assays

Target:

E2

Alias:

E2, Estradiol

Reactivity:

Universal

Detection Method:

Competitive ELISA, Coated with Antibody

Sensitivity:

7.5pg/ml

Range:

12.5-800pg/ml

Storage:

4°C for 6 months

Note:

For Research Use Only

Additional Information

Recovery:

Matrices listed below were spiked with certain level of E2 and the recovery rates were calculated by comparing the measured value to the expected amount of E2 in samples.

Matrix

Recovery Range (%)

Average (%)

serum(n=5)

87-103

95

EDTA plasma(n=5)

91-105

98

UFH plasma(n=5)

88-104

99

Linearity:

The linearity of the kit was assayed by testing samples spiked with appropriate concentration of E2 and their serial dilutions. The results were demonstrated by the percentage of calculated concentration to the expected.

Sample

1:2

1:4

1:8

serum(n=5)

85-101%

97-103%

88-100%

EDTA plasma(n=5)

85-101%

84-101%

85-100%

UFH plasma(n=5)

81-96%

88-98%

82-95%

Intra-Assay:

CV <8%

Inter-Assay:

CV <10%

Protocol

*Note: Protocols are specific to each batch/lot. For the correct instructions please follow the protocol included in your kit.

Step Procedure

1.

Set standard, test sample and control (zero) wells on the pre-coatedplate respectively, and then, record their positions. It isrecommended to measure each standard and sample in duplicate. Washplate 2 times before adding standard, sample and control (zero) wells!

2.

Add Sample and Biotin-detection antibody: Add 50µL of Standard, Blank or Sample per well. The blankwell is added with Sample Dilution Buffer. Immediately add 50 µL of biotin-labelled antibody workingsolution to each well. Cover with the plate sealer provided. Gently tap the plate to ensure thoroughmixing. Incubate for 45 minutes at 37°C. (Solutions are added to the bottom of micro-ELISA platewell, avoid touching plate walls and foaming).

3.

Wash: Aspirate each well and wash, repeating the process three timesWash by filling each well with Wash Buffer (approximately 350µL)using a squirt bottle, multi-channel pipette, manifold dispenser orautomated washer. Complete removal of liquid at each step is essentialto good performance. After the last wash, remove any remaining WashBuffer by aspirating or decanting. Invert the plate and pat it againstthick clean absorbent paper.

4.

HRP-Streptavidin Conjugate(SABC): Add 100µL of SABC workingsolution to each well. Cover with a new Plate sealer. Incubate for30minutes at 37°C.

5.

Wash: Repeat the aspiration/wash process for five times.

6.

TMB Substrate: Add 90µL of TMB Substrate to each well. Coverwith a new Plate sealer. Incubate for about 10-20 minutes at 37°C.Protect from light. The reaction time can be shortened or extendedaccording to the actual color change, but not more than 30minutes.When apparent gradient appeared in standard wells, you can terminatethe reaction.

7.

Stop: Add 50µL of Stop Solution to each well. Color turn toyellow immediately. The adding order of stop solution should be as thesame as the substrate solution.

8.

OD Measurement: Determine the optical density (OD Value) of each wellat once, using a microplate reader set to 450 nm. You should open themicroplate reader ahead, preheat the instrument, and set the testing parameters.

Sample Preparation

When carrying out an ELISA assay it is important to prepare your samples in order to achieve the best possible results. Below we have a list of procedures for the preparation of samples for different sample types.

Sample Type Protocol

Serum

If using serum separator tubes, allow samples to clot for 30 minutes at room temperature. Centrifuge for 10 minutes at 1,000x g. Collect the serum fraction and assay promptly or aliquot and store the samples at -80°C. Avoid multiple freeze-thaw cycles.

If serum separator tubes are not being used, allow samples to clot overnight at 2-8°C. Centrifuge for 10 minutes at 1,000x g. Remove serum and assay promptly or aliquot and store the samples at -80°C. Avoid multiple freeze-thaw cycles.

Plasma

Collect plasma using EDTA or heparin as an anticoagulant. Centrifuge samples at 4°C for 15 mins at 1000 × g within 30 mins of collection. Collect the plasma fraction and assay promptly or aliquot and store the samples at -80°C. Avoid multiple freeze-thaw cycles. Note: Over haemolysed samples are not suitable for use with this kit.

Urine & Cerebrospinal Fluid

Collect the urine (mid-stream) in a sterile container, centrifuge for 20 mins at 2000-3000 rpm. Remove supernatant and assay immediately. If any precipitation is detected, repeat the centrifugation step. A similar protocol can be used for cerebrospinal fluid.

Cell culture supernatant

Collect the cell culture media by pipette, followed by centrifugation at 4°C for 20 mins at 1500 rpm. Collect the clear supernatant and assay immediately.

Cell lysates

Solubilize cells in lysis buffer and allow to sit on ice for 30 minutes. Centrifuge tubes at 14,000 x g for 5 minutes to remove insoluble material. Aliquot the supernatant into a new tube and discard the remaining whole cell extract. Quantify total protein concentration using a total protein assay. Assay immediately or aliquot and store at ≤ -20 °C.

Tissue homogenates

The preparation of tissue homogenates will vary depending upon tissue type. Rinse tissue with 1X PBS to remove excess blood & homogenize in 20ml of 1X PBS (including protease inhibitors) and store overnight at ≤ -20°C. Two freeze-thaw cycles are required to break the cell membranes. To further disrupt the cell membranes you can sonicate the samples. Centrifuge homogenates for 5 mins at 5000xg. Remove the supernatant and assay immediately or aliquot and store at -20°C or -80°C.

Tissue lysates

Rinse tissue with PBS, cut into 1-2 mm pieces, and homogenize with a tissue homogenizer in PBS. Add an equal volume of RIPA buffer containing protease inhibitors and lyse tissues at room temperature for 30 minutes with gentle agitation. Centrifuge to remove debris. Quantify total protein concentration using a total protein assay. Assay immediately or aliquot and store at ≤ -20 °C

Breast Milk

Collect milk samples and centrifuge at 10,000 x g for 60 min at 4°C. Aliquot the supernatant and assay. For long term use, store samples at -80°C. Minimize freeze/thaw cycles.

Estradiol Background

Estradiol, a hormone belonging to the group of estrogens, plays a crucial role in the female reproductive system and overall physiology. It is primarily produced in the ovaries and influences various aspects of female health and development.

Estradiol Function

Estradiol is responsible for the development of secondary sexual characteristics in females during puberty. It promotes the growth of breasts, widening of hips, and the emergence of pubic and underarm hair. Additionally, estradiol helps regulate the menstrual cycle by supporting the growth of the uterine lining and triggering ovulation. It also plays a vital role in maintaining bone density, preventing excessive bone loss, and promoting cardiovascular health by regulating cholesterol levels and supporting proper blood vessel function.

Estradiol's Role in Menopause

During menopause, estradiol levels decrease significantly. This hormonal shift can lead to various symptoms such as hot flashes and mood changes. Reduced estradiol levels also contribute to the development of osteoporosis, a condition characterized by weakened bones. Hormone replacement therapy (HRT) may be prescribed to alleviate menopausal symptoms and reduce the risk of associated health conditions. By supplementing estradiol, HRT helps restore hormonal balance and mitigate the effects of low hormone levels.

Estradiol & Estrogen

Estradiol is a specific type of estrogen hormone. While estradiol is primarily associated with female physiology, it also plays a role in male physiology, albeit in smaller quantities. Estrogen, on the other hand, is a broader term that encompasses various hormones, including estradiol. So, while estradiol is a specific type of estrogen, estrogen refers to a group of hormones that includes estradiol, estriol, and estrone.

Estradiol FAQs

What is the Estradiol ELISA Kit?

The Estradiol ELISA Kit is a specialized assay kit designed for the accurate measurement of estradiol levels in biological samples.

What are the advantages of using the Estradiol ELISA Kit?

The Estradiol ELISA Kit provides a highly sensitive and specific method for detecting estradiol levels, ensuring reliable and precise results. The kit is designed to deliver accurate measurements within a wide dynamic range, allowing for the detection of both low and high concentrations of estradiol.

Where can I find more information about the Estradiol ELISA Kit?

For more detailed information about the Estradiol ELISA Kit, including technical specifications, performance characteristics, and ordering details, please refer to the product brochure or contact our customer support team. We are here to assist you with any inquiries you may have.