Bovine Gamma-Aminobutyric acid (GABA) ELISA Kit
- SKU:
- BOEB1223
- Product Type:
- ELISA Kit
- Size:
- 96 Assays
- Range:
- 1.56-100 ng/mL
- ELISA Type:
- Competitive
- Reactivity:
- Bovine
Description
Bovine Gamma-Aminobutyric acid (GABA) ELISA Kit
Key Features
Save Time | Pre-coated 96 well plate | |
Quick Start | Kit includes all necessary reagents | |
Publication Ready | Reproducible and reliable results |
Overview
Product Name: | Bovine Gamma-Aminobutyric acid (GABA) ELISA Kit |
Product Code: | BOEB1223 |
Size: | 96 Assays |
Alias: | Gamma-Aminobutyric acid, GABA |
Detection Method: | Competitive |
Reactivity: | General |
Range: | 1.56-100 ng/mL |
Storage: | Please see kit components below for exact storage details |
Note: | For Research Use Only |
Kit Components
Component | Quantity | Storage |
ELISA Microplate (Dismountable) | 8x12 strips | -20°C |
Lyophilized Standard | 2 | -20°C |
Sample Diluent | 20ml | -20°C |
Assay Diluent A | 10mL | -20°C |
Assay Diluent B | 10ml | -20°C |
Detection Reagent A | 60µL | -20°C |
Detection Reagent B | 120µL | -20°C |
Wash Buffer (25X) | 30ml | 4°C |
Substrate | 10mL | 4°C |
Stop Solution | 10ml | 4°C |
Plate Sealer | 5 | - |
Other materials required:
- Microplate reader with 450 nm wavelength filter
- Multichannel Pipette, Pipette, microcentrifuge tubes and disposable pipette tips
- Incubator
- Deionized or distilled water
- Absorbent paper
- Buffer resevoir
Protocol
*Note: The below protocol is a sample protocol. Protocols are specific to each batch/lot. For the correct instructions please follow the protocol included in your kit.
Step | Procedure |
1. | Add 50µL of Standard, Blank, or Sample per well. The blank well is added with Sample diluent. Solutions are added to the bottom of micro ELISA plate well, avoid inside wall touching and foaming as possible. |
2. | Immediately add 50µL of Detection Reagent A working solution to each well. Cover with the Plate sealer. Gently tap the plate to ensure thorough mixing. Incubate for 1 hour at 37°C. Note: if Detection Reagent A appears cloudy warm to room temperature until solution is uniform. |
3. | Aspirate each well and wash, repeating the process three times. Wash by filling each well with Wash Buffer (approximately 400µL) (a squirt bottle, multi-channel pipette, manifold dispenser or automated washer are needed) and let it sit in the well for 1-2 minutes. Complete removal of liquid at each step is essential. After the last wash, completely remove remaining Wash Buffer by aspirating or decanting. Invert the plate and pat it against thick clean absorbent paper. |
4. | Add 100µL of Detection Reagent B working solution to each well. Cover with the Plate sealer. Incubate for 45 minutes at 37°C. |
5. | Repeat the wash process for five times as conducted in step 3. |
6. | Add 90µL of Substrate Solution to each well. Cover with a new Plate sealer and incubate for 10-20 minutes at 37°C. Protect the plate from light. The reaction time can be shortened or extended according to the actual color change, but this should not exceed more than 30 minutes. When apparent gradient appears in standard wells, user should terminate the reaction. |
7. | Add 50µL of Stop Solution to each well. If color change does not appear uniform, gently tap the plate to ensure thorough mixing. |
8. | Determine the optical density (OD value) of each well at once, using amicro-plate reader set to 450 nm. User should open the micro-plate reader in advance, preheat the instrument, and set the testing parameters. |
9. | After experiment, store all reagents according to the specified storage temperature respectively until their expiry. |
Sample Preparation
When carrying out an ELISA assay it is important to prepare your samples in order to achieve the best possible results. Below we have a list of procedures for the preparation of samples for different sample types.
Sample Type | Protocol |
Serum | If using serum separator tubes, allow samples to clot for 30 minutes at room temperature. Centrifuge for 10 minutes at 1,000x g. Collect the serum fraction and assay promptly or aliquot and store the samples at -80°C. Avoid multiple freeze-thaw cycles. If serum separator tubes are not being used, allow samples to clot overnight at 2-8°C. Centrifuge for 10 minutes at 1,000x g. Remove serum and assay promptly or aliquot and store the samples at -80°C. Avoid multiple freeze-thaw cycles. |
Plasma | Collect plasma using EDTA or heparin as an anticoagulant. Centrifuge samples at 4°C for 15 mins at 1000 × g within 30 mins of collection. Collect the plasma fraction and assay promptly or aliquot and store the samples at -80°C. Avoid multiple freeze-thaw cycles. Note: Over haemolysed samples are not suitable for use with this kit. |
Urine & Cerebrospinal Fluid | Collect the urine (mid-stream) in a sterile container, centrifuge for 20 mins at 2000-3000 rpm. Remove supernatant and assay immediately. If any precipitation is detected, repeat the centrifugation step. A similar protocol can be used for cerebrospinal fluid. |
Cell culture supernatant | Collect the cell culture media by pipette, followed by centrifugation at 4°C for 20 mins at 1500 rpm. Collect the clear supernatant and assay immediately. |
Cell lysates | Solubilize cells in lysis buffer and allow to sit on ice for 30 minutes. Centrifuge tubes at 14,000 x g for 5 minutes to remove insoluble material. Aliquot the supernatant into a new tube and discard the remaining whole cell extract. Quantify total protein concentration using a total protein assay. Assay immediately or aliquot and store at ≤ -20 °C. |
Tissue homogenates | The preparation of tissue homogenates will vary depending upon tissue type. Rinse tissue with 1X PBS to remove excess blood & homogenize in 20ml of 1X PBS (including protease inhibitors) and store overnight at ≤ -20°C. Two freeze-thaw cycles are required to break the cell membranes. To further disrupt the cell membranes you can sonicate the samples. Centrifuge homogenates for 5 mins at 5000xg. Remove the supernatant and assay immediately or aliquot and store at -20°C or -80°C. |
Tissue lysates | Rinse tissue with PBS, cut into 1-2 mm pieces, and homogenize with a tissue homogenizer in PBS. Add an equal volume of RIPA buffer containing protease inhibitors and lyse tissues at room temperature for 30 minutes with gentle agitation. Centrifuge to remove debris. Quantify total protein concentration using a total protein assay. Assay immediately or aliquot and store at ≤ -20 °C |
Breast Milk | Collect milk samples and centrifuge at 10,000 x g for 60 min at 4°C. Aliquot the supernatant and assay. For long term use, store samples at -80°C. Minimize freeze/thaw cycles. |
Bovine GABA Background
Bovine Gamma-Aminobutyric acid (GABA) is a naturally occurring neurotransmitter found in the central nervous system (CNS) of bovines, which includes cattle, such as cows and bulls. GABA is an amino acid derivative that acts as an inhibitory neurotransmitter, meaning it has a role in regulating and reducing neuronal excitability in the brain.
GABA in the CNS
In the CNS, GABA acts as a chemical messenger between nerve cells, or neurons. It binds to specific receptors on the surface of neurons called GABA receptors, which are classified into two main types: GABA-A receptors and GABA-B receptors. Activation of GABA receptors leads to the opening of ion channels, which results in the flow of negatively charged ions into the neuron, thereby reducing its excitability.
GABA plays a critical role in maintaining the balance between excitation and inhibition in the brain. It helps prevent excessive neuronal activity, which can lead to seizures, anxiety, and other neurological disorders. GABA is involved in regulating various physiological processes, including motor control, cognition, sleep, and mood.
The concentration of GABA in the brain is tightly regulated, and imbalances in GABA levels have been associated with several neurological conditions. For example, reduced GABA levels or impaired GABAergic transmission have been implicated in epilepsy, anxiety disorders, depression, and schizophrenia. On the other hand, increased GABAergic activity has been observed in conditions like Parkinson's disease and Huntington's disease.
Bovine GABA FAQs
What is the Bovine GABA ELISA Kit used for?
The Bovine GABA ELISA Kit is specifically designed for the quantitative detection of Gamma-Aminobutyric acid (GABA) in bovine samples. It provides a reliable and accurate measurement of GABA levels, allowing researchers to study its role in bovine physiology and pathophysiology.
What are the advantages of using the Bovine GABA ELISA Kit?
The Bovine GABA ELISA Kit provides specific and reliable measurements of Gamma-Aminobutyric acid (GABA) in bovine samples. It offers high sensitivity for detecting low levels of GABA, and its ELISA format allows for convenient and simultaneous analysis of multiple samples.
Where can I find more information about the Bovine GABA ELISA Kit?
For more detailed information about the Bovine GABA ELISA Kit, including technical specifications, performance characteristics, and ordering details, please refer to the product brochure or contact our customer support team. We are here to assist you with any inquiries you may have.